Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 28796-2021 PDF English

US$170.00 · In stock · Download in 9 seconds
GB/T 28796-2021: Craft crystal decoration
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

GB/T 28796: Historical versions

Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 28796-2021170 Add to Cart Auto, 9 seconds. Craft crystal decoration Valid
GB/T 28796-2012359 Add to Cart 3 days Craft crystal decoration Obsolete

Similar standards

GB/T 28485   GB 28480   GB/T 28021   GB/T 19720   

GB/T 28796-2021: Craft crystal decoration

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT28796-2021
NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 97.195 CCS Y 88 Replacing GB/T 28796-2012 Craft crystal decoration Issued on. OCTOBER 11, 2021 Implemented on. MAY 01, 2022 Issued by. State Administration for Market Regulation; Standardization Administration of the People's Republic of China.

Table of Contents

Foreword... 3 1 Scope... 5 2 Normative references... 5 3 Terms and definitions... 5 4 Requirements... 6 5 Test methods... 7 6 Inspection rules... 9 7 Marking, packaging, transportation, storage... 10

Foreword

This Standard was drafted in accordance with the rules given in GB/T 1.1-2020 “Directives for standardization - Part 1.Rules for the structure and drafting of standardizing documents”. This Standard replaces GB/T 28796-2012 “Craft crystal decoration”. Compared with GB/T 28796-2012, in addition to structural and editorial changes, the main technical changes are as follows. a) Delete “Product classification” and "Quartz glass" from “1 Scope” (see Chapter 1 of this Edition, Chapter 1 of Edition 2012); b) Delete “GB/T 16552 Gems - Nomenclature” and “GB/T 7962.12 Test methods of colourless optical glass - Part 12.Spectral internal transmittance” from “2 Normative references” (see Chapter 2 of this Edition, Chapter 2 of Edition 2012); c) Modify the terms in terms and definitions (see 3.1, 3.2, 3.3, 3.4 of this Edition, 3.1, 3.2, 3.3, 3.4 and 3.5 of Edition 2012); d) Delete “Classification” (see Chapter 4 of Edition 2012); e) Delete grading indicators in the requirements; Only specify the minimum quality requirements (see 4.1, 4.2, 4.3 of this Edition, 5.1, 5.2, 5.3 of Edition 2012); f) Delete “Detection method 2" for surface roughness (see 6.2.1.3 of Edition 2012); g) Modify the transmittance test method (see 5.2.2.1, 5.2.2.2, 5.2.2.3 of this Edition, 6.2.2 of Edition 2012); h) Modify the test method for "limited hazardous substances" (see 5.5 of this Edition, 6.5 of Edition 2012); i) Modify the sampling rules; Delete the provisions of “take 1% of the sample” (see 7.1.2 of Edition 2012); j) Delete the item of “surface roughness” from the exit-factory inspection items (see 6.1.3 of this Edition, 7.1.3 of Edition 2012); k) Add the classification of type inspection items (see 6.2.4 of this Edition); l) Modify the determination rules (see 6.3 of this Edition, 7.3 of Edition 2012). This Standard was proposed by China National Light Industry Federation. This Standard shall be under the jurisdiction of National Technical Committee on Daily Glass of Standardization Administration of China (SAC/TC 377). The drafting organizations of this Standard. Pujiang Dongzhou Crystal Co., Ltd., Zhejiang Pujiang Jingsheng Crystal Co., Ltd., Pujiang Saier Craft Co., Ltd., Zhejiang Pujiang Huade Crystal Technology Co., Ltd., Pujiang Hongbai Zhoushi Crystal Co., Ltd., Pujiang Hengcheng Industry and Trade Co., Ltd., Xingbi Group Co., Ltd., Zhejiang Yahua Tianji Jewelry Co., Ltd., Pujiang Jingdi Crystal Co., Ltd., Zhejiang Yiao Crystal Jewelry Co., Ltd., Yangzhou Boyixiang Crafts Co., Ltd., Pujiang Xiaoqiao Crystal Crafts Co., Ltd., Pujiang County Product Commodity Inspection and Testing Research Institute, Zhejiang Crystal Craft Products Association. Main drafters of this Standard. Wang Shudong, Dewey, Zhang Fumin, Zhang Jun, Zhang Bijun, Zhou Shuangsheng, Chen Shuibao, Wang Yuancheng, Chen Weixiang, Nie Xiaobin, Jiang Jianhua, Liang Jihong, Zhu Dongsheng, Huang Xianlian, Li Li. Versions of standard substituted by this Standard are. - GB/T 28796-2012 was first issued in 2012; - This is the first revision. Craft crystal decoration

1 Scope

This Standard specifies the terms and definitions, requirements, test methods, inspection rules, marking, packaging, transportation and storage for craft crystal decoration. This Standard applies to craft crystal decoration (hereinafter referred to as the decoration) that takes synthetic crystal, crystal glass and natural crystal as the main raw materials.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 191, Packaging and storage marks GB/T 7962.1, Test methods of colourless optical glass - Part 1.Refractive index and coefficient of dispersion GB 28480, Adornment - Provision for limit of baneful elements

3 Terms and definitions

For the purposes of this document, the following terms and definitions apply. 3.1 craft crystal decoration with synthetic crystal, crystal glass and natural crystal as the main raw materials, the artworks, handicrafts, decorations and daily necessities that are made by mechanical and manual processing and assembly such as thermoforming, cutting, grinding and polishing 3.3 crystal glass glass used to make fine utensils, art and decorations; it has high transparency, good surface gloss, is crystal clear; after thermoforming, cutting, grinding, polishing and other mechanical or manual processing, it shows good light and color characteristics 3.4 rock crystal a crystalline mineral with silica as the main component produced under specific natural conditions; most of the colors are colorless and transparent, purple, brown, green and so on; and most of them contain hair-like crystals, bubbles, impurities and crystal turbidity

4 Requirements

4.1 Appearance quality The appearance quality shall meet the requirements of Table 1. 4.2 Physical properties The physical properties of finely ground and polished jewelry shall meet the requirements in Table 2. 4.5 Hazardous substance limit The content of lead and cadmium in the jewelry shall meet the requirements of the limit of harmful elements of lead and cadmium in GB 28480.

5 Test methods

5.1 Appearance quality inspection Without the aid of an optical magnifying device, at a distance of 30cm, the test is carried out in a field of view with a black background under a fluorescent lamp with a light source intensity of 40W. 5.2 Surface processing characteristics 5.2.1 Surface roughness 5.2.2 Transmittance 5.2.2.1 Instrument Use a visible light transmittance tester. 5.2.2.2 Sample requirements 5.2.2.3 Test operation Boot 0.5h. After the instrument is stable, load the sample for testing. 5.2.3 Refractive index Carry out according to the method specified in GB/T 7962.1. 5.3 Dimensional tolerance Use a vernier caliper or altimeter with a division value of 0.02mm to measure. 5.4 Assembly requirements 5.4.1 The morphological position is visually observed against the pattern. 5.5 Hazardous substance limit 5.5.1 Sample preparation Select 10g~30g of sample after crushing. Use an agate mortar to grind until the particle size of the sample is less than 100μm (about 180 mesh). 5.5.4 Digestion of specimen 5.5.4.1 Place the weighed specimen in a 35mL platinum crucible. Moisten with a little distilled water. Add 8mL of hydrofluoric acid and 5mL of sulfuric acid (1+1). Heat slowly in a fume hood to decompose until smoking. 5.5.5 Specimen measurement Use atomic absorption spectrophotometry (flame method) to determine. Use the direct comparison method to perform quantification. 5.6 Color stability Use a 40W UV lamp (wavelength 253.7nm) to irradiate at a distance of 20cm from the surface of the decoration.

6 Inspection rules

6.1 Exit-factory inspection 6.1.1 Batching Products of the same variety, type and level produced in each shift are grouped as a batch. 6.1.4 Inspection methods Each batch of exit-factory inspection items must be accepted. If one item fails, the responsible department shall decide to scrap or re-inspect the batch after analyzing the specific failure situation. If the product resubmitted for inspection still fails to meet the requirements, the batch will be deemed rejected. 6.2 Type inspection 6.2.1 When designing a new product or improving the original product, when there is a major change in the production process, when there is a large difference between the exit-factory inspection and the last type inspection result, the type inspection shall be carried out. 6.2.4 Inspection item classification. 6.3 Determination rules When all inspection items are accepted, the batch of products shall be accepted. If an item in Class A fails, the batch of products shall be rejected.

7 Marking, packaging, transportation, storage

7.1 Marking The product or the outer packing box shall have the product name, product standard number, raw material name, quality grade, inspection certificate, enterprise name and address, quantity, net weight and other signs. 7.2 Packaging 7.3 Transportation The product shall not be violently collided or stressed during transportation. When loading and unloading, it shall be lightly loaded and unloaded. 7.4 Storage Products shall be stored indoors and placed on wooden shelves or boards. Direct sunlight is prohibited. Prevent moisture and heavy pressure. The products shall not be mixed with corrosive items. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 28796-2021 be delivered?Answer: The full copy PDF of English version of GB/T 28796-2021 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 28796-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 28796-2021_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 28796-2021 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version GB/T 28796-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 28796-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of GB/T 28796-2021?

A step-by-step guide to download PDF of GB/T 28796-2021_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 28796-2021".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9