GB/T 2423.2-2008 PDF EnglishUS$85.00 · In stock · Download in 9 seconds
GB/T 2423.2-2008: Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 2423.2: Historical versions
Similar standardsGB/T 2423.2-2008: Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT2423.2-2008 GB/T2423.2-2008 GB ICS 19.040 K 04 NATIONAL STANDARD GB/T 2423.2-2008 / IEC 60068-2-2.2007 Replacing GB/T 2423.2–2001 Issued on. DECEMBER 30, 2008 Implemented on. OCTOBER 01, 2009 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China; Standardization Administration of the People’s Republic of China. Table of ContentsForeword... 3 1 Scope... 5 2 Normative References... 5 3 Terms and definitions... 6 4 Application of tests for non heat-dissipating specimens versus tests for heat-dissipating specimens... 6 5 Test description... 8 6 Test procedure... 10 7 Information to be given in the relevant specification... 14 8 Information to be given in the test report... 14 Annex NB (Informative) Relationship of suffixes between tests A. cold and tests B. dry heat... 20ForewordGB/T 2423.2 is part 2 of GB/T 2423; the rest parts of GB/T 2423 are shown in Annex NA. This Part is identical to IEC 60068-2-2.2007 Environmental Testing - Part 2-1.Tests - Test B. Dry heat (English version). Compared with IEC 60068-2-2.2007, main changes of this Part are as follows. — Change the name of this Part to be Environmental testing for electric and electronic products - Part 2.Test methods - Tests B. Dry heat; — Change “this Standard” to be “this Part”; — Delete the foreword of IEC 60068-2-2.2007; — Delete the introduction of IEC 60068-2-2.2007; transferred the contents into Annex NB; — Add informative annex “Constituent parts of GB/T 2423” (see Annex NA); — Add informative annex “Test A. cold and test B. the relations between classification and small letter of high temperature” (see annex NB); — Delete “for non-heat dissipation test specimen” in section 1 of clause 1; — Add the reference GB/T 2423.22 in normative reference of clause 2; — Change the “non heat-dissipating specimen” as “test of non heat-dissipating specimen” in article 4.3; — Change the “absolute humidity” as “humidity” in 6.8.2. — For clarity, above revisions have been added with footnotes in relevant positions. This Part replaces GB/T 2423.2-2001 Environmental testing for electric and electronic and electronic products - Part 2.Test methods - Tests B. Dry heat. Comparison with previous edition, main changes are as follows. — Delete test Ba. Cold test of jump in temperature of non heat-dissipating specimen; — Delete test Bc. Dry heat test of jump in temperature of dissipating specimen; — Delete the annex A, B, C, D, E and F; — Add test Bc. Cold test of temperature jump of heat-dissipating specimen - test specimen should be charged with electricity during testing. Annex NA and NB of this Part are informative. This Part was proposed and under the jurisdiction of National Technical Committee (SAC/TC 8) on Environmental Conditions of Electric and Electronic Products and Environmental Test of Standardization Administration of China. The responsible drafting organization is Guangzhou Electric Apparatus Research Institute. The chief drafting staff of this Part. Zhang Zhiyong. The historical editions replaced by this Part are. — GB/T 2423.2-1981, GB/T 2423.2-1989, GB/T 2423.2-2001.1 ScopeThis Part of GB/T 2423 deals with dry heat tests applicable both to heat-dissipating and non heat dissipating specimens. Tests Bb and Bd do not deviate essentially from earlier issues.2 Normative ReferencesThe articles contained in the following documents have become part of this Part of GB/T 2423 when they are quoted herein. For the dated documents so quoted, all the modifications (excluding corrections) or revisions made thereafter shall not be applicable to this Standard. For the undated documents so quoted, the latest editions shall be applicable to this Standard. GB/T 2421 Environmental testing for electric and electronic products - Part 1. General and guidance (GB/T 2421-1999, idt IEC 60068-1.1988) GB/T 2423.22 Environmental testing for electric and electronic products - Part 2.Test methods Test N. Change of temperature (GB/T 2423.22-2002, IEC 60068-2-14.1984, IDT) GB/T 2424.1 Environmental testing for electric and electronic products - Guidance for high temperature and low temperature tests (GB/T 2424.1-2005, IEC 60068-3-1.1974, IDT) GB/T 2424.5 Environmental tests for electric and electronic products - Confirmation of the performance of temperature chambers (GB/T 2424.5-2006, IEC 60068-3-5.2001, IDT)3 Terms and definitionsFor the purposes of this document, the definitions given in GB/T 2422, as well as the following definitions, apply. 3.1 low air velocity in the working space velocity of conditioning airflow within a working space which is sufficient to maintain conditions but low enough so that the temperature at any point on the test specimen is not reduced by more than 5 K by the influence of the circulation of the air (if possible, not more than 0.5 m/s).4 Application of tests for non heat-dissipating specimens versus tests for heat-dissipating specimensTemperature chamber(s) are constructed and verified in accordance with specifications GB/T 2424.5 and GB/T 2424.7.5 Test descriptionTests Bb, Bd, and Be are similar. Differences are noted in Subclauses 5.2.2, 5.3.2 and 5.4.2.6 Test procedureGB/T 2424.5 provides guidance for the confirmation of performance of temperature test chambers. GB/T 2424.1 provides general guidance for the performance of Tests A and B.7 Information to be given in the relevant specificationWhen this test is included in the relevant specification, the following details shall be given as far as they are applicable.8 Information to be given in the test reportAs a minimum the test report shall show the following information. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 2423.2-2008 be delivered?Answer: The full copy PDF of English version of GB/T 2423.2-2008 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 2423.2-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2423.2-2008_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 2423.2-2008 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 2423.2-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2423.2-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 2423.2-2008?A step-by-step guide to download PDF of GB/T 2423.2-2008_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 2423.2-2008". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
