Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 22885-2008 PDF English

US$70.00 · In stock · Download in 9 seconds
GB/T 22885-2008: Leather -- Tests for colour fastness -- Colour fastness to water
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 22885-200870 Add to Cart Auto, 9 seconds. Leather -- Tests for colour fastness -- Colour fastness to water Valid

Similar standards

GB/T 22890.1   GB/T 22889   GB/T 22888   GB/T 22890.2   

GB/T 22885-2008: Leather -- Tests for colour fastness -- Colour fastness to water

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT22885-2008
NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 59.140.30 Y 46 Leather - Tests for colour fastness - Colour fastness to water (ISO 11642:1993, MOD) ISSUED ON: DECEMBER 30, 2008 IMPLEMENTED ON: SEPTEMBER 01, 2009 Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the PRC; Standardization Administration of the PRC.

Table of Contents

Foreword ... 3 1 Scope ... 5 2 Normative references ... 5 3 Principle ... 5 4 Reagents and materials ... 6 5 Apparatus ... 6 6 Procedure ... 6 7 Test report ... 7 Leather - Tests for colour fastness - Colour fastness to water

1 Scope

This Standard specifies a method for determining the colour fastness to water of leather. This Standard applies to all kinds of leather.

2 Normative references

The following documents contain provisions which, through reference in this Standard, constitute provisions of this Standard. For the dated references, their subsequent amendments (excluding corrections) or revisions do not apply to this Standard. However, the parties who enter into agreement based on this Standard are encouraged to investigate whether the latest editions of these documents are applicable. For undated reference documents, the latest editions apply to this Standard. GB/T 250 Textiles - Tests for colour fastness - Grey scale for assessing change in colour (GB/T 250-2008, ISO 105-A02:1993, IDT) GB/T 251 Textiles - Tests for colour fastness - Grey scale for assessing staining (GB/T 251-2008, ISO 105-A03:1993, IDT) GB/T 7568.7 Textiles - Tests for colour fastness - Standard adjacent fabrics - Part 7: Multifibre (GB/T 7568.7-2008, ISO 105-F10:1989, MOD) QB/T 2707 Leather - Physical and mechanical tests - Sample preparation and conditioning (QB/T 2707-2005, ISO 2419:2002, MOD)

3 Principle

A leather specimen is soaked in distilled water and a piece of adjacent fabric, also soaked in distilled water, laid against each side to be tested. The composite specimen is placed in a suitable apparatus and maintained at a certain temperature and pressure for a certain period of time. The leather specimen and adjacent fabric are then dried, and the change in colour of the specimen and the staining of the adjacent fabric assessed with the grey scales. 6.2 If the leather has no finish, or if it has a finish but is to be tested with the finish intact, simply cut out a test specimen measuring 100 mm×36 mm. 6.3 Cut out one or two pieces of adjacent fabric, also measuring 100 mm×36 mm. 6.4 Immerse the leather specimen and adjacent fabric(s) in distilled water in separate vessels. (If testing more than one specimen simultaneously, several pieces of adjacent fabric may be immersed in the same vessel, but each leather specimen shall be immersed in a separate vessel.) Place the vessels in the vacuum desiccator, produce a vacuum of 5 kPa within 4 min, and hold this vacuum for 2 min. Restore normal pressure. Repeat the procedure a further two times. Lay a piece of adjacent fabric out on a glass plate and cover it with the leather specimen, with the side under test facing down. If both sides are to be tested, cover the leather specimen with a second piece of adjacent fabric. Cover the composite specimen with a second glass plate. 6.5 Preheat the loading weight of 4.5 kg in the oven at 37 °C±2 °C for at least 1 h. Place the composite specimen, between the two glass plates, in the test apparatus and load it with the 4.5 kg weight. In order to allow excess distilled water to run off, tilt the apparatus about 30° to each side for a few seconds. (When testing several composite specimens simultaneously, take care to ensure that each is placed centrally between two plates in such a way that pressure is exerted evenly on it.) Place the loaded apparatus in the oven and leave at 37 °C±2 °C for 3 h. 6.6 At the end of the 3 h period, take off the load, remove the composite specimen from the apparatus, stitch it together at one corner, and dry it by hanging it in air under standard conditions as specified in QB/T 2707 (20 °C and 65% relative humidity), with the specimen and its adjacent fabric(s) in contact only at the point of stitching. 6.7 Assess the staining of each kind of fibre in the adjacent fabric(s), using the appropriate grey scale in accordance with GB/T 251, and also assess the change in colour of the specimen, using the grey scale in accordance with GB/T 250.

7 Test report

The test report shall include the following information: a) a reference to this Standard; b) a description of the type of leather tested; ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 22885-2008 be delivered?Answer: The full copy PDF of English version of GB/T 22885-2008 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 22885-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22885-2008_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 22885-2008 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB/T 22885-2008?

A step-by-step guide to download PDF of GB/T 22885-2008_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 22885-2008".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9