Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 22799-2019 PDF English

US$130.00 · In stock · Download in 9 seconds
GB/T 22799-2019: Test method for absorption of towel products
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

GB/T 22799: Historical versions

Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 22799-2019130 Add to Cart Auto, 9 seconds. Test method for absorption of towel products Valid
GB/T 22799-2009359 Add to Cart 3 days Test method for hygroscopicity of towel product Obsolete

Similar standards

GB/T 22798   GB/T 32610   GB/T 18830   GB/T 31128   

GB/T 22799-2019: Test method for absorption of towel products

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT22799-2019
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 97.160 W 55 Replacing GB/T 22799-2009 Test method for absorption of towel products ISSUED ON: DECEMBER 31, 2019 IMPLEMENTED ON: MAY 01, 2020 Issued by: State Administration for Market Regulation; Standardization Administration of the PRC.

Table of Contents

Foreword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Principle ... 4 4 Test conditions ... 4 5 Reagents or materials ... 5 6 Apparatus ... 5 7 Sample ... 6 8 Test procedures ... 7 9 Test data processing ... 9 10 Test report ... 9 Appendix A (Informative) Installation drawing of test apparatus for method B 11 Test method for absorption of towel products

1 Scope

This Standard specifies the test method for absorption of towel products. This Standard applies to all kinds of towel products using textile fibers as raw materials.

2 Normative references

The following documents are indispensable for the application of this document. For the dated references, only the editions with the dates indicated are applicable to this document. For the undated references, the latest edition (including all the amendments) are applicable to this document. GB/T 6529 Textiles - Standard atmospheres for conditioning and testing GB/T 8170 Rules of rounding off for numerical values and expression and judgement of limiting values GB/T 8629-2017 Textiles - Domestic washing and drying procedures for textile testing

3 Principle

3.1 Method A - Sedimentation method: After the sample is washed, dried and conditioned, under a standard state, measure the time required for the sample from contact with the water surface to completely wetted and begin to sink, to determine the absorption of the sample. 3.2 Method B - Absorption method: After the sample is washed, dried and conditioned, under a standard state, a certain amount of water flows through the sample within a specified time. Determine the percentage of the amount of water absorbed by the sample to the amount of original water as the water absorption rate of towel.

4 Test conditions

4.1 The environmental conditions for conditioning shall meet the requirements of standard atmospheres of GB/T 6529. 4.2 If pre-conditioning is required, it shall be carried out under atmospheric conditions with a relative humidity of 10%~25% and a temperature not exceeding 50 °C.

5 Reagents or materials

5.1 Accompanying laundry: USE type III (100% polyester fiber accompanying laundry) specified in GB/T 8629-2017. 5.2 Detergent: USE standard detergent 3 (ECE standard detergent 98) specified in GB/T 8629-2017.

6 Apparatus

6.1 Fully-automatic washing machine: Type A standard washing machine (see 5.1.1 in GB/T 8629-2017); front door charging; horizontal rolling type. Note: Other apparatus, which have been proven to give the same test results, can also be used. 6.2 Rotary tumble dryer: Tumble dryer used with type A standard washing machine (see 5.2 in GB/T 8629-2017). Note: Other dryers, which have been proven to give the same test results, can also be used. 6.3 Water flow tester: Funnels, valves, devices, pipelines and measuring cylinders installed on the water flow tester shall not obstruct the flowing out of water. The time difference from opening the valve to the water flowing out shall be less than 8.0 s. The composition of the water flow tester is shown in Figure 1, including the following components: a) Waterproof base: See Appendix A for dimensions and specifications; b) Waterproof circular retainer ring: The inner ring outer diameter is (150±2)mm; c) Measuring cylinder: Organic glass material; 50 mL; see E in Figure 1; d) Funnel: Polypropylene material; the inner diameter of the neck is (9.0±2.0)mm. 6.4 Beaker: Capacity is 1000 mL. ADD (20±1)g of standard detergent (5.2); WASH according to the procedures specified in Clause 9 of GB/T 8629-2017. 7.3 After washing, immediately put the sample and the accompanying laundry into the dryer; SET the drying temperature to (66±5)°C and dry the sample. 7.4 After the sample is dried, take it out immediately; SHAKE it gently to remove the lint; PICK up the lint and thread residue entangled on the towel. Expose the sample to the standard atmosphere for textile conditioning (see 4.2), until it reaches a constant weight (weigh continuously at 2 h intervals; when the mass change is not greater than 0.25%, it is considered to have reached a constant weight).

8 Test procedures

8.1 Method A - Sedimentation method 8.1.1 Along the diagonal direction of the sample (see Clause 7), respectively cut out test specimens with a size of 5 cm×5 cm; 1 group on the front and back respectively; each group shall include at least 3 test specimens. When sampling, it shall avoid decorative parts such as satin or embroidery. 8.1.2 USE a measuring cylinder (6.7) to take 800 mL of grade 3 water or deionized water. The water temperature is (20±2)°C. The water level is not less than 5 cm. 8.1.3 PLACE the test surface of the test specimen on the water surface in parallel and lightly without external force; START timing at the same time. When the sample is completely wetted and begins to sink, stop the timing and record the required time t, accurate to 0.1 s. If the sample is not completely wetted for more than 90 s, the test is terminated; the time required is recorded as greater than 90 s. 8.1.4 REPEAT the test according to 8.1.3. TEST 3 test specimens for the front and back respectively. 8.1.5 Calculate the measured average value of the front and back test specimens. According to GB/T 8170, round to one decimal place. 8.1.6 If 1 of the 6 test specimens exceeds 90 s, add 1 test specimen for this test surface. If the added test specimen does not exceed 90 s, calculate the average value of the 6 test specimens that do not exceed 90 s; and, indicate that 1 test specimen is greater than 90 s. If the added test specimen exceeds 90 s, the test is ended; the result is recorded as greater than 90 s. 8.2.7 REPEAT the steps 8.2.2~8.2.6 for the remaining 5 test specimens.

9 Test data processing

9.1 Method A - Sedimentation method According to formula (1), calculate the average value of the water absorption time of sample; ROUND to one decimal place according to GB/T 8170. Where: 𝑡̅ - The average water absorption time of sample, in seconds (s); ti - The water absorption time of each test specimen, in seconds (s); i - The number of test specimens, in pieces. 9.2 Method B - Absorption method According to formula (2), calculate the water absorption rate on the front and back of the sample, respectively. The result is expressed as the average value of the front and back; rounded to one decimal place according to GB/T 8170. Where: P - The water absorption rate of sample, %; m0 - The mass of the sink before the test, in grams (g); m1 - The mass of the sink after the test, in grams (g); d - The density of the water used for test, in grams per milliliter (g/mL).

10 Test report

The test report shall include the following: a) Standard number and method; ......

Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 22799-2019 be delivered?Answer: The full copy PDF of English version of GB/T 22799-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 22799-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22799-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 22799-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version GB/T 22799-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 22799-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of GB/T 22799-2019?

A step-by-step guide to download PDF of GB/T 22799-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 22799-2019".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9