GB/T 21510-2024 PDF EnglishUS$275.00 · In stock · Download in 9 seconds
GB/T 21510-2024: Antimicrobial property testing and evaluation methods for nano-inorganic materials Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 21510: Historical versions
Similar standardsGB/T 21510-2024: Antimicrobial property testing and evaluation methods for nano-inorganic materials---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT21510-2024 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 11.080.99 CCS G 70 Replacing GB/T 21510-2008 Antimicrobial property testing and evaluation methods for nano-inorganic materials Issued on. JULY 24, 2024 Implemented on. FEBRUARY 01, 2025 Issued by. State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of ContentsForeword... 3 1 Scope... 5 2 Normative references... 5 3 Terms and definitions... 5 4 Test method... 6 5 Antibacterial property evaluation... 7 6 Test report... 7 7 Safety operation requirements... 8 Appendix A (Normative) Test method for antibacterial property of powdered nano- inorganic materials - Oscillation method... 9 Appendix B (Normative) Test method for antibacterial properties of porous and non- porous materials containing nano-inorganic antibacterial components - Oscillation method... 14 Appendix C (Normative) Test method for antibacterial property of non-porous materials containing nano-inorganic antibacterial components - Film method... 16 Appendix D (Normative) Test method for antibacterial property of porous materials containing nano-inorganic antibacterial components - Absorption method... 19 Bibliography... 221 ScopeThis document specifies the test methods, antimicrobial property evaluation, test report and safety operation requirements for the antibacterial property of nano-inorganic materials. This document applies to nano-inorganic materials with antibacterial functions, as well as products with nano-inorganic materials as antibacterial components (structural units), such as fibers, fabrics, plastics, coatings and ceramics. The antibacterial property testing and evaluation of other materials can also be carried out in accordance with this document.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the version corresponding to that date is applicable to this document; for undated references, the latest version (including all amendments) is applicable to this document. GB 4789.2, National food safety standard -Microbiological examination of food. Aerobic plate count GB/T 30544 (all parts), Nanotechnologies - Vocabulary3 Terms and definitionsFor the purposes of this document, the following terms and definitions, as well as those given in GB/T 30544 (all parts), apply. 3.1 antibacterial The process of killing microorganisms such as bacteria and fungi and/or hindering their growth, reproduction and activity by chemical or physical methods.4 Test method4.1 Procedure 4.1.1 The test of the antibacterial property of powdered nano-inorganic materials shall be carried out according to the method specified in Appendix A. 4.2 Test data processing Multiply the number of colonies on each plate by the dilution factor to get the actual number of colonies recovered from the sample. 4.3 Calculation of test results 4.3.1 Calculation of colony counts Multiply the colony counts on each plate by the dilution factor to get the actual number of bacteria recovered from the sample. 4.3.3 Calculation of antibacterial logarithm value Calculate the antibacterial logarithm value according to Formula (2).5 Antibacterial property evaluationThe antibacterial property evaluation of products using nano-inorganic materials as antibacterial components (structural units) shall comply with the following regulations and indicate the bacterial species.6 Test reportThe test report shall include the following.7 Safety operation requirements7.1 All microbiological testing operations shall be carried out in a biological safety cabinet. 7.2 When dripping the bacterial liquid onto the sample, do not let it overflow outside the sample. 7.3 Before shaking, the conical flask shall be firmly fixed on the shaking table to avoid breakage.Appendix A(Normative) Test method for antibacterial property of powdered nano-inorganic materials - Oscillation method A.1 Applicability This test method applies to the determination of antibacterial property of powdered nano-inorganic materials. A.2 Test equipment and materials A.2.3 Culture medium and reagents A.2.3.1 Ordinary nutrient broth culture medium A.3 Test procedure A.3.1 Preparation of bacterial slants A.3.1.1 Bacterial activation Take a tube of dry culture; open it under sterile operation; add an appropriate amount of nutrient broth with a capillary pipette; gently pipette several times to melt and disperse the culture. Take a test tube containing 5.0 mL ~ 10.0 mL of nutrient broth; drop a small amount of bacterial suspension into it; culture it at 37 ℃ ± 1 ℃ for 18 h ~ 24 h. A.4 Test requirements A.4.1 The colony count of the control group at “0” contact time shall be between 1×104 cfu/mL and 5×104 cfu/mL. The negative control shall show no sterile growth. A.4.2 The control sample shall not have obvious antibacterial effect. After shaking, the number of colonies recovered in the control group shall not be less than 1×103 cfu/mL, otherwise the test will be invalid.Appendix B(Normative) Test method for antibacterial properties of porous and non-porous materials containing nano-inorganic antibacterial components - Oscillation method B.1 Applicability This test method is applicable to the determination of the antibacterial property of porous and non-porous materials (including dissolvable and non-dissolvable fibers, fabrics, plastic powders, microporous filter materials, etc.) containing antibacterial components of nano-inorganic materials. B.2 Test equipment and materials B.3 Test procedure B.3.1 Preparation of bacterial slants The preparation of bacterial slant shall comply with the requirements of A.3.1. B.3.2 Test steps B.4 Test requirements The test requirements shall comply with the provisions of A.4.Appendix C(Normative) Test method for antibacterial property of non-porous materials containing nano- inorganic antibacterial components - Film method C.1 Applicability This test method is applicable to the determination of the antibacterial property of non- porous materials (such as plastics, ceramics, paint films, plates, metals and other hard surface materials) containing antibacterial components of nano-inorganic materials. C.2 Test equipment and materials C.3 Test procedure C.3.1 Preparation of bacterial slants The preparation of bacterial slant shall comply with the requirements of A.3.1. C.3.2 Test steps C.3.2.1 Preparation of covering film The covering film is made of polyethylene film with a size of (40±2) mm × (40±2) mm and a thickness of 0.05 mm ~ 0.10 mm. If the test sample is small, the size of the covering film can be reduced according to its surface area to prevent the bacterial suspension from overflowing. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 21510-2024 be delivered?Answer: The full copy PDF of English version of GB/T 21510-2024 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 21510-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 21510-2024_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 21510-2024 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 21510-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 21510-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 21510-2024?A step-by-step guide to download PDF of GB/T 21510-2024_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 21510-2024". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
