GB/T 21284-2015 PDF EnglishUS$85.00 · In stock · Download in 9 seconds
GB/T 21284-2015: Footwear -- Test methods for whole shoe -- Thermal insulation Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 21284: Historical versions
Similar standardsGB/T 21284-2015: Footwear -- Test methods for whole shoe -- Thermal insulation---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT21284-2015GB NATIONAL STANDARD OF THE PEOPLE'S REPUBLIC OF CHINA ICS 61.060 Y 78 GB/T 21284-2015 / ISO 20877.2011 Replacing GB/T 21284-2007 Footwear — Test methods for whole shoe — Thermal insulation (ISO 20877.2011, IDT) Issued on: SEPTEMBER 11, 2015 Implemented on: APRIL 1, 2016 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of the People's Republic of China. Table of ContentsForeword... 3 1 Scope... 5 2 Normative references... 5 3 Terms and definitions... 5 4 Apparatus and material... 5 5 Sampling and conditioning... 6 6 Test method... 6 7 Test report... 6 Annex A (Informative) Determination of insulation against heat... 8 Annex B (Informative) Assessment of footwear by the laboratory during testing of thermal behaviour... 13 Bibliography... 15ForewordThis Standard is drafted according to the rules given in GB/T 1.1-2009. This Standard replaces GB/T 21284-2007 “Footwear — Test methods for whole shoe — Thermal insulation”. Main differences between this Standard and GB/T 21284-2007 are as follows. — MODIFY the scope; — MODIFY the definition of heat insulation INTO the definition of thermal insulation; — ADD the apparatus and test method of insulation against heat; — ADD the informative Annex A “Determination of insulation against heat”; — ADD the informative Annex B “Assessment of footwear by the laboratory during testing of thermal behaviour”; — ADD the bibliography. This Standard uses translation method to identically adopt the international standard ISO 20877.2011, Footwear — Test methods for whole shoe — Thermal insulation. Corresponding Chinese documents of the international document in the normative reference of this Standard are as follows. — GB/T 2703-2008 Footwear — Vocabulary (ISO 19952.2005, NEQ) — GB/T 20991-2007 Personal protective equipment — Test methods for footwear (ISO 20344.2004, MOD) Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. This Standard was proposed by China Light Industry Council. This Standard shall be under the jurisdiction of National Technical Committee on Footwear (SAC/TC 305). Drafting organizations of this Standard. Shanghai Warrior Shoes Co., Ltd., China Leather and Footwear Industry Research Institute, Shenzhen IMPAQ Testing Technology Co., Ltd., Tongxiang Forworld Shoes Co., Ltd. Main drafters of this Standard. Ma Lin, Kong Lei, Yan Xiaobing and Li Bin. Footwear — Test methods for whole shoe — Thermal insulation1 ScopeThis Standard specifies a method for measuring insulation of footwear against heat or cold, in order to provide information for assessing footwear comfort. This Standard is applicable to all types of closed footwear or boots except for footwear used as personal protective equipment. It does not address safety aspects.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 19952 Footwear — Vocabulary ISO 20344.2011 Personal protective equipment — Test methods for footwear3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 19952 and the following apply. 3.1 thermal insulation Temperature difference on the inner surface of the vamp or insocks, or both, under specific test conditions.4 Apparatus and material4.1 General The following apparatus and material shall be used. 4.2 Insulation against cold Bibliography [1] ISO 3290-1.2008 Rolling bearing - Balls - Dimensions and tolerances, corresponding to GB/T 308.1-2013 “Rolling bearings - Balls - Part 1.Steel balls” (ISO 3290-1.2008, NEQ) [2] ISO 4649.2010 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device, corresponding to GB/T 9867- 2008 “Rubber vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device” (ISO 4649.2002, IDT) ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 21284-2015 be delivered?Answer: The full copy PDF of English version of GB/T 21284-2015 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 21284-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 21284-2015_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 21284-2015 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 21284-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 21284-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 21284-2015?A step-by-step guide to download PDF of GB/T 21284-2015_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 21284-2015". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
