GB/T 2079-2015 PDF EnglishUS$130.00 · In stock · Download in 9 seconds
GB/T 2079-2015: Indexable hard metal (carbide) inserts with rounded corners, without fixing hole -- Dimensions Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 2079: Historical versions
GB/T 2079-2015: Indexable hard metal (carbide) inserts with rounded corners, without fixing hole -- Dimensions---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT2079-2015 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.160 H 70 GB/T 2079-2015 / ISO 883.2013 Replacing GB/T 2079-1987 Indexable Hardmetal (Carbide) Inserts with Rounded Corners, without Fixing Hole – Dimensions (ISO 883.2013,IDT) Issued on: DECEMBER 10, 2015 Implemented on: JULY 1, 2016 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of PRC. Table of ContentsForeword ... 3 1 Scope ... 5 2 Normative References ... 5 3 Types of Insert ... 5 4 Interchangeability ... 6 5 Designation and Marking ... 7 6 Measurement ... 7 7 Recommended Dimension ... 7 Appendix A (Informative) Tolerances for d, m and s ... 12 Appendix B (Informative) Method of Measurement of “m” Dimension ... 13 Appendix C (Informative) Inserts with Rounded Corners with Rounded Corners, without Fixing Hole – Dimension Range Covered by This Standard ... 15 Appendix D (Informative) Relationship between Designations in this Standard and ISO 13399 (All Parts) ... 16ForewordThis Standard was drafted as per the rules specified in GB/T 1.1-2009. This Standard replaced GB/T 2079-1987 Indexable Hardmetal (Carbide) Inserts without Hole. Compared with GB/T 2079-1987, this Standard mainly has the following changes. --- Change the standard name into Indexable Hardmetal (Carbide) Inserts with Rounded Corners, without Fixing Hole; Dimensions; --- Delete the original Chapter 2, 3, 4; --- Add Chapter 2 “Normative References”; Chapter 3 “Types of Insert”; Chapter 4 ”Interchangeability”; Chapter 5 “Designation and Marking”; and Chapter 6 “Measurement”; --- Modify the original Chapter 1 “Model, Dimension and Allowable Deviation”; add Chapter 7 “Recommended Dimension”; --- Modify the schematic diagram; combine the original Table 1~6 into Table 1 and 2; only remain the basic dimension; modify the normative tolerance into recommended tolerance; cancel the dimension specification of the Second Recommended Model SPUN150408; --- Modify the normative “Appendix A” into informative “Appendix B”; add new “Appendix A”, “Appendix C”, and “Appendix D”; --- Add the “Bibliography”. This Standard’s translation equivalently adopts ISO 883L.2013 Indexable Hardmetal (Carbide) Inserts with Rounded Corners, without Fixing Hole; Dimensions (English Edition). Chinese documents that have consistent relationship with the international documents in the normative references of this Standard are as follows. --- GB/T 2075-2007 Classification and Application of Hard Cutting Materials for M Metal Removal with Defined Cutting Edges - Designation of The Main Groups and Groups of Application (ISO 513.2004,IDT) --- GB/T 2076-2007 Indexable Inserts for Cutting Tools – Designation (ISO 1832.2004,MOD) This Standard was proposed by China Non-Ferrous Metal Industry Association. Indexable Hardmetal (Carbide) Inserts with Rounded Corners, without Fixing Hole – Dimensions1 ScopeThis Standard specifies the dimensions of indexable hardmetal (carbide) inserts with rounded corners, without fixing hole. This Standard is applicable to the indexable hardmetal (carbide) inserts with rounded corners, without fixing hole.2 Normative ReferencesThe following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this document. ISO 513 Classification and Application of hard Cutting Materials for Metal Removal with Defined Cutting Edges – Designation of the Main Groups and Groups of Application ISO 1832 Indexable Inserts for Cutting Tools – Designation3 Types of InsertThe types of indexable hardmetal (carbide) inserts specified in this Standard are the following. — TN. triangular inserts, with 0° normal clearance; — TP. triangular inserts, with 11° normal clearance; — SN. square inserts, with 0° normal clearance; — SP. square inserts, with 11° normal clearance. Inserts with 0° normal clearance (TN and SN) are standardized only without chip breakers. Inserts with 11° normal clearance (TP and SP) are provided with and ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 2079-2015 be delivered?Answer: The full copy PDF of English version of GB/T 2079-2015 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 2079-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2079-2015_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 2079-2015 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 2079-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2079-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 2079-2015?A step-by-step guide to download PDF of GB/T 2079-2015_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 2079-2015". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
