GB/T 20123-2006 PDF EnglishUS$85.00 · In stock · Download in 9 seconds
GB/T 20123-2006: Steel and iron -- Determination of total carbon and sulfur content Infrared absorption method after combustion in an induction furnace (routine method) Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 20123-2006: Steel and iron -- Determination of total carbon and sulfur content Infrared absorption method after combustion in an induction furnace (routine method)---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT20123-2006 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.080.01 H 11 GB/T 20123-2006 / ISO 15350.2000 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) (ISO 15350.2000, IDT) Issued on. MARCH 2, 2006 Implemented on. SEPTEMBER 1, 2006 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration Committee. Table of ContentsForeword... 3 1 Scope... 4 2 Normative references... 4 3 Principle... 5 4 Reagents... 5 5 Apparatus... 6 6 Test method... 7 7 Sampling... 9 8 Procedure... 9 9 Expression of results... 16 10 Test report... 18 Annex A (Informative) Examples of diagram for analytical principles... 20 Annex B (Informative) Examples calculation of a linearity check... 24 Test. Carbon over the mass fraction range 0.005% to 0.12%... 24 Annex C (Informative) Additional information on international cooperative tests ... 26 Annex D (Informative) Graphical representation of precision data... 30ForewordThis Standard identically uses ISO 15350.2000. For easy use, this Standard made the following editorial modifications. a) modified “this International Standard” to “this Standard”; b) used decimal point “.” to replace “,” used as decimal point in ISO 15350.2000; c) deleted the foreword of ISO 15350.2000; d) moved the position of Table 6 in ISO 15350.2000 below 9.2.2 in this Standard. Annex A, Annex B, Annex C and Annex D of this Standard are informative. This Standard was proposed by China Iron and Steel Industry Association. This Standard shall be under the jurisdiction of National Technical Committee on Steel of Standardization Administration of China. Main drafting organization of this Standard. Iron and Steel Research Institute Main drafter of this Standard. Yang Guorong. Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method)1 ScopeThis Standard specifies an infrared absorption method, after combustion in an induction furnace, for the determination of the total carbon and sulfur content in steel and iron.2 Normative referencesThe following normative documents contain provisions which, through reference in this text, constitute provisions of this Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below.3 PrincipleThe sulfur is converted to sulfur dioxide by combustion in a stream of oxygen. Measurement is by infrared absorption of the sulfur dioxide carried by a current of oxygen.4 ReagentsAn oxidation catalyst [copper(II) oxide or platinum] tube heated to 600 C followed by suitable carbon dioxide and water absorbents shall be used when the presence of organic contaminants is suspected in the oxygen.5 ApparatusOrdinary laboratory equipment plus the following shall be used.6 Test methodThis test method is written for use with commercial analysers, equipped to carry out the included operations automatically and calibrated using steels and irons of known carbon and sulfur contents. During specimen combustion, the flow of CO2 with its oxygen gas carrier is routed through the measuring chamber (see 5.1) while oxygen alone passes through the reference chamber.7 SamplingCarry out sampling in accordance with ISO 14284 or appropriate national standards for iron and steel.8 ProcedureAssemble the apparatus and prepare it for operation according to the manufacturer's instructions. Test the furnace and analyser to ensure the absence of leaks. Make a minimum of five determinations using a specimen with measurable concentrations of carbon and sulfur and accelerator as directed in 8.3 before attempting to calibrate the system or determine the blank.9 Expression of resultsA planned trial of this method was carried out by 31 laboratories, at 20 levels of carbon, each laboratory making three determinations of carbon content at each level. The data obtained showed a logarithmic relationship between sulfur content and repeatability (r) and reproducibility (R and Rw) of the test results (see note 3 of 8.2.1) as summarized in Table 6.The graphical representation of the figures is given in annex D.10 Test reportThe test report shall include the following information.Annex A(Informative) Examples of diagram for analytical principlesAnnex B(Informative) Examples calculation of a linearity check Test. Carbon over the mass fraction range 0.005% to 0.12% Reference materials.Annex C(Informative) Additional information on international cooperative tests Tables 5 and 6 were derived from the results of international analytical trials carried out in 1995 on 20 steel samples in 13 countries involving 31 laboratories. The results of the trials were reported in document ISO/TC 17/SC 1 N 1177, revised in 1998.Annex D(Informative) Graphical representation of precision data ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 20123-2006 be delivered?Answer: The full copy PDF of English version of GB/T 20123-2006 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 20123-2006_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 20123-2006_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 20123-2006 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 20123-2006?A step-by-step guide to download PDF of GB/T 20123-2006_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 20123-2006". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
