GB/T 17919-2008 PDF EnglishUS$70.00 · In stock · Download in 9 seconds
GB/T 17919-2008: Directives for dust explosion protection for dust collectors in dust explosion hazardous area Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 17919: Historical versions
GB/T 17919-2008: Directives for dust explosion protection for dust collectors in dust explosion hazardous area---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT17919-2008 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 13.230 C 67 Replacing GB/T 17919-1999 Directives for dust explosion protection for dust collectors in dust explosion hazardous area Issued on: DECEMBER 15, 2008 Implemented on: OCTOBER 1, 2009 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration Committee. Table of ContentsForeword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Terms and definitions ... 4 4 Design ... 5 5 Installation ... 8 6 Use and maintenance ... 8ForewordThis standard replaces GB/T 17919-1999 “Directives for dust explosion protection for dust collectors in dust explosion hazardous area”. Compared with GB/T 17919-1999, this standard has made the following changes. --- Replace the abolished quoted standard; --- Modify some related technical parameters (see 4.1.6). This standard was proposed by State Administration of Work Safety. This standard shall be under the jurisdiction of National Safety Standardization Technical Committee Dust Explosion-proof Sub-Technical Committee (SAC/TC 288/SC 5). The drafting organizations of this standard. SinoSteel Wuhan Institute of Safety and Environmental Protection, SinoSteel TianCheng Environmental Technology Co., Ltd., China Metallurgy Equipment Nanjing Co., Ltd. The main drafters of this standard. Wang Zhi, Chen Longshu, Zhao Danli, Hu Dongtao, Zhu Bingan, Chen Qiang. This standard was first released in November 1999, and this is the first revision. Directives for dust explosion protection for dust collectors in dust explosion hazardous area1 ScopeThis standard specifies the requirements for dust explosion protection for dust collectors in dust explosion hazardous area. This standard applies to design, installation, use and maintenance of dust collectors in dust explosion hazardous area. This standard does not apply to mine-underground, fireworks and crackers, and civil explosive equipment’s production sites.2 Normative referencesThe provisions of the following documents become the terms of the standard through reference in this standard. For dated references, all the subsequent amendments (excluding corrigendum) or revisions do not apply to this standard. However, encourage the parties who reach an agreement in accordance with this standard to study whether to use the latest version of these documents. For undated references, the latest version applies to this standard. GB 12476.1 Electrical apparatus for use in the presence of combustible dust - Part 1-1. Electrical apparatus protected by enclosures and surface temperature limited (idt GB 12476.1-2000, IEC 61241-1.1999) GB 15577 Safety regulations for dust explosion prevention and protection GB/T 15604 Terminology for dust explosion prevention GB/T 15605 Guide for pressure venting of dust explosions3 Terms and definitionsThe terms established in GB/T 15604 AND the following terms and definitions apply to this standard. 3.1 Dust explosion hazardous area 4.5.2 Dust collector shall have antistatic direct-grounding facilities, and grounding resistance shall not exceed 100Ω. 4.5.3 The connection between dust collector and inlet-outlet ducts and ash-unloading device shall be welded. If the flange is used, use conductor to cross over, and its resistance shall not exceed 0.03Ω. 4.5.4 The matched electrical equipment shall comply with the provisions of GB 12476.1. 4.6 Ash-unloading device 4.6.1 Ash-bucket’s in-wall shall be smooth, the included-angle between the wall surface of cutting and the horizontal plane shall be determined according to the repose-angle of dust, generally not less than 65°. 4.6.2 The angle between rectangular ash-bucket’s walls shall be treated with arc measures. 4.6.3 The lower part of ash-bucket shall install lock-air ash-unloading device. 4.6.4 Ash-unloading device shall be synchronized with dust collector operation, so that dust cannot be stored up in ash-bucket. 4.7 Automatic control and monitoring 4.7.1 It shall carry out dust cleaning process control for dust collectors. 4.7.2 The following parameters of dust collectors shall be monitored. --- Pressure difference between air inlet and air outlet; --- Temperature of air inlet-outlet and ash-bucket; --- Dust cleaning parameters (cleaning cycle, cleaning intervals, etc.); --- Injection pressure of pulse-jet bag filter. 4.7.3 The operating condition of the following components of dust collectors shall be monitored. --- Ash-unloading device; --- Valve for dust cleaning (stop valve, switching valve, etc.). 4.7.4 It shall give an alarm when dust collectors have the following malfunction. --- The pressure difference between air inlet and air outlet is too high; ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 17919-2008 be delivered?Answer: The full copy PDF of English version of GB/T 17919-2008 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 17919-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17919-2008_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 17919-2008 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 17919-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17919-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 17919-2008?A step-by-step guide to download PDF of GB/T 17919-2008_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 17919-2008". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
