GB/T 17656-2018 PDF EnglishUS$230.00 · In stock · Download in 9 seconds
GB/T 17656-2018: Plywood for concrete form Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 17656: Historical versions
Similar standardsGB/T 17656-2018: Plywood for concrete form---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT17656-2018NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 79.060.10 B 70 Replace GB/T 17656-2008 Plywood for concrete form Issued on. MAY 14, 2018 Implemented on. DECEMBER 1, 2018 Issued by. State Administration for Market Regulation; Standardization Administration of PRC. Table of ContentsForeword... 3 1 Scope... 5 2 Normative references... 5 3 Terms and Definitions... 5 4 Categories... 6 5 Requirements... 6 6 Measurement and inspection methods... 13 7 Inspection rules... 18 8 Marking, packaging, transportation and storage... 20 Appendix A (Normative) Correction factors for bending performance of plywood for concrete form under service conditions... 211 ScopeThis standard specifies the terms and definitions, classification, requirements, measurement and inspection methods, inspection rules and marks, packaging, transportation, and storage of plywood for concrete form. This standard applies to plywood for concrete form made of wood veneer.2 Normative referencesThe following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) is applicable to this standard. GB/T 9846-2015 Plywood for general use GB/T 17657-2013 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels GB/T 18259 Terminology for wood-based panels and their surface decoration GB/T 19367 Wood-based panels -- Determination of dimensions of panels3 Terms and DefinitionsThe terms and definitions defined in GB/T 18259 and the following apply to this document. 3.1 Plywood for concrete form The plywood that can pass the boiling test and be used as concrete forming molds.4 CategoriesAccording to the surface treatment, plywood is divided into.5 Requirements5.1 Wood species 5.1.1 The wood species of plywood used for concrete form can be masson pine, Yunnan pine, larch, radiata pine, poplar, eucalyptus, birch, Schima superba, sweetgum, Alniphyllum fortunei, Lauan, Okoume, Apitong, etc. 5.2 Structure of the plywood 5.2.1 The wood grains of two adjacent layers of veneer shall be perpendicular to each other. The veneers of the symmetrical layers at both sides of the central layer shall be of the same wood species or wood species with similar physical properties, and the thicknesses shall be the same. 5.3 Adhesives 5.3.1 The adhesive of plywood for concrete form shall be phenolic resin or resin with equivalent performance. 5.3.2 The resin used for surface treatment shall be phenolic resin or resin with equivalent performance. 5.3.3 The resin used for coating shall be phenolic resin or resin with equivalent performance. 5.4 Specifications and deviations 5.4.3 Verticality The verticality of plywood for concrete form shall not exceed 0.8 mm/m. 5.4.4 Edge straightness The edge straightness of plywood for concrete form shall not exceed 1 mm/m. 5.4.5 Flatness The flatness of plywood for concrete form shall not exceed 20 mm. 5.5 Appearance quality 5.5.3 The adhesive-coated board is divided into two grades according to the visible processing defects on the finished board. first-class products and second-class products; the permissible defects shall meet the requirements in Table 4. 5.5.5 The surface of the board shall be sanded or scraped, and it can be sanded (scraped) on one side or not sanded (scraped) as agreed upon by both the supplier and the buyer. 5.5.6 There is no limit to the number of surface splicing veneers of plywood used for concrete form, but the splicing shall comply with the provisions for splicing of surface veneers in Table 3.Similar textures are required for the splicing. 5.5.7 The adhesive-coated board shall be coated with resin on both sides. If the grades of the two sides are different, they shall be clearly marked. 5.5.8 The film-coated board shall be coated on both sides. If the grades of the two sides are different, they shall be clearly marked. 5.6 Physical and mechanical properties 5.6.1 The physical and mechanical properties of plywood for concrete form shall meet the requirements of Table 6.6 Measurement and inspection methods6.1 Specification and dimension measurement 6.1.1 Measuring tools The measuring tools include. 6.1.2 Measurement of length, width and thickness of boards Carry out according to the relevant regulations in GB/T 19367. 6.1.3 Squareness measurement Carry out according to the relevant regulations in GB/T 19367. 6.2 Sampling and size specification of specimens 6.2.1 Instruments and measuring tools The instruments and measuring tools include. 6.2.2 Sawing of specimens 6.3 Inspection method 6.3.1 Appearance quality 6.3.1.1 Measure the appearance defects of plywood by visual inspection or with a steel ruler (the accuracy shall be 0.1 mm). 6.3.1.6 Determination of results. Check the plywood for concrete form one by one, inspect the appearance defects, and then determine whether the plywood is qualified or not. 6.3.2 Moisture content The moisture content inspection shall be carried out according to the provisions of 4.3 in GB/T 17657-2013.7 Inspection rules7.1 Inspection classification 7.1.1 Product inspection is divided into factory inspection and type test. 7.1.2 The factory inspection includes the following items. 7.1.3 Type test includes appearance quality inspection (5.5), specification and dimension inspection (5.4) and inspection of all physical and mechanical properties (see Table 6). Type test shall be carried out when one of the following situations happens. 7.2 Sampling inspection 7.2.1 Appearance quality inspection Appearance quality sampling inspection shall be carried out in accordance with the provisions of 7.2.1 in GB/T 9846-2015. 7.3 Judgment Rules 7.3.1 Judgment rules for appearance quality and size When the appearance quality, size and deviation meet the requirements of 5.4, 5.5, 7.2.1 and 7.2.2, the appearance quality and specifications of the batch of samples shall be judged as qualified; otherwise, it shall be downgraded or judged as unqualified. 7.3.2 Rules for determining physical and mechanical properties 7.3.2.3 If the arithmetic means of the static bending strength and elasticity modulus of each plywood meet the requirements of the index value, and the minimum value is not less than 80% of the index value, then the static bending strength and elasticity modulus are qualified; otherwise, re-inspection shall be carried out. 7.4 Comprehensive judgment When the appearance quality, specification and deviation, and physical and mechanical properties of the samples all meet the requirements of the corresponding grade, the batch of products is judged as qualified. Otherwise, the batch shall be downgraded or judged as unqualified. 7.5 Measurement of products Finished products are measured and calculated in cubic meters, and their allowable tolerances shall not be included. When measuring a single board, the result can be accurate to 0.00001 m3; when calculating a batch of boards, the result can be accurate to 0.001 m3.8 Marking, packaging, transportation and storage8.1 Logo At the lower right corner of the back veneer of each board, or the side, stamp the signs to indicate the product name, grade, and to remind users of the direction of the board (longitudinal and transverse). 8.2 Packaging Products shall be properly packaged according to different types and specifications. Each package shall be accompanied by an inspection label indicating the product name, wood species and thickness of the surface veneer, category, grade, manufacturer’s name, trademark, size, quantity, product standard number, etc. 8.3 Transportation and storage The product shall be protected from moisture, rain, the sun and deformation during transportation and storage. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 17656-2018 be delivered?Answer: The full copy PDF of English version of GB/T 17656-2018 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 17656-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17656-2018_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 17656-2018 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 17656-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17656-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 17656-2018?A step-by-step guide to download PDF of GB/T 17656-2018_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 17656-2018". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
