Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 16935.3-2016 PDF English

US$145.00 · In stock · Download in 9 seconds
GB/T 16935.3-2016: Insulation coordination for equipment within low-voltage systems -- Part 3: Use of coating, potting or moulding for protection against pollution
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

GB/T 16935.3: Historical versions

Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 16935.3-2016145 Add to Cart Auto, 9 seconds. Insulation coordination for equipment within low-voltage systems -- Part 3: Use of coating, potting or moulding for protection against pollution Valid
GB/T 16935.3-2005799 Add to Cart 3 days Insulation coordination for equipment within low-voltage systems -- Part 3: Use of coating, potting or moulding for protection against pollution Obsolete

Similar standards

GB/T 16935.1   GB/Z 16935.2   GB/T 16935.4   GB/T 11918.6   

GB/T 16935.3-2016: Insulation coordination for equipment within low-voltage systems -- Part 3: Use of coating, potting or moulding for protection against pollution


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT16935.3-2016
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 29.120 K 30 GB/T 16935.3-2016 / IEC 60664-3.2010 Replacing GB/T 16935.3-2005 Insulation coordination for equipment within low-voltage systems - Part 3.Use of coating, potting or moulding for protection against pollution (IEC 60664-3.2010, IDT) Issued on. APRIL 25, 2016 Implemented on. NOVEMBER 01, 2016 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China; Standardization Administration of the People’s Republic of China.

Table of Contents

Foreword... 3 Introduction... 5 1 Scope... 6 2 Normative references... 6 3 Definitions... 7 4 Design requirements... 9 5 Tests... 11 Annex A (normative) Test sequence... 19 Annex B (normative) Technical committees’ decisions... 21 Annex C (normative) Printed wiring board for testing coatings... 22 Bibliography... 26

Foreword

GB/T 16935 “Insulation coordination for equipment within low-voltage systems” is expected to consist of the following parts. - Part 1.Principles, requirements and tests; - Part 2-1.Application guide. Explanation of the application of the GB/T 16935 series, dimensioning examples and dielectric testing; - Part 2-2.Interface considerations - Application guide; - Part 3.Use of coating, potting or moulding for protection against pollution; - Part 4.Consideration of high-frequency voltage stress; - Part 5.Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm. This Part is Part 3 of GB/T 16935. This Part is drafted in accordance with the rules given GB/T 1.1-2009. This Part replaces GB/T 16935.3-2005 “Insulation coordination for equipment within low-voltage systems - Part 3.Use of coating, potting or moulding for protection against pollution”. Compared with GB/T 16935.3-2005, main technical differences are as follows. - In 4.4 "Dimensioning procedures", it is clearly state that the specified values of minimum spacing of type 2 protection may also be applied to functional insulation; - In 5.5 “Scratch resistance test”, modify the content of the first paragraph and add a note, and detail the description for the specific parts of scratch resistance test; - REPLACE 5.6 “Visual examination”, 5.8.3 “Insulation resistance between conductors”, 5.8.4 “AC withstand voltage test”, 5.9.1 “Resistance to soldering heat”, 5.9.2 “Flammability” and the reference standard IEC 60326-2 “Printed boards; Part 2.test methods” in Annex A WITH IEC 61189-3 “Test methods for electrical materials, printed boards and other interconnection structures and assemblies. Part 3.Test methods for interconnection structures (printed boards)”, and UPDATE the test basis and method; - In 5.9.3 “Solvent resistance” and Annex A, modify the solvent resistance requirement from “According to 8.5 in IEC 60326-2, use methylene chloride" to “Solvent as agreed between purchaser and supplier”. This Part uses the translation method to identically adopt IEC 60664-3.2010 (2.1 edition) “Insulation coordination for equipment within low-voltage systems - Part 3.Use of coating, potting or moulding for protection against pollution”. This Part shall be used together with GB/T 16935.1-2008 “Insulation coordination for equipment within low-voltage systems - Part 1.Principles, requirements and tests” (IEC 60664-1.2007, IDT). China’s national document that correspond in a consistent manner to the International document normatively referenced in this Part is as follows. - GB/T 4677-2002 Test methods of printed boards (eqv IEC 60326-2.1990). This Part has made the following editorial modification. - “93” in 5.7.4.1 and 5.8.1 is wrong, which is modified to “93 % ± 3 %”. This Part is proposed by China Electrical Equipment Industry Association. This Part is under the jurisdiction of National Technical Committee on Low Voltage Equipment Insulation Coordination of Standardization Administration of China (SAC/TC 417). Responsible drafting organization of this Part. Shanghai Electric Apparatus Research Institute. Participating drafting organizations of this Part. Delixi Electric Co., Ltd., Changshu Switch Manufacturing Co., Ltd. (formerly Changshu Switch Factory). Main drafters of this Part. Huang Jingye, Bao Ge, Wu Qingyun, Zhang Lili, Lin Chuan, Zhou Jianxing. The historical edition of the standard replaced by this Part is. - GB/T 16935.3-2005.

1 Scope

This Part of GB/T 16935 applies to assemblies protected against pollution by the use of coating, potting or moulding, thus allowing a reduction of clearance and creepage distances as described in Part 1 or Part 5.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 2423.1-2008 Environmental testing - Part 2.Test methods - Tests A. Cold (IEC 60068-2-1.2007, IDT)

3 Definitions

For the purposes of this document, the definitions given in GB/T 16935.1-2008 as well as the following definitions apply. Any kind of measure which reduces the influence of the environment.

4 Design requirements

For type 1 protection, the dimensioning requirements of 5.1 and 5.2 of Part 1 or Part 5 apply. For type 2 protection, the spacing between the conductors before the protection is applied shall not be less than the values as specified in Table 1.T 5.1 General The suitability of protection is evaluated by carrying out all the tests described in 5.8 after the conditioning described in 5.7. Printed boards shall be cleaned and coated using the normal procedure of the manufacturer. The soldering procedure is carried out but without components being in place. Moulded and potted specimens shall be tested without further preparation.

Annex A

(normative) Test sequence The following flow-chart shows the order in which the tests of Clause 5 have to be carried out. No failure of any specimen under test is permitted.

Annex B

(normative) Technical committees’ decisions When referring to the standard, technical committees are required to decide on the severity levels for some of the tests and are allowed to vary some of the test conditions. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 16935.3-2016 be delivered?Answer: The full copy PDF of English version of GB/T 16935.3-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 16935.3-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 16935.3-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 16935.3-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version GB/T 16935.3-2016?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16935.3-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of GB/T 16935.3-2016?

A step-by-step guide to download PDF of GB/T 16935.3-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 16935.3-2016".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9