GB/T 15425-2014 PDF EnglishUS$315.00 · In stock · Download in 9 seconds
GB/T 15425-2014: Bar code for commodity - 128 bar code Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 15425: Historical versions
Similar standardsGB/T 15425-2014: Bar code for commodity - 128 bar code---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT15425-2014GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 35.040 A 24 Replacing GB/T 15425-2002 Bar code for commodity - 128 bar code Issued on. SEPTEMBER 03, 2014 Implemented on. FEBRUARY 01, 2015 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of the People’s Republic of China. Table of ContentsForeword... 3 1 Scope... 4 2 Normative references... 4 3 Terms and definitions... 5 4 Requirements... 5 4.1 Symbol structure... 5 4.2 GS1-128 code character set... 6 4.3 Size requirements... 13 4.4 Algorithm of the reference decode... 13 4.5 Symbol quality... 16 5 Application parameters of GS1-128 code... 18 5.1 Symbol height... 18 5.2 Symbol length... 18 5.3 Human-recognizable characters... 19 5.4 Symbol grade requirements... 19 5.5 Transmission data (FNC1)... 20 6 GS1-128 code character string encoding/decoding rules... 20 6.1 Basic structure of GS1-128 code that uses the application identifier and the link... 20 6.2 Link... 21 6.3 Separating character (FNC1)... 23 6.4 Mixed use of ITF-14 and GS1-128 code and other symbologies... 24 6.5 Symbol position... 24 Appendix A (Informative) GS1-128 code symbol length minimum character set selection and application examples... 25 Appendix B (Informative) Relationship between bar code character value and ASCII value... 28 Appendix C (Normative) Calculation method of GS1-128 code symbol check character value... 29 Appendix D (Informative) GS1-128 code symbol processing - basic logic... 30ForewordThis Standard was drafted in accordance with the rules given in GB/T 1.1-2009. The code 128 which is specified in this Standard is an application subset of GB/T 18347 "Code 128". This Standard replaces GB/T 15425-2002, “UCC/EAN - 128 bar code”; compared with GB/T 15425-2002, the major technical changes are as follows. -- Change the standard name to “Bar code for commodity - 128 bar code”; -- Modify the name of the standardization organization in the Standard accordingly because the international organization EAN·UCC was renamed GS1; -- Add an application example of the minimum symbol length rule in the informative Appendix A; -- Make editorial changes according to the new version of "GS1 Specification (V10)". This Standard is revised by referring to "Linear Bar Code -- GS1-128 Code Specification”, Section 4 of Chapter 5 of "GS1 Specification (V10)" which is formulated by GS1, and according to the practical situation of our country. This Standard shall be under the jurisdiction of National Technical Committee 267 on Logistics Information Management of Standardization Administration of China (SAC/TC 267). The drafting organizations of this Standard. GS1 China, Zhejiang Article Code Center, Shaanxi Institute of Standardization, Ningbo Institute of Standardization, Hunan Institute of Standardization, Henan Institute of Standardization, Beijing Wuzi University. The drafters of this Standard. Zhang Nan, Ding Wei, Liu Lizhen, Du Jingrong, Zhang Peiying, Zhou Qin, Lou Qinghua, Li Chang, Gong He, Wang Chenglin. The previous versions of the standards which are replaced by this Standard are. -- GB/T 15425-1994, GB/T 15425-2002. Bar code for commodity - 128 bar code1 ScopeThis Standard specifies contents such as the structure, bar code character set, bar code symbol dimension, quality assurance of GS1 system code 128 (hereinafter referred to as GS1-128 code), and the application parameters, character string encoding and decoding rules of GS1-128 code.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document. GB/T 1988, Information technology - 7-bit Coded character set for information interchange3 Terms and definitionsTerms and definitions determined by GB 12904 and GB/T 12905 are applicable to this document.4 RequirementsThe composition of the GS1-128 code symbol, from left to right, is shown as follows. The function character is used to indicate allowed special operations or applications to the bar code scanner, among which.5 Application parameters of GS1-128 codeThe length of the GS1-128 code symbol depends on the number of encoded characters. Evaluate the symbol quality in the form of symbol grade; the definition of its parameters shall be in accordance with the provisions of GB/T 18348.6 GS1-128 code character string encoding/decoding rulesFor the link of variable-length character string (referring to the case where the first 2 bits of all application identifiers are not included in Table 4), data separating characters are required. The preferred position of the GS1-128 code (additional bar code) that represents additional information shall be on the same horizontal line as the independent bar code (main bar code) that contains GTIN, SSCC or other GS1 codes; the additional bar code shall be as close to the main bar code as possible under the prefix of a clear area that does not affect the main bar code.Appendix A(Informative) GS1-128 code symbol length minimum character set selection and application examples In the GS1-128 code symbol (or other code 128), the same data can be expressed differently by using different combinations of start, switch and escape characters.Appendix B(Informative) Relationship between bar code character value and ASCII value The transition relation between bar code character value (S) and ASCII value is as follows.Appendix C(Normative) Calculation method of GS1-128 code symbol check character value GS1-128 code symbol check character is calculated according to the following method. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 15425-2014 be delivered?Answer: The full copy PDF of English version of GB/T 15425-2014 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 15425-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15425-2014_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 15425-2014 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 15425-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15425-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 15425-2014?A step-by-step guide to download PDF of GB/T 15425-2014_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 15425-2014". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
