GB/T 15089-2001 PDF EnglishUS$70.00 · In stock · Download in 9 seconds
GB/T 15089-2001: Classification of power-driven vehicles and trailers Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 15089: Historical versions
Similar standardsGB/T 15089-2001: Classification of power-driven vehicles and trailers---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT15089-2001GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 43.020 T 04 Replacing GB 15089-1994 Classification of Power-driven Vehicles and Trailers Issued on. JULY 3, 2001 Implemented on. MARCH 1, 2002 Issued by. General Administration of Quality Supervision, Inspection and Quarantine (AQSIQ) of the People's Republic of China Table of ContentsForeword... 3 1 Scope... 4 2 Normative References... 4 3 Classification... 4ForewordThis Standard equivalently adopts the Appendix 7 "Classification of Power-driven Vehicles and Trailers" of the revised version 1 of ECE R.E.3 issued in November, 1997, and the Amendment 2 of its revised version 1; it is the revision of GB/T 15089-1994 "Classification of Power-driven Vehicles". The technical contents of this Standard are consistent with those of ECER.E.3.The differences between this Standard and the preceding edition are as follows. 1.The title of the standard was revised to "Classification of Power-driven Vehicles and Trailers", according to Appendix 7 in ECE R.E.3; 2.Category M1 in this Standard was not subdivided into M1(a) and M1(b); 3.Categories M2 and M3 were subdivided into Class A, Class B, Class I, Class II and Class III respectively; 4.The literal expression for Category L vehicles was modified; and the maximum design speed of Category L was revised from 40 km/h to 50 km/h; 5.Some terms and definitions of vehicles were referred to GB/T 3730.1-2001; 6.The contents of Category G vehicles were added; 7.Chapter 2 "Normative References" was added. This Standard replaces GB/T 15089-1994, from the implementation date. This Standard was proposed by State Bureau of Machine Building Industry. This Standard shall be under the jurisdiction of National Technical Committee of Auto Standardization. Drafting organization of this Standard. China Automotive Technology & Research Center. Chief drafting staffs of this Standard. Liu Yanrong, Wu Wei and Zhao Jingwei. This Standard was issued in May, 1994 for the first time. Classification of Power-driven Vehicles and Trailers1 ScopeThis Standard is the classification of power-driven vehicles and trailers; the power-driven vehicles and trailers are classified into Category L, Category M, Category N, Category O and Category G in this Standard. This Standard is applicable to the automobiles, trailers and motorcycles used on the road.2 Normative ReferencesThe following normative documents contain provisions which, through reference in this Standard, constitute provisions of this Standard. At the time of publication, the editions indicated were valid. All standards will be revised; the parties who enter into an agreement according to this Standard are encouraged to study whether the latest edition of the following standard is applicable. GB/T 3730.1-2001 Motor Vehicles and Trailers - Types - Terms and Definitions3 Classification3.1 Category L Power-driven vehicles with two-wheels or three-wheels. 3.1.1 Category L1 A two-wheeled vehicle – if a thermic engine is used, its engine cylinder capacity does not exceed 50 mL; and whatever the means of propulsion, the maximum design speed does not exceed 50km/h. 3.2 Category M Power-driven vehicles having at least four-wheels and used for the carriage of passengers. 3.2.1 Category M1 Vehicles used for the carriage of passengers and comprising not more than eight seats in addition to the driver's seat. Note. For a multi-purpose passenger vehicle (see 2.1.1.8 of GB/T 3730.1-2001 for the definition) in Category M1, if it simultaneously has two conditions of its definition, it will not be Category M1 but Category N1, N2 or N3 according to its mass. 3.3 Category N Power-driven vehicles having at least four-wheels and used for the carriage of goods. 3.4 Category O Trailers (including semitrailers). 3.4.1 Category O1 Trailers with a maximum design total mass not exceeding 750 kg. 3.4.2 Category O2 Trailers with a maximum design total mass exceeding 750 kg, but not exceeding 3,500 kg. 3.4.3 Category O3 Trailers with a maximum design total mass exceeding 3,500 kg, but not exceeding 10,000 kg. 3.4.4 Category O4 Trailers with maximum design total mass exceeding 10,000 kg. 3.4.5 Trailers of Categories O2, O3 and O4 are of one of those specified in 2.2 of GB/T 3730.1-2001. 3.4.6 Remark In the case of a semitrailer or center-axle trailer (see 2.2.2 and 2.2.3 in GB/T 3730.1-2001), the mass to be considered, for classifying the trailer, corresponds to the static vertical load that is transmitted to the ground by all axles, under the condition that the semitrailer or center-axle trailer carries its maximum load and is coupled to the towing vehicle. 3.5 Category G It refers to the off-road vehicles of Categories M and N that satisfies the requirements of this paragraph, according to the testing conditions in 3.5.4 and the definitions and sketches in 3.5.5. 3.5.1 It refers to the vehicles in Category N1 with a maximum design total mass not exceeding 2,000 kg; vehicles in Category M1 are deemed to be the vehicles in Category G if they have. 3.5.2 Vehicles in Category N1 with a maximum design total mass exceeding 2,000 kg, or in Categories N2 and M2, or in M3 with a maximum design total mass not exceeding 12,000 kg are deemed to be vehicles in Category G, either if all their wheels are designed to be driven simultaneously (including vehicles where the drive to one axle can be disengaged) or if the following three requirements are satisfied. 3.5.3 Vehicles in Category M3 with a maximum design total mass exceeding 12,000 kg or in Category N3 are deemed to be vehicles in Category G, either if the wheels are designed to be driven simultaneously (including vehicles where the drive to one axle can be disengaged) or if the following requirements are satisfied. At least half the wheels are driven; 3.5.4 Load and test conditions 3.5.4.1 Vehicles in Category N1 with a maximum design total mass not exceeding 2,000 kg and vehicles in Category M1 must be in running order, namely, with coolant fluid, lubricants, fuel, tools, spare-wheel and a driver. 3.5.4.2 Vehicles other than those referred to in paragraph 3.5.4.1, must be loaded to the maximum design total mass. 3.5.4.4 When measuring front and rear incidence angles and ramp angles, no account is taken of underrun protective devices. 3.5.5 Definitions and sketches of front and rear incidence angles, ramp angle and ground clearance 3.5.5.1 Front incidence angle It refers to the maximum angle between the ground plane and planes tangential to the tires of the front wheel, under a static load, such that no point of the vehicle ahead of the front axle is situated below these planes and no rigid part of the vehicle, with the exception of any steps, is situated below these planes, see Figure 1. Figure 1 3.5.5.2 Rear incidence angle It refers to the maximum angle between the ground plane and planes tangential to the tires of the rear wheels, under a static load, such that no point of the vehicle behind the rearmost axle is below these planes and no rigid part of the vehicle is situated below these planes, see Figure 2. Figure 2 3.5.5.3 Ramp angle It refers to the minimum acute angle between two planes, perpendicular to the medium longitudinal plane of vehicle, tangential to the tires of the front wheels and to the tires of the rear wheels respectively, under a static load, the intersection of which touches the rigid underside of vehicle apart from the wheels. This angle defines the steepest ramp over which the vehicle can pass, see Figure 3. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 15089-2001 be delivered?Answer: The full copy PDF of English version of GB/T 15089-2001 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 15089-2001_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15089-2001_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 15089-2001 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 15089-2001?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15089-2001 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 15089-2001?A step-by-step guide to download PDF of GB/T 15089-2001_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 15089-2001". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
