GB/T 14989-2015 PDF EnglishUS$90.00 · In stock · Download in 9 seconds
GB/T 14989-2015: Iron-cobalt-vanadium permanent-magnet alloys Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 14989: Historical versions
Similar standardsGB/T 14989-2015: Iron-cobalt-vanadium permanent-magnet alloys---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT14989-2015GB NATIONAL STANDARD ICS 77.140.40 H 58 Replacing GB/T 14989-1994 Iron-cobalt-vanadium permanent-magnet alloys Issued on: DECEMBER 10, 2015 Implemented on: NOVEMBER 01, 2016 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of the People's Republic of China. Table of ContentsForeword... 3 1 Scope... 4 2 Normative references... 4 3 Order content... 5 4 Size and shape... 6 5 Technical requirements... 7 6 Test method... 8 7 Inspection rules... 8 8 Packaging, marking and quality certificate... 9 Appendix A (Informative) Recommended heat treatment system for alloy samples... 10 Appendix B (Normative) Preparation and testing of magnetic measurement samples... 11ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 14989-1994 “Iron-cobalt-vanadium permanent-magnet alloys”. As compared with GB/T 14989-1994, the main changes of this standard are as follows. - ADD the “normative references” (SEE Chapter 2); - ADD the “order content” (SEE Chapter 3); - EXTEND the diameter range of the cold drawn wire; MAKE appropriate adjustment of the allowable diameter deviations (SEE 4.1.1; 1.1.1 of 1994 version); - CHANGE the thickness deviation of the cold rolled strips from negative deviation to positive and negative deviations (SEE 4.1.2; 1.1.2 of 1994); - CHANGE the smelting method from “non-vacuum induction” to “vacuum induction” (SEE 5.2; 2.2 of 1994 version); - DELECT the “marking example” (SEE 1.3 of 1994 version); - UNIFY the magnetic performance indicators into the international unit system (SEE 5.4; 2.4 of 1994 version). This standard was proposed by China Iron and Steel Industry Association. This standard shall be under the jurisdiction of the National Steel Standardization Technical Committee (SAC/TC 183). The drafting organizations of this standard. Iron and Steel Research Institute, Metallurgical Industry Information Standards Institute. The main drafters of this standard. Yu Yipeng, Zhang Jinglin, Wu Bin, Lu Fengshuang, Zhang Jiansheng, Zhang Jianfu, Yan Chengming. This Standard replaces the standard previously issued as follows. - GBn 174-1982; - GB/T 14989-1994. GB/T 223.68 Methods for chemical analysis of iron, steel and alloy - The combustion potassium iodate volumetric method for the determination of sulfur content GB/T 223.69 Iron, steel, and alloy - Determination of carbon contents - Gas-volumetric method after combustion in the pipe furnace GB/T 11170 Stainless steel - Determination of multi-element contents - Spark discharge atomic emission spectrometric method (routine method) GB/T 13012 Methods of measurement of DC magnetic properties of magnetically soft materials GB/T 20066 Steel and iron - Sampling and preparation of samples for the determination of chemical composition GB/T 20123 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) YB/T 5242 General rules of packaging, marking, and quality certification for precision alloys3 Order contentThe contract or order ordered in accordance with this standard shall include the following information. a) This standard number; b) Alloy designation; c) Size; d) Weight or quantity; e) Delivery status; f) Other special requirements made by the purchaser, which shall, after determined by the supplier and the purchaser through negotiation, be indicated in the contract. Inspection and acceptance of alloy materials are conducted by the quality inspection department of the supplier, AND the purchaser may also conduct inspection in accordance with the provisions of this standard. 7.2 Batching rules Alloy material shall be submitted for inspection and acceptance by batches, AND each batch shall be the alloy materials of the same alloy designation, the same melting furnace number, and the same specification. 7.3 Sampling location and sampling quantity The sampling location and the sampling quantity of the alloy shall comply with the requirements of Table 5. 7.4 Re-inspection and judgment rules 7.4.1 When the magnetic properties of the alloy are disqualified, it is allowed to re-take two samples for re-inspection. If the re-inspection result is still disqualified, the batch will not be accepted. However, the supplier may change the heat treatment system AND re-submit it as a new batch for inspection. 7.4.2 If the size, shape and surface quality is disqualified, the single coil will be judged as disqualified.8 Packaging, marking and quality certificate8.1 The packaging, marking and quality certificate of the alloy materials shall comply with the requirements of YB/T 5242. 8.2 With the agreement between the supplier and the purchaser, the supplier may use other materials that guarantee that the surface quality and magnetic properties of the wire material are not affected in the transport and storage. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 14989-2015 be delivered?Answer: The full copy PDF of English version of GB/T 14989-2015 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 14989-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14989-2015_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 14989-2015 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 14989-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14989-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 14989-2015?A step-by-step guide to download PDF of GB/T 14989-2015_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 14989-2015". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
