GB 32166.1-2016 PDF EnglishUS$155.00 · In stock · Download in 9 seconds
GB 32166.1-2016: Personal protective equipment - Eye and face protection - Occupational eye and face protectors - Part 1: Requirements Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Obsolete
Similar standardsGB 32166.1-2016: Personal protective equipment - Eye and face protection - Occupational eye and face protectors - Part 1: Requirements---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB32166.1-2016 NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 13.340 C 73 Personal protective equipment - Eye and face protection - Occupational eye and face protectors - Part 1.Requirements Issued on. MARCH 24, 2016 Implemented on. MARCH 01, 2017 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of PRC. Table of ContentsForeword... 3 1 Scope... 4 2 Normative references... 4 3 Terms and definitions... 5 4 Classification of occupational eye and face protectors... 5 4.1 Functional types of occupational eye and face protectors... 5 4.2 Types of occupational eye and face protectors... 5 5 Basic requirements... 6 5.1 Harmless... 6 5.2 Headband... 6 5.3 Minimum size requirements for assembled lenses... 6 5.4 Optical requirements... 7 5.5 Strength... 8 5.6 Anti-aging performance... 9 5.7 Flame-retardance... 10 5.8 Packaging and marking... 10 6 Special requirements... 11 6.1 Requirements for optical radiation protection... 11 6.2 Additional requirements for eye and face protectors for non-radiation industries ... 15 Appendix A (Normative) Types of light radiation and determination of shading number... 18 References... 19ForewordChapter 5 of this part is mandatory; the rest are recommended. “Personal protective equipment - Eye and face protection - Occupational eye and face protectors” is divided into two parts. - Part 1.Requirements (GB 32166.1); - Part 2.Measurement method (GB/T 32166.2). This part is the first part of GB 32166. This part was drafted in accordance with the rules given in GB/T 1.1-2009. This part was proposed by the State Administration of Work Safety. This part shall be under the jurisdiction of the National Personal Protective Equipment Technical Committee (SAC/TC 112). Drafting organizations of this part. China National Institute of Standardization, Shanghai Institute of Work Safety Science, Honeywell Safety Equipment (Shanghai) Co., Ltd., Taizhou Yuyuan Safety Protective Products Co., Ltd., Guangzhou Institute of Metrology and Testing Technology. The main drafters of this part. Huang Shuai, Guo Dehua, Shang Jinglin, Wang Xiang, Guo Ya, Xu Sheng, Chen Wenbin, Ma Shengnan, Li Yuhao. Personal protective equipment - Eye and face protection - Occupational eye and face protectors - Part 1.Requirements1 ScopeThis part of GB 32166 specifies the classification, basic requirements and special requirements of occupational eye and face protectors. This part applies to clear lens protector or components used to protect eye or face safety in occupational eye and face protectors (mainly for industrial protection). This part does not apply to. a) General purpose sunglasses and sunglass lens or eye and face protectors with vision correction; b) Eye and face protectors used by patients to protect against exposure during diagnosis or treatment; c) Products that directly observe the sun, such as eye protection for observing solar eclipses; d) Sports eye and face protectors; e) Short-circuit arc eye and face protectors; f) Welding eye and face protectors; g) Laser eye and face protectors.2 Normative referencesThe following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this standard. GB/T 30042-2013 Personal protective equipment - Eye and face protection - Vocabulary (ISO 4007.2012, MOD)3 Terms and definitionsThe terms and definitions defined in GB/T 30042 apply to this document.4 Classification of occupational eye and faceprotectors 4.1 Functional types of occupational eye and face protectors The function of occupational eye and face protector refers to the ability to protect against one or more of the following dangers. 4.2 Types of occupational eye and face protectors According to the structure and style, occupational eye and face protector can be divided into the following types.5 Basic requirements5.1 Harmless Occupational eye and face protectors in contact with the skin shall meet the requirements of the purpose of use and the environment of use. There shall be no factors that endanger the user's health or safety. 5.2 Headband The headband shall be adjustable or self-adjusting. Without external force, the width of the contact between the headband that plays the main role in fixing the head and the face of the wearer shall not be less than 5 mm. 5.3 Minimum size requirements for assembled lenses The minimum size of the assembled lens shall meet the requirements of Table 1. 5.4 Optical requirements 5.4.1 Spherical, cylindrical, prismatic degrees 5.4.2 Visible light transmittance Test according to the method specified in 5.3 of GB/T 32166.2-2015.For colorless lenses, the visible light transmittance at the reference point shall not be less than 85%. 5.4.3 Scattered light 5.4.3.1 Wide-angle scattering (haze) When the visible light transmittance of the occupational eye and face protector is greater than or equal to 15%, the test is performed according to the method specified in 5.4 of GB/T 32166.2-2015. 5.5 Strength 5.5.1 Minimum strength of unassembled lens Perform the test according to the method specified in 6.1.1 of GB/T 32166.2- 2015.After the test, the sample shall not show the following conditions. 5.5.2 Minimum strength for occupational eye and face protector Perform the test according to the method specified in 6.1.2 of GB/T 32166.2- 2015.After the test, the sample shall not show the following conditions. 5.6 Anti-aging performance 5.6.1 Thermal resistance The test shall be performed in accordance with the method specified in 6.2 of GB/T 32166.2-2015.The sample after the test shall not be deformed, peeled or damaged. 5.8 Packaging and marking 5.8.1 Packaging Products shall be properly packaged and must be accompanied by a product certificate and instruction manual. 5.8.2 Marking Provide the following information in one or any combination of occupational eye and face protector, labels, product’s minimal packaging, instruction manuals.6 Special requirements6.1 Requirements for optical radiation protection 6.1.1 Specific requirements for different types of filters 6.1.1.1 UV attenuation filter The specific requirements for UV attenuation filters are as follows. UV attenuation filters that cannot meet the requirements of scattered light are identified by the code U; the others are identified by the code UC. 6.1.1.2 IR attenuation filter The specific requirements of the infrared attenuation filter are as follows. The infrared attenuation filter that cannot meet the selectivity requirements for color recognition in item b) is identified by the code I, whilst those that meet the requirements are identified by the code IC. 6.1.1.3 Anti-glare filter 6.1.1.3.1 Transmittance requirements The transmittance of the anti-glare filter shall meet the requirements of Table 8. 6.2 Additional requirements for eye and face protectors for non-radiation industries 6.2.1 Protection from high-speed particle impact Occupational eye and face protection against high-speed particle impact must have side protection. 6.2.2 Anti-impact performance of heavy objects This clause applies to the protective performance of occupational eye and face protector against large-mass impact from high places. It is tested in accordance with the method specified in 6.7 of GB/T 32166.2-2015. 6.2.3 Droplet protection (only applicable to goggle-type protector) Test in accordance with the method specified in 6.8 of GB/T 32166.2-2015. Occupational eye and face protector with droplet protection shall meet the following requirements. 6.2.4 Anti-fogging of lens Test the sample in accordance with the method specified in 6.10 of GB/T 32166.2-2015.The sample shall not be fogged for at least 8 s.Appendix A(Normative) Types of light radiation and determination of shading number A.1 Types of optical radiation Occupational eye and face protector (excluding laser eye protector and welding protector) can be used to protect the radiation from natural light or artificial light sources, such as sunlight which has a wavelength in the ultraviolet spectrum range, visible spectrum range and infrared spectrum range. Ultraviolet spectrum is usually divided into 3 parts, long-wave ultraviolet (UV-A) is 380 nm ~ 315 nm, medium-wave ultraviolet (UV-B) is 315 nm ~ 280 nm, far ultraviolet (FUV) is 280 nm ~ 180 nm. FUV is part of short-wave ultraviolet (UV- C) with a wavelength of 100 nm ~ 280 nm. Because air has a strong absorption of light radiation with a wavelength range of less than 180 nm, professional eye protectors no longer consider this wavelength band. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB 32166.1-2016 be delivered?Answer: The full copy PDF of English version of GB 32166.1-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB 32166.1-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB 32166.1-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 32166.1-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB 32166.1-2016?A step-by-step guide to download PDF of GB 32166.1-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB 32166.1-2016". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
