GB 15629.1104-2006 PDF EnglishUS$910.00 · In stock · Download in 9 seconds
GB 15629.1104-2006: Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area networks -- Specific requirements -- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB 15629.1104-2006: Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area networks -- Specific requirements -- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB15629.1104-2006 NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 35.110 L 78 Information Technology – Telecommunications and Information Exchange between Systems – Local and Metropolitan Area Networks – Specific Requirements – Part 11.Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications. Further Higher Data Rate Extension in the 2.4 GHz Band (ISO/IEC 8802-11.2005/Amd4.2005, MOD) Issued on. JANUARY 27, 2006 Implemented on. JUNE 8, 2006 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of the People’s Republic of China. Table of ContentsForeword... 5 1 Scope... 7 2 Normative References... 7 3 Terms and Definitions... 8 4 Abbreviations... 8 5 Overview... 8 6 Extension Rate PHY Specifications... 9 6.1 Overview... 9 6.1.1 Introduction... 9 6.1.2 Working mode... 9 6.1.3 Range... 11 6.1.4 Extension rate PHY layer functions... 12 6.2 PHY-specific service parameter list... 12 6.3 Extension rate PLCP sublayer... 14 6.3.1 Introduction... 14 6.3.2 PPDU format... 14 6.3.3 PLCP data modulation and rate change... 19 6.3.4 PLCP transmit procedure... 24 6.3.5 CCA... 24 6.3.6 PLCP receive procedure... 25 6.4 ERP PMD operating specifications (general)... 25 6.4.1 Regulatory requirements... 25 6.4.2 Operating channel frequencies... 26 6.4.3 Transmit and receive in-band and out-of-band spurious emissions... 26 6.4.4 Slot time... 26 6.4.5 SIFS value... 26 6.4.6 CCA performance... 26 6.4.7 PMD transmit specifications... 27 6.5 ERP operation specifications... 27 6.5.1 Receiver minimum input level sensitivity... 27 6.5.2 Adjacent channel rejection... 28 6.5.3 Receive maximum input level capability... 28 6.5.4 Transmit spectral mask... 28 6.6 ERP-PBCC operation specifications... 28 6.6.1 Receiver minimum input level sensitivity... 29 6.6.2 Receiver adjacent channel rejection... 29 6.7 DSSS-OFDM operation specifications... 29 6.7.1 Overview... 29 6.7.2 Single carrier to multicarrier transition requirements... 30 6.8 ERP PLME... 41 6.8.1 PLME SAP... 41 6.8.2 MIB... 41 6.8.3 TXTIME (transmitting time)... 42 6.8.4 ERP-OFDM PLCP PSDU definition... 46 6.9 Extended Rate PMD sublayer... 47 6.9.1 Scope and field of application... 47 6.9.2 Overview of service... 47 6.9.3 Overview of Interactions... 47 6.9.4 Basic service and options... 47 6.9.5 PMD_SAP detailed service specification... 50 Annex A (Normative) Protocol Implementation Conformance Statement (PICS) Proforma... 53 A.1 IUT configuration... 53 A.2 MAC protocol capability... 53 A.3 ERP Physical Layer functions... 58 Annex B (Normative) Modifications to GB 15629.11-2003 and GB 15629.1102-2003 ... 62 B.1 Frame formats... 62 B.1.1 Control frames... 62 B.1.2 Management frames... 62 B.1.3 Management frame body components... 65 B.1.4 Information elements... 68 B.2 MAC sublayer functional description... 72 B.2.1 DCF... 72 B.2.2 NAV distribution... 73 B.2.3 Determination of PLME aCWmin characteristics... 73 B.2.4 Multirate support... 73 B.2.5 Frame exchange sequence... 74 B.2.6 Protection mechanism... 75 B.3 Layer management... 76 B.3.1 PLME-DSSSTESTMODE... 76 B.4 High Rate direct sequence spread spectrum (HR/DSSS) PHY specification... 77 B.4.1 High Rate PLCP sublayer... 77 Annex C (Normative) Formal Description of MAC Operation... 79 Annex D (Normative) ASN.1 Coding of MAC and PHY MIB... 85 Annex NA (Informative) Clause Comparison Table of this Part, ISO/IEC 8802- 11.2005/Amd4.2005, and GB 15629.11-2003... 90ForewordThe Subclauses 6.4.1, 6.4.2, 6.4.3 and 6.4.7 of this Part are mandatory, while the rest are recommended. This Part revised and adopted the international standard ISO/IEC 8802-11.2005/Amd4.2005 Information Technology – Telecommunications and Information Exchange between Systems – Local and Metropolitan Area Networks – Specific Requirements – Part 11.Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications. Further Higher Data Rate Extension in the 2.4 GHz Band (2005 English Edition). This Part is sub-item of GB 15629.11-2003 Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 11.Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications. In addition to the further higher data rate extension in the 2.4 GHz Band must comply with the provisions of this Part, the wireless LAN and other characteristics must comply with the provisions of GB 15629.11-2003 Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 11.Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications, Clause 6 of GB 15629.1102-2003 Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements--Part 11.Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications. Higher-Speed Physical Layer Extension Specification in 2.4 GHz Band, as well as other national standard on the extension sub-items. Compared with ISO/IEC 8802-11.2005/Amd4.2005, the major technical differences of this Part are as follows. Add relevant Chinese contents in the Clauses and Annexes related to the radio emission. For the ease of use, compared with ISO/IEC 8802-11.2005/Amd4.2005, the structure of this Part has made the editorial adjustments, which can be referred to in Annex NA. The Annex NA lists the clause correspondence between this Part and GB 15629.11-2003. In this Part, Annexes A, B, C and D are normative; while the Annex NA is informative. This Part was proposed by Ministry of Industry and information Technology of the People’s Republic of China. This Part shall be under the jurisdiction of China Electronics Standardization Institute. Drafting organization of this Part. China IWNCOMM Co., Ltd. Participating drafting organizations of this Part. State Radio Monitoring Center; Commercial Cryptography Testing Center of State Cryptography Administration; China Electronics Standardization Institute; Xidian University; Xi’an University of Posts & Telecommunications; Beijing Digipro Information Technology Co., Ltd.; Beijing University of Posts & Telecommunications; Xi’an Jiaotong University; Fujian Star-net Communication Co., Ltd.; Lenovo (Beijing) Limited; Zhongxing Telecommunication Equipment Corporation; GCI Science & Technology Co., Ltd.; Beijing LHWT Microelectronics Co., Ltd.; TCL Communication Equipment(Huizhou) Co., Ltd.; CEC Huada Electronic Design Co., Ltd.; Beijing Founder Link Communications Technology Co., Ltd.; Beijing Xinguang Tiandi Integration Circuit Design Co., Ltd.; Shenzhen Xihe Technology Co., Ltd.; and Beijing P & T Communications Equipment Factory. Chief drafting staffs of this Part. Guo Hong, Cao Jun, Huang Zhenhai, Tie Manxia, Pang Liaojun, Zhang Bianling, Song Qizhu, Liu Wei, Li Dawei, Ye Xumao, Tu Xuefeng, Lei Xuken, Sun Bo, Guo Dawei, Deng Kaiyong, Wang Kun, Xu Dongmei, Yao Zhongbang, Huang Yiping, Dou Xiangyang, Xu Fuying, Zhang Yang, Lin Shanhe, Ren Pinyi, Zhang Ping, Cao Qingrong, Mao Zhouming, Huo Jian, Liu Mingyu, Huang Yu, Lin Guoqiang, Liu Pei. Information Technology – Telecommunications and Information Exchange between Systems – Local and Metropolitan Area Networks – Specific Requirements – Part 11.Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications. Further Higher Data Rate Extension in the 2.4 GHz Band1 ScopeThis Part specifies the high-performance extension specification of the physical layer of the direct sequence spread spectrum system (DSSS) wireless LAN, which is a modification to the physical layer of the wireless LAN specified in Clause 15 of GB 15629.11-2003 and Clause 6 of GB 15629.1102-20032 Normative ReferencesThe provisions in following documents become the provisions of this Part through reference in this Part. For dated references, the subsequent amendments (excluding corrigendum) or revisions do not apply to this Part, however, parties who reach an agreement based on this Standard are encouraged to study if the latest versions of these documents are applicable. For undated references, the latest edition of the referenced document applies.3 Terms and DefinitionsIn addition to the following terms and definitions, the terms and definitions given in GB 15629.11-2003 are applicable to this Part. Any procedure that attempts to update the NAV of all receiving STAs prior to the transmission of a frame that may or may not be understood by receivers.4 AbbreviationsIn addition to the following abbreviations, the abbreviations in Clause 4 of GB 15629.11-2003 and Clause 4 of GB 15629.1102-2003 are applicable to this Part.5 OverviewThis Part, as a modification of GB 15629.11-2003 and GB 15629.1102-2003, defines a higher data rate extension physical layer specification for wireless LAN in the 2.4 GHz band, where the physical layer uses Direct Sequence Spread Spectrum (DSSS).6 Extension Rate PHY SpecificationsAll radio parts of ERP systems that comply with this subclause shall implement all mandatory modes in Clause 6 of GB 15629.1101-2006 and Clause 6 of GB 15629.1102-2003, unless it uses 2.4 GHz band and channel plan as specified in 6.4.6 of GB 15629.1102-2003.Annex A(Normative) Protocol Implementation Conformance Statement (PICS) Proforma The contents of this Annex are the same as Annex A of GB 15629.11-2003 except that the following modifications are made to Annex A of GB 15629.11-2003. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB 15629.1104-2006 be delivered?Answer: The full copy PDF of English version of GB 15629.1104-2006 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB 15629.1104-2006_English with my colleagues?Answer: Yes. The purchased PDF of GB 15629.1104-2006_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 15629.1104-2006 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB 15629.1104-2006?A step-by-step guide to download PDF of GB 15629.1104-2006_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB 15629.1104-2006". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
