FZ/T 64007-2019 PDF EnglishUS$229.00 · In stock · Download in 9 seconds
FZ/T 64007-2019: Resin-finished woven interlinings Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid FZ/T 64007: Historical versions
Similar standardsFZ/T 64007-2019: Resin-finished woven interlinings---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/FZT64007-2019Resin-finished woven interlinings ICS 59.080.30 W13 People's Republic of China Textile Industry Standard Replace FZ/T 64007-2010 Resin woven lining Published on.2019-05-02 2019-11-01 implementation Ministry of Industry and Information Technology of the People's Republic of China ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces FZ/T 64007-2010 "woven resin lining", the main technical changes compared with FZ/T 64007-2010 are as follows. ---The standard name is adjusted to "resin woven lining"; --- Increased the definition of resin woven lining; ---Physical and chemical properties increase the evaluation index of dimensional change after steam ironing of combined samples. The tear strength is evaluated according to the raw material composition. High crease recovery angle assessment indicators; --- Appearance quality locality points are divided into three grades assessment, which improves the assessment indicators of chromatic aberration and local defects; --- Removed the original Appendix A. This standard was proposed by the China National Textile and Apparel Council. This standard is under the jurisdiction of the National Textile Standardization Technical Committee Cotton Textile Subcommittee (SAC/TC209/SC10). This standard was drafted. Nantong Haihui Technology Development Co., Ltd., Weibosite Interlining (Nantong) Co., Ltd., Rugao Wushan Bleaching and Dyeing Limited liability company, Shanghai Textile Industry Technology Supervision Institute, China Industrial Textile Industry Association. The main drafters of this standard. Cao Ping, Zhu Hongyao, Jiang Qian, Wu Jin, Zhang Baoqing, Li Guimei. The previous versions of the standards replaced by this standard are. ---GB/T 11389-1989; ---FZ/T 64007-1999, FZ/T 64007-2000, FZ/T 64007-2010. Resin woven lining1 ScopeThis standard specifies the terms and definitions of resin woven lining, product classification, technical requirements, test and inspection methods, inspection rules, signs and package. This standard applies to this white, bleached and dyed resin woven lining.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 250 Textile color fastness test for gray color card for color change GB/T 3819 Determination of crease recovery of textile fabrics GB/T 3917.2 Textile fabrics - Tearing properties - Part 2. Determination of tear strength GB/T 4666 Determination of length and width of textile fabrics GB/T 4668 Determination of woven fabric density GB/T 4669-2008 Determination of mass per unit length and mass per unit area of textile woven fabrics GB/T 6529 Standard atmosphere for textile conditioning and testing GB/T 8170 Numerical Rounding Rules and Representation and Determination of Limit Values GB/T 8629-2017 Home washing and drying procedures for textile testing GB/T 14801 woven fabric and knitted fabric weft and bow weft test method GB/T 18318.1 Determination of flexural properties of textiles - Part 1 GB 18401 National Textile Products Basic Safety Technical Specifications GB/T 28465 garment lining inspection rules GB 31701 Safety technical specifications for infant and children textile products GB/T 31902 garment lining appearance defect inspection method GB/T 31903 clothing lining product naming rules, signs and packaging FZ/T 60031 clothing lining after steam ironing after dimensional change test method3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 The woven fabric made of cotton, chemical fiber pure or blended yarn is used as the base fabric, and the lining is processed by bleaching and dyeing and resin finishing.4 Product Categories4.1 Resin woven lining According to the base fiber material, it can be divided into pure cotton lining, polyester cotton lining and polyester lining. FZ/T 64007-2019 Resin-finished woven interlinings ICS 59.080.30 W13 People's Republic of China Textile Industry Standard Replace FZ/T 64007-2010 Resin woven lining Published on.2019-05-02 2019-11-01 implementation Ministry of Industry and Information Technology of the People's Republic of ChinaForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces FZ/T 64007-2010 "woven resin lining", the main technical changes compared with FZ/T 64007-2010 are as follows. ---The standard name is adjusted to "resin woven lining"; --- Increased the definition of resin woven lining; ---Physical and chemical properties increase the evaluation index of dimensional change after steam ironing of combined samples. The tear strength is evaluated according to the raw material composition. High crease recovery angle assessment indicators; --- Appearance quality locality points are divided into three grades assessment, which improves the assessment indicators of chromatic aberration and local defects; --- Removed the original Appendix A. This standard was proposed by the China National Textile and Apparel Council. This standard is under the jurisdiction of the National Textile Standardization Technical Committee Cotton Textile Subcommittee (SAC/TC209/SC10). This standard was drafted. Nantong Haihui Technology Development Co., Ltd., Weibosite Interlining (Nantong) Co., Ltd., Rugao Wushan Bleaching and Dyeing Limited liability company, Shanghai Textile Industry Technology Supervision Institute, China Industrial Textile Industry Association. The main drafters of this standard. Cao Ping, Zhu Hongyao, Jiang Qian, Wu Jin, Zhang Baoqing, Li Guimei. The previous versions of the standards replaced by this standard are. ---GB/T 11389-1989; ---FZ/T 64007-1999, FZ/T 64007-2000, FZ/T 64007-2010. Resin woven lining1 ScopeThis standard specifies the terms and definitions of resin woven lining, product classification, technical requirements, test and inspection methods, inspection rules, signs and package. This standard applies to this white, bleached and dyed resin woven lining.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 250 Textile color fastness test for gray color card for color change GB/T 3819 Determination of crease recovery of textile fabrics GB/T 3917.2 Textile fabrics - Tearing properties - Part 2. Determination of tear strength GB/T 4666 Determination of length and width of textile fabrics GB/T 4668 Determination of woven fabric density GB/T 4669-2008 Determination of mass per unit length and mass per unit area of textile woven fabrics GB/T 6529 Standard atmosphere for textile conditioning and testing GB/T 8170 Numerical Rounding Rules and Representation and Determination of Limit Values GB/T 8629-2017 Home washing and drying procedures for textile testing GB/T 14801 woven fabric and knitted fabric weft and bow weft test method GB/T 18318.1 Determination of flexural properties of textiles - Part 1 GB 18401 National Textile Products Basic Safety Technical Specifications GB/T 28465 garment lining inspection rules GB 31701 Safety technical specifications for infant and children textile products GB/T 31902 garment lining appearance defect inspection method GB/T 31903 clothing lining product naming rules, signs and packaging FZ/T 60031 clothing lining after steam ironing after dimensional change test method3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 The woven fabric made of cotton, chemical fiber pure or blended yarn is used as the base fabric, and the lining is processed by bleaching and dyeing and resin finishing.4 Product Categories4.1 Resin woven lining According to the base fiber material, it can be divided into pure cotton lining, polyester cotton lining and polyester lining. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of FZ/T 64007-2019 be delivered?Answer: The full copy PDF of English version of FZ/T 64007-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of FZ/T 64007-2019_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 64007-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- FZ/T 64007-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version FZ/T 64007-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 64007-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of FZ/T 64007-2019?A step-by-step guide to download PDF of FZ/T 64007-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "FZ/T 64007-2019". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
