|
Std ID |
Description (Standard Title) |
|
YY/T 1562-2017
|
Tissue engineering medical device products—Biomaterial scaffolds—Guide for cell viability evaluation
|
|
YY/T 1563-2017
|
Spinal implants—Test method for functional, kinematic and wear assessment of total disc prostheses
|
|
YY/T 1564-2017
|
Cardiovascular implants—Pulmonary valve conduit—Pulsatile flow test methods
|
|
YY/T 1565-2017
|
Implants for surgery—Non-destructive testing—Radiographic examination of cast metallic surgical implants
|
|
YY/T 1566.1-2017
|
Autologous blood processing devices for single use--Part 1: Blood cell recoery sets, centrifuge bowl type
|
|
YY/T 1568-2017
|
Pessary
|
|
YY/T 1570-2017
|
Tissue engineering medical device products—Terminology, classification and nomination of skin substitute
|
|
YY/T 1571-2017
|
Tissue engineering medical device products—Sodium hyaluronate
|
|
YY/T 1574-2017
|
Tissue engineering medical device products—Standard guide for immobilization or encapsulation in alginate gels
|
|
YY/T 1575-2017
|
Tissue engineering medical device products—Standard guide for in vivo assessment of implantable devices intended to repair or regenerate bone defect
|
|
YY/T 1576-2017
|
Tissue engineering medical device products—Standard practice for implantation assessment of absorbable/resorbable biomaterials
|
|
YY/T 1577-2017
|
Tissue engineering medical device products—Standard guide for microstructure of polymeric scafforlds
|
|
YY 0017-2016
|
Implants for osteosynthesis - Metallic bone plates
|
|
YY 0018-2016
|
Implants for osteosynthesis - Metallic bone screws
|
|
YY 0053-2016
|
Hemodialysis and relevant therapies - Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators
|
|
YY 0065-2016
|
Ophthalmic instruments - Slit-lamp microscopes
|
|
YY 0267-2016
|
Hemodialysis and related therapies. Extracorporeal blood circuit for blood purification devices
|
|
YY 0271.1-2016
|
Dentistry - Water-based cements - Part 1: Powder/liquid acid-base cements
|
|
YY 0271.2-2016
|
Dentistry - Water-based cements - Part 2: Resin-modified cements
|
|
YY 0299-2016
|
Medical ultrasonic couplants
|
|
YY 0302.2-2016
|
Dentistry - Rotary bur instruments - Part 2: Finishing burs
|
|
YY 0315-2016
|
Wrought titanium and titanium dental implant
|
|
YY 0325-2016
|
Sterile urethral catheter for single use
|
|
YY 0502-2016
|
Joint replacement implants - Knee joint prostheses
|
|
YY 0503-2016
|
Ethylene oxide sterilizer
|
|
YY 0504-2016
|
Portable mode steam sterilizers
|
|
YY 0579-2016
|
Ophthalmic instruments - Ophthalmometers
|
|
YY 0592-2016
|
High intensity focused ultrasound therapy system
|
|
YY 0604-2016
|
Cardiopulmonary bypass systems - Blood-gas exchangers(oxygenators)
|
|
YY 0605.12-2016
|
Implants for surgery. Metallic materials. Part 12: Wrought cobalt-chromium-molybdenum alloy
|
|
YY 0621.1-2016
|
Dentistry. Compatibility testing. Part 1: Metal-ceramic systems
|
|
YY 0649-2016
|
Electrical potential therapy equipment
|
|
YY 0714.2-2016
|
Dentistry - Soft lining material for removable dentures - Part 2: Materials for long-term use
|
|
YY 0792.1-2016
|
Ophthalmic instruments - Endoilluminators - Part 1: Requirements and test methods
|
|
YY 0803.3-2016
|
Dentistry. Root-canal instruments. Part 3: Condensers
|
|
YY 0983-2016
|
Therapeutic laser equipment. Ruby Laser equipment for therapy
|
|
YY 0989.6-2016
|
Implants for surgery - Active implantable medical devices - Part 6: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia(including implantable defibrillators)
|
|
YY 0992-2016
|
Endoscopic washing station
|
|
YY 1048-2016
|
Cardiopulmonary bypass systems. Extracorporeal blood circuit
|
|
YY 1057-2016
|
General specifications for medical foot switch
|
|
YY 1271-2016
|
Cardiopulmonary bypass systems. Suction catheter for single use
|
|
YY 1272-2016
|
Dialysis fluid filter
|
|
YY 1273-2016
|
Roller pump for auxiliary blood purification
|
|
YY 1274-2016
|
Pressure control peritoneal dialysis equipment
|
|
YY 1275-2016
|
Dry heat (heated air) sterilizers
|
|
YY 1276-2016
|
(Development, validation and routine control requirements for dry heat sterilization of medical devices)
|
|
YY 1277-2016
|
Steam sterilizer - Performance requirements of biosafety
|
|
YY 1289-2016
|
Laser treating equipment - Ophthalmic semiconductor laser photocoagulators
|
|
YY 1290-2016
|
Single use bilirubin plasma hemoperfutor
|
|
YY 1298-2016
|
Medical endoscopes - Capsule endoscopes
|
|
YY 1300-2016
|
Therapeutic laser equipment - Pulsed Nd: YAG laser equipment for therapy
|
|
YY 1301-2016
|
Therapeutic laser equipment - Er: YAG laser equipment for therapy
|
|
YY 1412-2016
|
Cardiopulmonary bypass systems. Centrifugal pump
|
|
YY 1413-2016
|
Centrifugal blood components separation device
|
|
YY 1468-2016
|
Oxygen concentrator supply systems for use with medical gas pipeline systems
|
|
YY 1475-2016
|
Laser therapeutic equipment - Q-Switched Nd: YAG laser equipment
|
|
YY 1493-2016
|
Gravity control peritoneal dialysis equipment
|
|
YY/T 0043-2016
|
Medical suture needle
|
|
YY/T 0064-2016
|
Electrical and loading characteristics of X-ray tube assemblies for medical diagnosis
|
|
YY/T 0079-2016
|
Metallic clip
|
|
YY/T 0127.18-2016
|
Biological evaluation of medical devices used in dentistry－Part 18: Dentine barrier cytotoxicity test
|
|
YY/T 0165-2016
|
Medical heating pad therapy equipment
|
|
YY/T 0215-2016
|
Ozone disinfector for medical purpose
|
|
YY/T 0243-2016
|
Plunger seal of syringes for single use
|
|
YY/T 0291-2016
|
Environmental requirements and test methods for medical X-ray equipment
|
|
YY/T 0294.1-2016
|
Surgical instruments--Metallic materials--Part 1: Stainless steel
|
|
YY/T 0316-2016
|
Medical devices - Application of risk management to medical devices
|
|
YY/T 0450.3-2016
|
Accessory devices for sterile single-use intravascular catheters--Part 3: Inflation devices for balloon of balloon dilatation catheters
|
|
YY/T 0467-2016
|
Medical devices-Guidance on the selection of standards in support of recognized essential principles of safety and performance of medical devices
|
|
YY/T 0481-2016
|
Medical diagnostic X-ray equipment--Radiation conditions for use in the determination of characteristics
|
|
YY/T 0486-2016
|
Tracheal tubes designed for laser surgery--Requirements for marking and accompanying information
|
|
YY/T 0496-2016
|
Dentistry. Casting and baseplate waxes
|
|
YY/T 0506.2-2016
|
Surgical drapes, gowns and clean air suits for patients, clinical staff and equipment. Part 2: Performance requirements and test methods
|
|
YY/T 0506.4-2016
|
Surgical drapes, gowns and clean air suits for patients, clinical staff and equipment--Part 4: Test method for linting in the dry state
|
|
YY/T 0567.7-2016
|
Aseptic processing of health care products--Part 7: Alternative processes for medical devices and combination products
|
|
YY/T 0583.2-2016
|
Chest drainage systems for single use--Part 2: Type of dry seal valve
|
|
YY/T 0589-2016
|
Electrolyte analyzer
|
|
YY/T 0616.1-2016
|
Medical gloves for single use--Part 1: Requirements and testing for biological evaluation
|
|
YY/T 0616.2-2016
|
Medical glove for single use--Part 2: Requirements and testing for shelf life determination
|
|
YY/T 0624-2016
|
Dentistry--Elastomeric auxiliaries for use in orthodontics
|
|
YY/T 0625-2016
|
Dentistry--Wires for use in orthodontics
|
|
YY/T 0651.1-2016
|
Implants for surgery. Wear of total hip-joint prostheses. Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
|
|
YY/T 0652-2016
|
Wear of implant materials. Polymer and metal wear particles. Isolation and characterization
|
|
YY/T 0663.2-2016
|
Cardiovascular implants Endovascular devices--Part 2: Vascular stents
|
|
YY/T 0663.3-2016
|
Cardiovascular implants. Endovascular devices. Part 3: Vena cava filters
|
|
YY/T 0679-2016
|
Low temperature steam and formaldehyde sterilizers for medical purposes
|
|
YY/T 0697-2016
|
Electric cervical and lumbar traction therapy device
|
|
YY/T 0722-2016
|
Medical electrical equipment--Dosimetric instrument used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
|
|
YY/T 0734.4-2016
|
Washer-disinfectors. Part 4: Requirements and tests for washer-disinfectors employing thermal disinfection for non-invasive medical devices, etc.
|
|
YY/T 0752-2016
|
Electrical surgical equipment for osseous tissue
|
|
YY/T 0803.5-2016
|
Dentistry--Endodontic instruments--Part 5: Shaping and cleaning instruments
|
|
YY/T 0869.1-2016
|
Medical devices. Hierarchical coding structure for adverse events. Part 1: Event-type codes
|
|
YY/T 0869.2-2016
|
Medical devices. Hierarchical coding structure for adverse events. Part 2: Evaluation codes
|
|
YY/T 0905.1-2016
|
Dentistry--Plant area equipment--Part 1: Suction systems
|
|
YY/T 0967.3-2016
|
Dental rotary instruments--Shanks--Part 3: Shanks made of ceramics
|
|
YY/T 0971-2016
|
Multi-element beam limiting device used in radiotherapy. Characteristics and test methods
|
|
YY/T 0972-2016
|
Active implantable medical devices--Four-pole connector system for implantable cardiac rhythm management devices--Dimensional and test requirements
|
|
YY/T 0973-2016
|
Radiotherapy treatment planning system for automatically-controlled brachytherapy afterloading equipment--Characteristics and test methods
|
|
YY/T 0975-2016
|
Anaesthetic and respiratory equipment--User-applied labels for syringes containing drugs used during anaesthesia--Colours, design and performance
|
|
YY/T 0976-2016
|
Medical electrical equipment--Dosimeters with ionization chambers as used in radiotherapy
|