|
Std ID |
Description (Standard Title) |
|
YD/T 2278-2011
|
Test methods for access network equipment very high speed digital subscriber line 2 (VDSL2)
|
|
YD/T 2279-2011
|
Test method for access network -interoperability of GPON system
|
|
YD/T 2280-2011
|
Technical requirements based on terminal power over ethernet(TPoE)for access network equipment
|
|
YD/T 2281-2011
|
Fibre optic socket-outlets case
|
|
YD/T 2282-2011
|
Technical requirements for symmetrical cables at and below 3GHz used in telecommunication equipment
|
|
YD/T 2283-2011
|
Optical fiber submarine cables for deep water
|
|
YD/T 2284-2011
|
Optic fiber ribbon for terminated optical assemblies
|
|
YD/T 2285-2011
|
Protection closure for coaxial cable joints and earthing
|
|
YD/T 2286-2011
|
Single fiber bi-directional subassembly for 10Gbit/s EPON OLT/ONU
|
|
YD/T 2287-2011
|
Insulated wines with conductor diameter below 0.8 mm
|
|
YD/T 2288.1-2011
|
Technical specification of optical sub-assembly for small form factor pluggable transceiver module (SFP). Part 1: Coaxial transmitter optical sub-assembly (TOSA)
|
|
YD/T 2288.2-2011
|
Technical specification of optical sub-assembly for small form factor pluggable transceiver module (SFP). Part 2: Coaxial receiver optical sub-assembly (ROSA)
|
|
YD/T 2289.1-2011
|
Cable for wireless remote radio unit. Part 1: Optical fiber cable
|
|
YD/T 2289.2-2011
|
Cable of wireless remote radio unit. Part 2: Power wires
|
|
YD/T 2289.3-2013
|
Cable for wireless remote radio unit. Part 3: optical and electrical hybrid cables
|
|
YD/T 2290-2011
|
Technical requirements for interworking between unified IMS and softswitch
|
|
YD/T 2291-2011
|
Technical requirements of interrogating call session control function/serving call session control function (I-CSCF/S-CSCF) of the unified IMS (Release 1)
|
|
YD/T 2292-2011
|
Test method of interrogating/serving call control function (I-CSCF/S-CSCF) of the unified IMS (Release 1)
|
|
YD/T 2293-2011
|
Testing method of proxy call control function (P-CSCF) of the unified IMS (Release 1)
|
|
YD/T 2294-2011
|
Testing method of home subscriber server(HSS)of the unified IMS (Release 1)
|
|
YD/T 2295-2011
|
Technical requirements of services based on the unified IMS. Click to dial service (Release 1)
|
|
YD/T 2296-2011
|
Dynamic host configuration protocol for IPv6 (DHCPv6)
|
|
YD/T 2297-2011
|
Tethnology specification for IPv6 session
|
|
YD/T 2298-2011
|
Service flows distribution and handoff management technique based on MIPv6
|
|
YD/T 2299-2011
|
Technical requirement for XML configuration access protocol (XCAP)
|
|
YD/T 2300-2011
|
eXtensible access control markup language (XACML 2.0)
|
|
YD/T 2301.1-2011
|
Information and communications convergence services specification in SMEs. Part 1: Service requirements
|
|
YD/T 2301.2-2011
|
Information and communication convergence services specification in SMEs. Part 2: Technical requirement
|
|
YD/T 2302-2011
|
Technical specification for pseudowire emulation of TDM service over ethernet networks
|
|
YD/T 2303-2011
|
Technical requirements for VPLS with PBB extension
|
|
YD/T 2304-2011
|
Test specification for IP multicast service
|
|
YD/T 2305-2011
|
Technical requirement for interfaces of instant communication and voice communication for unified communications
|
|
YD/T 2306-2011
|
Technical requirements and test methods for DC power adapter used in vehicles and interface for mobile telecommunication terminal equipment
|
|
YD 223-1981
|
(Cross Steel)
|
|
YD/T 2308-2011
|
Transmission performance requirements and test methods for narrowband voice communication devices in vehicle
|
|
YD/T 2309-2011
|
Methods for the subjective assessment of audio qqality
|
|
YD/T 2310-2011
|
Versatile audio codec for telecommunications
|
|
YD/T 2311-2011
|
The parameter and measurement of energy saving for the mobile equipment
|
|
YD/T 2312-2011
|
Measurement methods and parameters for energy saving in cordless
|
|
YD/T 2313-2011
|
Definitions, symbols and commands for information acoessibdity
|
|
YD/T 2314-2011
|
Technique requirement of encapsulation methods for transport of ethernet over MPLS networks
|
|
YD/T 2315-2011
|
Test specification for virtual lan service over MPLS using label distribution protocol signaling
|
|
YD/T 2316-2011
|
Technical requirements of network management system for Layer 2 VPN service based on LDP
|
|
YD/T 2317.1-2011
|
MPLS multicast technical specification. Part 1: Technical requirements for IP multicast in a multi-protocol label switching environment
|
|
YD/T 2317.2-2011
|
MPLS multicast technical specification. Part 2: Technical specification for point-to-multipoint TE label switched paths based on RSVP-TE protocol
|
|
YD/T 2317.3-2011
|
MPLS multicast technical specification. Part 3: Technical specification for point-to-multipoint and multipoint-to-multipoint label switched paths based on label distribution protocol
|
|
YD/T 2317.4-2011
|
MPLS multicast technical specification. Part 4: Technical requirement for service interface between MPLS multicast and multicast virtual private network
|
|
YD/T 2318-2011
|
Technical requirements and test methods of the integrated air conditioner with fresh air cooling for BTS
|
|
YD/T 2319-2011
|
Technical requirements and test methods for network cabinet of data equipments
|
|
YD/T 2320-2011
|
Copper clad aluminum power wires for communications
|
|
YD/T 2321-2011
|
Technical requirements and testing methods for converting mode solar power controller for telecommunications
|
|
YD/T 2322-2011
|
AC Power distributing cabinet for data equipment
|
|
YD/T 2323-2011
|
Low-voltage parallel active power filter for telecommunications
|
|
YD/T 2323-2016
|
Power quali ty compensator for telecommuni cation power distribution system
|
|
YD/T 2324-2011
|
Technical specification and test methods for lightning protection of radio base stations
|
|
YD/T 2325-2011
|
Classification of interfaces for equipment to be connected to information and communications technology networks
|
|
YD/T 2326-2011
|
Test method of interworking devices for softswitch network
|
|
YD/T 2327-2011
|
Technical requirements and testing methods for charging performance of ADSL system
|
|
YD/T 2328-2011
|
Fundamental characteristics and requirements of future packet based networks
|
|
YD/T 2329.1-2011
|
The technical architecture for packet telecommunication data network (PTDN). Part 1: general
|
|
YD/T 2329.2-2011
|
The technical architecture for packet telecommunication data network (PTDN). Part 2: Data link layer
|
|
YD/T 2329.3-2011
|
The technical architecture for packet telecommunication data network (PTDN). Part 3: Network layer
|
|
YD/T 2329.4-2011
|
The technical architecture for packet telecommunication data network (PTDN). Part 4: Routing
|
|
YD/T 2329.5-2011
|
The technical architecture for packet telecommunication data network (PTDN). Part 5: Reliability
|
|
YD/T 2329.6-2011
|
The technical architecture for packet telecommunication data network (PTDN). Part 6: Security and quality of service
|
|
YD/T 2329.7-2011
|
The technical architecture for packet telecommunication data network (PTDN). Part 7: Network interworking
|
|
YD/T 2330.1-2011
|
Common IMS network management interface technical specification. Part 1: Information model
|
|
YD/T 2330.2-2011
|
Common IMS network management interface technical specification. Part 2: CORBA based information model design
|
|
YD/T 2331-2011
|
ICT service catalog management technical specification
|
|
YD/T 2332-2011
|
Mobile bar code recognition service technical requirements
|
|
YD/T 2333.1-2011
|
2GHz TD-SCDMA/WCDMA digital cell mobile communications network HSPA+ management technical specification. Part 1: Information model
|
|
YD/T 2333.2-2011
|
2GHz TD-SCDMA/WCDMA digital cell mobile communications network HSPA+ management technical specification. Part 2: CORBA based information model design
|
|
YD/T 2333-2011
|
2GHz TD-SCDMA/WCDMA digital cellular mobile communication network Evolved High Speed ??Packet Access (HSPA +) network management technology requirements - Part 1: Information Model
|
|
YD/T 2334-2011
|
Consistency test methods for disaster recovery data
|
|
YD/T 2335.1-2011
|
800M/2GHz CDMA2000 digital cellular mobile communication network service provision management interface technical specification. Part 1: Information model
|
|
YD/T 2335.2-2011
|
800M/2GHz CDMA2000 digital cellular mobile communication network service provision management interface technical specification. Part 2: SOAP based information model design
|
|
YD/T 2336.1-2011
|
Technical requirements for packet transport network management. Part 1: basic principle
|
|
YD/T 2336.1-2016
|
(Packet Transport Network (PTN) network management technology - Part 1: Basic Principles)
|
|
YD/T 2336.2-2011
|
Technical requirements for packet transport network management. Part 2: NMS system function
|
|
YD/T 2336.2-2016
|
(Packet Transport Network (PTN) network management technology - Part 2: NMS system function)
|
|
YD/T 2336.3-2013
|
Technical requirements for packet transport network management. Part 3: EMS-NMS interface function
|
|
YD/T 2336.4-2013
|
Technical requirement for packet transport network management. Part 4: EMS-NMS interface common information model
|
|
YD/T 2336.5-2016
|
(Packet Transport Network (PTN) network management technology - Part 5: Based on the EMS-NMS interface information model IDL / IIOP technology)
|
|
YD/T 2336.6-2016
|
(Packet Transport Network (PTN) network management technology - Part 6: XML-based EMS-NMS interface information model)
|
|
YD/T 2337-2011
|
Photovoltaic cables for electric powers in communication system
|
|
YD/T 2338-2011
|
Telecommunication cable-foamed polyethylene dielectric, copper-clad aluminum tube inner conductor, corrugated copper tube outer conductor, 50 ohm radio frequency coaxial cable, for wireless communications
|
|
YD/T 2339.1-2011
|
Accessories for installation of radio-frequency coaxial cable. Part 1: Feeder clamps
|
|
YD/T 2339.2-2011
|
Accessories for installation of radio-frequency coaxial cable. Part 2: Grounding kits
|
|
YD/T 2340-2011
|
Passive dispersion compensators based on dispersion compensation fibre technology
|
|
YD/T 2341.1-2011
|
Field-mountable optical fiber connectors - Part 1: Mechanical type
|
|
YD/T 2341.2-2011
|
Field-mountable optical fiber connectors. Part 2: Fusion splice type
|
|
YD/T 2342-2011
|
Reliability test method for optoelectronic devices used in telecommunications
|
|
YD/T 2343-2011
|
Front terminal valve-regulated lead acid battery for telecommunications
|
|
YD/T 2344.1-2011
|
LiFePO4battery system for telecommunications. Part 1: Integrated batery system
|
|
YD/T 2344.2-2015
|
LiFePO4 battery system for telecommunications Part2: Discrete battery system
|
|
YD/T 2345-2011
|
Power terminal lugs for communications
|
|
YD/T 2346-2011
|
Technical requirements for residual current operated devices with automatic-reclosing devices for telecom uses
|
|
YD/T 2347-2011
|
Measurement methods for electromagnetic fields of household applicances and similar apparatus with regard to human exposure
|
|
YD/T 2348-2011
|
CDMA digital cellular mobile communication networks method for UICC-Terminal interface-CSIM application characteristics of terminal
|
|
YD/T 2349-2011
|
2GHz WCDMA digital cellular mobile telecommunication network. Technical requirement of RAN equipment (Phase 5). HSPA+
|