|
Std ID |
Description (Standard Title) |
|
TB/T 3229-2010
|
Mobile lighting equipment for track maintenance works
|
|
TB/T 3230-2010
|
GSM-R digital mobile communication system applications information transmission system of operation and control for locomotive synchronization
|
|
TB/T 3231-2010
|
GSM-R digital mobile communication system application service radio transmission system for railway traffic control command information
|
|
TB/T 323-1993
|
(Dg16 right angle valve)
|
|
TB/T 3232-2010
|
Technical specification of communication equipment for railway emergency center
|
|
TB/T 3233-2010
|
Measurement method for railway integrated grounding system
|
|
TB/T 3234-2010
|
Equipment standard and use principle of railroad RedCross medicine kit
|
|
TB/T 3235-2010
|
General technology condition of special geometrical measuring instrument for railway
|
|
TB/T 3236.1-2010
|
Land for railway. Part 1: Classification
|
|
TB/T 3236.2-2010
|
Land for railway. Part 2: Graphics mode
|
|
TB 10006-1999
|
Code for design of railway communication
|
|
TB/T 3238-2010
|
Specification for traction motors on board motive units
|
|
TB/T 3239-2010
|
Metallographic examination graph spectrum of widmanstatten structure in microalloying steel used for railway
|
|
TB/T 3240-2010
|
High-pressure fuel ejection pipe for diesel locomotive engine
|
|
TB/T 3241-2010
|
Mobile rail welding vehicle
|
|
TB/T 324-1993
|
(Dg20 right angle valve)
|
|
TB/T 3242-2010
|
General specification of LED light signals for railways
|
|
TB/T 3243-2010
|
Technical specification for waste discharge unit of vacuum sewerage system on railway
|
|
TB/T 3244.1-2010
|
Combined pipe clamp for rolling stock. Part 1: Technical specifications
|
|
TB/T 3244.2-2010
|
Combined pipe clamp for rolling stock. Part 2: Clamp for single pipe. Light-duty series
|
|
TB/T 3244.3-2010
|
Combined pipe clamp for rolling stock. Part 3: Clamp for single pipe—heavy-duty series
|
|
TB/T 3244.4-2010
|
Combined pipe clamp for rolling stock. Part 4: Clamp for two pipes
|
|
TB/T 3245-2010
|
Electrical heating cold-resistant device for locomotive
|
|
TB/T 3246.1-2010
|
Design guide for railway vehicles and their components. Bolted joints. Part 1: Classification of bolted joints
|
|
TB/T 3246.2-2010
|
Design guide for railway vehicles and their components. Bolted joints. Part 2: Design. Mechanical application
|
|
TB/T 3246.3-2010
|
Design guide for railway vehicles and their components. Bolted joints. Part 3: Design-Electrical application
|
|
TB/T 3246.4-2010
|
Design guide for railway vehicles and their components. Bolted joints. Part 4: Securing of bolted joints
|
|
TB/T 3246.5-2010
|
Design guide for railway vehicles and their components. Bolted joints. Part 5: Protection against corrosion
|
|
TB/T 3246.6-2010
|
Design guide for railway vehicles and their components. Bolted joints. Part 6: Connecting dimensions
|
|
TB/T 3246.7-2010
|
Design guide for railway vehicles and their components. Bolted joints. Part 7: Installation
|
|
TB/T 3247-2010
|
Technical specification of damping material sheets for rolling stock
|
|
TB/T 3248-2010
|
Mounting of electronic equipment for rolling stock
|
|
TB/T 3249-2010
|
Roof cabling for high voltage section of rolling stock
|
|
TB/T 3250-2010
|
Specifications of sealing design and test for powered car train-set
|
|
TB/T 3251.1-2010
|
Railway applications. Insulation coordination. Part 1: Basic requirements-Clearances and creepage distances for all electrical and electronic equipment
|
|
TB/T 3251.2-2010
|
Railway applications. Insulation coordination. Part 2: Overvoltages and related protection
|
|
TB/T 325-1993
|
(Dg25 right angle valve)
|
|
TB/T 3252-2010
|
Overhead conductor rail for overhead contact system in electrification railway
|
|
TB/T 3253-2010
|
Insulating protective sheath for overhead contact system in electrified railway
|
|
TB/T 3254-2011
|
Sanding device of locomotive and motor car
|
|
TB/T 3255-2011
|
Design requirments for locomotive driver desk
|
|
TB/T 3256.1-2011
|
Non-destructive testing of in-service components for locomotive. Part 1: General requirement
|
|
TB/T 3256.2-2011
|
Non-destructive testing of in-service components for locomotive. Part 2: Ultrasonic testing of tyres, rims of monobloc steel wheels
|
|
TB/T 3256.3-2011
|
Non-destructive testing of in-service components for locomotive. Part 3: Magneticle particle testing of wheelsets
|
|
TB/T 3256.4-2011
|
Non-destructive testing of in-service components for locomotive. Part 4: Magneticle particle testing of couplers and coupler yokes
|
|
TB/T 3256.5-2011
|
Non-destructive testing of in-service components for locomotive. Part 5: Magneticle particle testing of crank shafts in diesel engines
|
|
TB/T 3256.6-2011
|
Non-destructive testing of in-service components for locomotive. Part 6: Magnetic particle testing of rods, pins and shafts
|
|
TB/T 3256.7-2011
|
Non-destructive testing of in-service components for locomotive. Part 7: Magnetic particle testing of general components
|
|
TB/T 3256.8-2011
|
Non-destructive testing of in-service components for locomotive. Part 8: Dye penetrant testing of general components
|
|
TB/T 3257.8-2011
|
NDT locomotives in service parts - Part 8: General Parts coloring penetration testing
|
|
TB/T 3257-2011
|
Air compressor lubricating oil for railway locomotive
|
|
TB/T 3258-2011
|
Assembly technical specification for electric locomotive air piping
|
|
TB/T 3259-2011
|
Technical specification for welding of aluminium and aluminium alloys used on EMU
|
|
TB/T 3260.1-2011
|
Aluminium and aluminium alloys used on EMU. Part1: Basic requirement
|
|
TB/T 3260.2-2011
|
Aluminium and aluminium alloys used on EMU. Part2: Sheet and strip
|
|
TB/T 3260.3-2011
|
Aluminium and aluminium alloys used on EMU. Part3: Rod/bar and tube
|
|
TB/T 3260.4-2011
|
Aluminium and aluminium alloys used on EMU. Part4: Profiles
|
|
TB/T 3261-2011
|
Rubber hose for compressed air brake on locomotive and motor car
|
|
TB/T 326-1993
|
(Dg32 right angle valve)
|
|
TB/T 3262-2011
|
Cab doors of multiple unit trains
|
|
TB/T 3263-2011
|
Passenger seat for powered car train-set
|
|
TB/T 3264-2011
|
Driver seat for rail car
|
|
TB/T 3265-2011
|
Windshield wiper for locomotive
|
|
TB/T 3266-2011
|
General technical specifications for doors of locomotive
|
|
TB/T 3267-2011
|
Adapter on railway freight car
|
|
TB/T 3268-2011
|
Rubber metal pad for freight car load bearing saddle
|
|
TB/T 3269-2011
|
Elastic side bearings for railway freight wagons
|
|
TB/T 3270-2011
|
Center wear plate of railway freight wagons
|
|
TB/T 3271-2011
|
Railway applications. Current collection systems. Technical criteria for the interaction between pantograph and overhead line (to achieve free access)
|
|
TB/T 327-1993
|
(Dg40 right angle valve)
|
|
TB/T 3272-2011
|
Constant tension cable unrolling vehicle for overhead contact system in electrification railway
|
|
TB/T 3273-2011
|
Mast erection vehicle for overhead contact system in electrification railway
|
|
TB/T 3274-2011
|
Technical specification for the railway concrete beam accessories with multi-element co-penetration
|
|
TB/T 3275-2011
|
Concrete for railway construction
|
|
TB/T 3276-2011
|
[Including 2017XG1] Rails for high speed railway
|
|
TB/T 3277.1-2011
|
Railway magnetic thermal paper ticket. Part 1: Booking office machine
|
|
TB/T 3277.2-2011
|
Railway magnetic thermal paper ticket. Part 2: Ticket vending machine
|
|
TB/T 3277.3-2011
|
Railway magnetic thermal paper ticket. Part 3: Automatic gate
|
|
TB/T 3278-2011
|
Railway applications. Specification and demonstration of reliability, availability, maintainability and safety(RAMS). Guide to the application of GB/T 21562 for rolling stock RAM
|
|
TB/T 3279-2011
|
Components of diesel engine for locomotive and rail car Valve rotator
|
|
TB/T 3280-2011
|
Fuel tank for diesel locomotive
|
|
TB/T 3281-2011
|
Pantograph air compressor station on locomotive and power car
|
|
TB/T 328-1993
|
(Dg50 right angle valve)
|
|
TB/T 3282-2011
|
Powered car train-set application maintenance handbook guide
|
|
TB/T 3283-2015
|
Technical conditions for railway time synchronization network
|
|
TB/T 3284-2011
|
The traction link assembly of powered car train-set
|
|
TB/T 3285-2011
|
The anti-rolling torsion bar for powered car train-set
|
|
TB/T 3286-2011
|
Luggage rack and hat hook of railway car
|
|
TB/T 3287-2013
|
Cab signal systems on board
|
|
TB/T 3288-2013
|
Ballastless track tracklayer unit
|
|
TB/T 3289-2013
|
Ballasted long rail track laying vehicle
|
|
TB/T 3290-2013
|
Ballastless track gantry slab-laying machine
|
|
TB/T 3291-2013
|
Ballastless track cement emulsification bitumen mortar truck
|
|
TB/T 329-1995
|
(E-6 type distribution valve. Technical conditions)
|
|
TB/T 3292-2013
|
Special numerical control grinding machine for the CRTS Ⅱ track slab
|
|
TB/T 3293-2013
|
Overturning machine for the CRTS Ⅱ track slab
|
|
TB/T 3294-2013
|
Special vacuum demoulding machine for the CRTS Ⅱ track slab
|
|
TB/T 3295-2013
|
Vehicle for transporting box-beam of high speed railway
|
|
TB/T 3296-2013
|
Box-beam girder-erecting machine of high speed railway
|
|
TB/T 3297-2013
|
Concrete sleeper embedded in ballastless track on turnout section of high-speed railway
|