|
Std ID |
Description (Standard Title) |
|
TB/T 2951-1999
|
(Freight rail vehicles with air control valve 120 technical conditions)
|
|
TB/T 2951-2009
|
Air controlling valve of railway wagon
|
|
TB/T 2952-1999
|
Technical Requirements for SDH Transmission Equipment
|
|
TB/T 2953-1999
|
Test Method for Railway Ground Signal Product at High and Low Temperature
|
|
TB/T 2953-2015
|
High and low temperature testing methods for parts of railway signaling
|
|
TB/T 2954-1999
|
Identification Method for Radioactive Substance of Railway Transportation
|
|
TB/T 2955-1999
|
Lubricating Grease for Rolling Bearings of Railway Rolling Stock Wheel
|
|
TB/T 2956-1999
|
(Locomotive single-stage and multi-stage four-generation diesel engine oil)
|
|
TB/T 2956-2009
|
Diesel engine oils for railway diesel locomotives
|
|
TB/T 2957-1999
|
Diesel Locomotive Hydraulic Transmission Oil
|
|
TB/T 2958-1999
|
Plain Bearings; Thin-walled Half-bearings; Checking of Peripheral Length
|
|
TB/T 2959-1999
|
Plain Bearings; Metallic Multilayer Plain Bearings; Non-destructive Ultrasonic Testing of Bond
|
|
TB/T 2960-1999
|
Steel and Steel Products - Location and Preparation of Test Pieces for Mechanical Testing
|
|
TB/T 2961-1999
|
(Locomotive cab seat)
|
|
TB/T 2962-1999
|
Technical Requirements for Control Device of Diesel Locomotive, Rail Car and Diesel Rail Motor Car Group
|
|
TB/T 2962-2015
|
Operating devices specification of diesel locomotive
|
|
TB/T 2963-1999
|
(Traction power unit marks and symbols)
|
|
TB/T 2963-2013
|
Motive power units-Inscriptions, marks and signs
|
|
TB/T 2964.1-1999
|
(Locomotive diesel filter filter life test methods)
|
|
TB/T 2964.2-1999
|
(Locomotive diesel filter cartridge efficiency test method. Gravimetric method)
|
|
TB/T 2964.3-1999
|
(Locomotive diesel filter cartridge pressure testing methods)
|
|
TB/T 2964.4-1999
|
(Locomotive diesel filter cartridge cleanliness test methods)
|
|
TB/T 2964-1999
|
(Locomotive diesel filter filter life test methods)
|
|
TB/T 2965-1999
|
(Railway concrete bridge deck waterproofing layer TQF-I Technical conditions)
|
|
TB/T 2965-2011
|
Technical specification for waterproof layer of railway concrete bridge
|
|
TB/T 2966-1999
|
Basic Requirements for Classification and Code of Railway Transportation Equipment
|
|
TB/T 2967.1-2002
|
Quality standards of railway transport passengers service - Part 1: station
|
|
TB/T 2967.2-2002
|
Quality standards of railway transport passengers service - Part 2: train
|
|
TB/T 2968-1999
|
Standard for Service Quality of Railway Transportation
|
|
TB/T 2969-1999
|
Technical Requirements for Automatic Control or Alarm at Level Crossing
|
|
TB/T 2970-1999
|
General Requirements of Railway Light Annunciator
|
|
TB/T 2971-2000
|
The railway baggage, parcels accident code
|
|
TB/T 2972-1999
|
Technical Specifications for Speed Measuring Radar with Hump Millimeter Wave
|
|
TB/T 2973-2000
|
(End of Train Device (ETD) general technical conditions)
|
|
TB/T 2973-2006
|
End-of-train safety equipment and accessories
|
|
TB/T 2974-2000
|
International railway transport of export goods transport packaging quality requirements
|
|
TB/T 2975-2000
|
Glued insulated rail technology conditions
|
|
TB/T 2975-2010
|
Specification for bonded insulated rail joints used on railway
|
|
TB/T 2976-2000
|
(Bogie classification and technical performance requirements)
|
|
TB/T 2977-2000
|
Ground protection of the metal parts of the railway vehicles
|
|
TB/T 2977-2016
|
Ground protection of the metal parts of railway vehicle
|
|
TB/T 2978-2000
|
Railway Wagon the vertical wheel geared hands brake conditions
|
|
TB/T 2978-2016
|
Hand brakes of railway freight car
|
|
TB/T 2979-2000
|
Railway truck brake pipe resistance test
|
|
TB/T 2980-2000
|
Technical condition of the passenger car brake disc
|
|
TB/T 2980-2014
|
Brake disc rolling stock
|
|
TB/T 2981-2000
|
Combustion of materials from the determination of the highest heat value
|
|
TB/T 2982-2000
|
Of No. 13 factory repair template
|
|
TB 10003-2005
|
Code for design on tunnel of railway
|
|
TB/T 2984-2000
|
Plain bearings. Metallic multilayer plain bearings penetrate non-destructive testing
|
|
TB/T 2985-2000
|
Metallic materials dynamic tear test method
|
|
TB/T 2986-2000
|
Railway locomotive traction motor suspension suspension bearing oil
|
|
TB/T 2987.1-2000
|
Internal combustion, electric locomotive traction motor suspension bearing copper back alloy chemical analysis method
|
|
TB/T 2987.2-2000
|
Internal combustion, electric locomotive traction motor suspension bearing bearing alloy chemical analysis method
|
|
TB/T 2988-2000
|
Railway rolling stock components impact test method
|
|
TB/T 2989-2000
|
Technical delivery conditions for rolling stock gear
|
|
TB/T 2989-2015
|
Gear for railway locomotive and power car
|
|
TB/T 2990-2000
|
Locomotives, traction motor suspension and wheel drive system and its recommended range
|
|
TB/T 2991-2000
|
The locomotives air conditioning unit test methods
|
|
TB/T 2992-2000
|
Interval crossing signal equipment fault monitoring and technical conditions
|
|
TB/T 2993.1-2000
|
Railway station with AC power distribution equipment
|
|
TB/T 2993.1-2016
|
Railway communication power supply. Part 1: General requirements of power supply system for communication
|
|
TB/T 2993.2-2000
|
Railway station-48V DC power distribution equipment
|
|
TB/T 2993.2-2016
|
Railway communication power supply. Part 2: High frequency switch-mode power supply for communication
|
|
TB/T 2993.3-2000
|
Railway station-48V high-frequency switching rectifier equipment
|
|
TB/T 2993.3-2016
|
Railway communication power supply. Part 3: Uninterruptible power supply equipment for communication
|
|
TB/T 2993.4-2016
|
Railway communication power supply. Part 4: High frequency switching rectifier equipment for communication
|
|
TB/T 2993.5-2016
|
Railway communication power supply. Part 5: Alternating current distribution
|
|
TB/T 2993.6-2016
|
Railway communication power supply equipment. Part 6: Direct current distribution
|
|
TB/T 2994-2000
|
(Technical requirements for diesel locomotive fuel filter element)
|
|
TB 10003-2016
|
Code for design of railway tunnel
|
|
TB/T 2996-2000
|
Technical requirements and test method for digital concentrated telephone units
|
|
TB/T 2997.1-2000
|
Railway programmed collinear telephone equipment master the technical requirements and test methods
|
|
TB/T 2997.2-2000
|
Railway programmed collinear the telephone equipment collinear phone technical requirements and test methods
|
|
TB/T 2997.3-2000
|
Railway programmed telephone equipment collinear tandem technical requirements and test methods
|
|
TB/T 2998-2000
|
450MHz independent synchronous half-duplex the train radio dispatching equipment
|
|
TB/T 2999.1-2000
|
ZP · Y1-18 Frequency Shift Automatic Block Device
|
|
TB/T 2999.2-2000
|
ZP · Y2-18 Frequency Shift Automatic Block Device
|
|
TB/T 2999.3-2005
|
ZPR·Y2-18 Type Frequency-shift Automatic blocking system
|
|
TB/T 3000-2000
|
The hot test methods rolling stock axle box bearings in the axlebox testing machine
|
|
TB/T 3001-2000
|
(Railway vehicles with electronic converters fed alternating current motors)
|
|
TB/T 3002-2000
|
DC pulsating current traction motor load test bench conditions
|
|
TB/T 3003-2001
|
Railway Passenger ball core truncated cock
|
|
TB/T 3003-2013
|
Cut-out cock for locomotive and rolling stock
|
|
TB/T 3004-2001
|
UM71 track circuit Automatic Block Device
|
|
TB/T 3005-2001
|
(Locomotive brake shoe PM)
|
|
TB/T 3005-2008
|
Power metallurgy brake shoes for locomotive
|
|
TB/T 3006-2000
|
Monitoring and technical requirements of railway environmental protection index evaluation and assessment
|
|
TB/T 3007-2000
|
Railway back to the water quality standards
|
|
TB/T 3008-2002
|
Hygienic Standard for Station and Vehicle of Transporting Food in Railway
|
|
TB/T 3009-2001
|
The bus brake anti-skid systems technologies conditions
|
|
TB/T 3009-2011
|
Anti-skid device for railway passenger car and powered car train-set
|
|
TB/T 3010-2001
|
Railway vehicles rolling bearing carbon chromium bearing steel ordering technology
|
|
TB/T 3011-2001
|
Railway generic trucks got the idea to disk fatigue test and evaluation methods
|
|
TB/T 3012-2001
|
(Bolster steel railway wagon side frame procurement and acceptance of technical conditions)
|
|
TB/T 3012-2006
|
Specification of cast steel bolster and side frame for railway freight car
|
|
TB/T 3012-2016
|
Cast steel bolster and side frame for railway freight car
|
|
TB/T 3013-2001
|
Technical conditions of synthetic materials coupler bodies wear plate
|
|
TB/T 3014-2001
|
Railway alloy steel forgings
|
|
TB/T 3015.1-2001
|
The overall railway vehicle wheels Dimensions inspection gages conditions. Rolling circle diameter caliper
|