|
Std ID |
Description (Standard Title) |
|
TB/T 1552-1984
|
(Vehicle hydraulic transmission retarder technical conditions)
|
|
TB/T 1555-1984
|
(Hump special pneumatic system technical conditions)
|
|
TB/T 1555-2005
|
The technical specification of hump yard special pneumatic system
|
|
TB/T 1556-1984
|
(Hump Cab Signal technical conditions)
|
|
TB/T 1557-1984
|
(Hump route control technology conditions)
|
|
TB/T 1558.1-2010
|
Non-destructive testing of welding for rolling stock. Part 2: General principles
|
|
TB/T 1558.2-2010
|
Non-destructive testing of welding for rolling stock. Part 2: Ultrasonic testing
|
|
TB/T 1558.3-2010
|
Non-destructive testing of welding for rolling stock. Part 3: Radiographic testing
|
|
TB/T 1558.4-2010
|
Non-destructive testing of welding for rolling stock. Part 4: Magnetic particle testing
|
|
TB/T 1558.5-2010
|
Non-destructive testing of welding for rolling stock. Part 5: Penetrant testing
|
|
TB/T 1558-1984
|
(Butt weld ultrasonic testing)
|
|
TB/T 1561-1985
|
(BX1-34 Signal Transformer)
|
|
TB/T 1562-1985
|
(WD-type turnout grip)
|
|
TB/T 1563-1985
|
(WX-type signal grip)
|
|
TB/T 1564-1985
|
(BD-type turnout, said device)
|
|
TB/T 1565-1985
|
(DG-type catheter guide wheel)
|
|
TB/T 1566-1985
|
(TG-type catheter regulator)
|
|
TB/T 1567-1990
|
Technical Specification for Railway Automatic Blocking
|
|
TB/T 1568-1991
|
(120kW railcar technical conditions)
|
|
TB/T 1569.1-1995
|
(Railway rolling stock on the hammer forgings mechanical allowances and limit deviations General requirements)
|
|
TB/T 1569.2-1995
|
(Railway rolling stock on the hammer forgings mechanical allowances and limit deviations. Stepped shaft)
|
|
TB/T 1569.3-1995
|
(Railway rolling stock on the hammer forgings mechanical allowances and limit deviations. Disc type)
|
|
TB/T 1569.4-1995
|
(Railway rolling stock on the hammer forgings mechanical allowances and limit deviations. Perforated disc category)
|
|
TB/T 1569.5-1995
|
(Railway rolling stock on the hammer forgings mechanical allowances and limit deviations sleeve type)
|
|
TB/T 1569.6-1995
|
(Railway rolling stock on the hammer forgings mechanical allowances and limit deviations. Ring category)
|
|
TB/T 1569.7-1995
|
(Railway rolling stock on the hammer forgings mechanical allowances and limit deviations. Axis class)
|
|
TB/T 1569.8-1995
|
(Railway rolling stock on the hammer forgings mechanical allowances and limit deviations. Black forgings)
|
|
TB/T 1577-1985
|
(DZB-arm board controlled lights)
|
|
TB/T 1578-1998
|
Hydraulic Road General technical conditions
|
|
TB/T 1580-1995
|
Technical Specification for Welding of New Built Locomotive
|
|
TB/T 1581-1996
|
Technical Specification for Locomotive Repair and Welding
|
|
TB/T 1582-1995
|
(Rolling stock of carbon dioxide gas shielded arc welding technical conditions)
|
|
TB/T 1583-1996
|
(Repair welding of steel castings locomotives technical conditions)
|
|
TB/T 1588-1985
|
(Railway Science and Technology archives classification numbering)
|
|
TB/T 1588-2005
|
Classification and Code For Railway Science and Technology Archives
|
|
TB/T 1591-1985
|
Regulation of Arrangement, Type and Steering Direction for Main Control Devices of Diesel Locomotive and Diesel Rail Motor Car
|
|
TB/T 1593-1985
|
(M25, M35, M50 series universal shaft type size)
|
|
TB/T 1594-1996
|
Draw Gear of Diesel and Electric Locomotives (Upward Action)
|
|
TB/T 1595-1996
|
Draw Gear of Diesel and Electric Locomotives (Downward Action)
|
|
TB/T 1596-1996
|
Front Follower used for Draw Gear of Diesel and Electric Locomotive
|
|
TB/T 1597-1985
|
(Railway enterprises comprehensive energy consumption calculation method)
|
|
TB/T 1606-1985
|
(Ductile iron crankshaft ultrasonic testing)
|
|
TB/T 1607-1985
|
(Chinese Industry Standard)
|
|
TB/T 1607-1991
|
Technical Specification for Locomotive Turntable
|
|
TB/T 1608.1-2013
|
Auxiliary motors for locomotive. Part 1: Asynchronous motor
|
|
TB/T 1608.2-2013
|
Auxiliary motors for locomotive. Part 2: Phase splitter
|
|
TB/T 1608-1985
|
(Chinese Industry Standard)
|
|
TB/T 1608-2001
|
Three-phase asynchronous motors for locomotives and rolling stock, basic technical conditions
|
|
TB/T 1611-1985
|
(Truck air brake pipe system design parameters)
|
|
TB/T 1612-1985
|
(Freight Car Coupler buffer device design parameters)
|
|
TB/T 1613-1985
|
Design Parameter of Truck Hand Braking Device Design
|
|
TB/T 1617-1985
|
General Technical Conditions for Heat Treatment
|
|
TB 10002.2-1999
|
Code for design on steel structure of railway bridge
|
|
TB/T 1619-1998
|
(Magnetic particle inspection axle locomotives)
|
|
TB 10002.2-2005
|
Code for design on steel structure of railway bridge
|
|
TB/T 1620-1985
|
(Arm Lock interlocking board technical conditions)
|
|
TB/T 1621-1985
|
(Color light electric locks interlocking technical conditions)
|
|
TB/T 1622-1985
|
(TD1-type snap-in console)
|
|
TB/T 1623-1985
|
(TD3 type snap-in console)
|
|
TB/T 1626-1985
|
Dimensional Tolerance for Plastic Workpiece of Communication Signal
|
|
TB/T 1630-1985
|
(Electrified section 150/450MHz train radio communication available to receive a minimum level of value and measurement methods)
|
|
TB/T 1631-1985
|
(Chinese Industry Standard)
|
|
TB/T 1631-2002
|
The rail arc welding complement the technical conditions
|
|
TB/T 163-1999
|
(Consumable rapid measurement of molten metal temperature thermocouples)
|
|
TB/T 1632.1-2005
|
The rail welding - Part 1: General technical conditions
|
|
TB/T 1632.1-2014
|
Welding of rails Part 1: General
|
|
TB/T 1632.2-1997
|
(Rail welding fittings. Heat-treated rail)
|
|
TB/T 1632.2-2005
|
The rail welding - Part 2: The flash welding
|
|
TB/T 1632.2-2014
|
Welding of rails. Part 2: Flash butt welding
|
|
TB/T 1632.3-2005
|
The rail welding - Part 3: thermite welding
|
|
TB/T 1632.3-2014
|
Welding of rails - Part 3: Thermit welding
|
|
TB/T 1632.4-2005
|
The Rail Welding Part 4: Pressure welding
|
|
TB/T 1632.4-2014
|
Welding of rails - Part 4: Gas pressure welding
|
|
TB/T 1632-1991
|
(Rail welded joint technical conditions)
|
|
TB/T 1651-1996
|
Calculation Condition and Method for Transformer Capacity of Traction Substation
|
|
TB/T 1652-1996
|
Calculation Condition and Method for Voltage Loss of Traction Power Supply System
|
|
TB/T 1653-1996
|
Calculation Condition and Method for Electric Loss of Traction Power Supply System
|
|
TB/T 1656-1985
|
(Locomotive crew medical professional visual function method)
|
|
TB/T 1659-1985
|
Ultrasonic Test for Bimetal Bearing Bush of Aluminum Base Alloy on Steel Backing of Diesel Engine of Diesel Locomotive
|
|
TB/T 1661-1991
|
High Phosphor Brake Shoe for Rolling Stock
|
|
TB/T 1662-1985
|
(Chinese Industry Standard)
|
|
TB/T 1662-2001
|
Diesel locomotive with oil hose
|
|
TB/T 1662-2013
|
Joint for diesel locomotive
|
|
TB/T 1666-1985
|
(Two truck axle bogie design parameters)
|
|
TB/T 1667-1985
|
Design Parameters for Covered Wagon
|
|
TB/T 1668-1985
|
Design Parameters for Coal Hopper Car
|
|
TB/T 1669-1985
|
(Chinese Industry Standard)
|
|
TB/T 1669-2004
|
Gauge for No.13 coupler
|
|
TB/T 1670.10-1985
|
(Leptospira ears up and down on the 15th coupler workload regulation)
|
|
TB/T 1670.11-1985
|
(15 Coupler tongue traction surface model)
|
|
TB/T 1670.1-1985
|
(15-bit coupler latch opening size work model)
|
|
TB/T 1670.12-1985
|
(15 Coupler sublingual traction surface model)
|
|
TB/T 1670.13-1985
|
(15 coupler knuckle end ear from working model)
|
|
TB/T 1670.14-1985
|
(15 coupler knuckle cross-sectional model)
|
|
TB/T 1670.15-1985
|
(15 coupler push iron shape model)
|
|
TB/T 1670.16-1985
|
(On the 15th working prototype coupler push iron thickness)
|
|
TB/T 1670.17-1985
|
(Coupler lock iron on the 15th working model size 65. 70)
|
|
TB/T 1670.18-1985
|
(15 Iron Tail coupler lock model)
|
|
TB/T 1670.19-1985
|
(Coupler lock slot on the 15th of iron regulatory workload)
|
|
TB/T 1670.20-1985
|
(15 Integrated coupler lock mention 23, 24. 5 size model)
|