|
Std ID |
Description (Standard Title) |
|
SY/T 0511.9-2010
|
Oil tank appurtenances. Part 9: Dip hatch
|
|
SY/T 0511-1996
|
(Oil tank breather valve)
|
|
SY/T 0512-1996
|
(Oil storage tank flame arrester)
|
|
SY/T 0515-1997
|
Specification for oil and gas separators
|
|
SY/T 0515-2007
|
Specification for oil and gas separators
|
|
SY/T 0515-2014
|
Specification for oil and gas separators
|
|
SY/T 0516-1997
|
Technical code for insulating flange design
|
|
SY/T 0516-2008
|
Technical code for insulating joint and insulating flange
|
|
SY/T 0516-2016
|
Technical code for insulating joint and insulating flange
|
|
SY/T 0518-1992
|
(Oil and gas pipeline steel pipe fittings design requirements)
|
|
SY/T 0518-2002
|
Specification for design of steel buttwelding fittings for oil and gas pipeline
|
|
SY/T 0519-1993
|
(Crude yield value determined. U-tube method)
|
|
SY/T 0520-1993
|
(Crude oil viscosity measurement. Rotational viscometer balance method)
|
|
SY/T 0520-2008
|
Viscosity determination of crude petroleum. Equilibrium method by rotational viscometer
|
|
SY/T 0521-1993
|
(Determination of wax precipitation point. Microscopic observation method)
|
|
SY/T 0521-2008
|
Determination of wax appearance temperature in crude petroleum. Test method by microscopic observation
|
|
SY/T 0522-1993
|
(Determination of wax precipitation point rotary viscometer)
|
|
SY/T 0522-2008
|
Determination of wax appearance temperature in crude petroleum. Test method by rotational viscometer
|
|
SY/T 0523-1993
|
(Oilfield Water Filters)
|
|
SY/T 0523-2008
|
Oilfield water treatment filter
|
|
SY/T 0524-1993
|
(HTM indirect heating device technology)
|
|
SY/T 0524-2008
|
Code for heater system with heat-transfer oil
|
|
SY/T 0524-2016
|
Code for heater system with heat-transfer oil
|
|
SY/T 0525.1-1993
|
(Hydraulic oil tank valve)
|
|
SY/T 0525.2-1993
|
Rotary joint of petroleum tank
|
|
SY/T 0525.3-1993
|
(Oil Tank air bubble generator)
|
|
SY/T 0525.4-1993
|
(Oil Tank Steel Hole Accessories)
|
|
SY/T 0525.5-1993
|
(Hole of oil storage tanks)
|
|
SY/T 0526.10-1993
|
Coal tar enamel coating - Enamel - Determination of water absorption rate
|
|
SY/T 0526.11-1993
|
Coal tar enamel coating- Enamel - Determination of ash
|
|
SY/T 0526.1-1993
|
Coal tar enamel coating - base coat - Determination for ash of dry extract
|
|
SY/T 0526.12-1993
|
Coal tar enamel coating - Enamel - Test for low-temperature brittle crack and peeling
|
|
SY/T 0526.13-1993
|
Coal tar enamel coating - Enamel - Impact test
|
|
SY/T 0526.14-1993
|
Coal tar enamel coating - Enamel - Cathodic disbonding test
|
|
SY/T 0526.15-1993
|
Coal tar enamel coating - Take-up strap - determination for tensile strength
|
|
SY/T 0526.16-1993
|
Coal tar enamel coating - Take-up strap - Test for water resistance
|
|
SY/T 0526.17-1993
|
Coal tar enamel coating - Take-up strap - Test for thermal stability
|
|
SY/T 0526.18-1993
|
Coal tar enamel coating - Take-up strap - Test for flexibility
|
|
SY/T 0526.19-1993
|
Coal tar enamel coating - Take-up strap - Determination of mass per unit area
|
|
SY/T 0526.20-1993
|
Coal tar enamel coating - Take-up strap - Determination for thickness
|
|
SY/T 0526.21-1993
|
Coal tar enamel coating - thermal winding tape - Enamel sampling
|
|
SY/T 0526.2-1993
|
Coal tar Enamel coating - Enamel - Sample preparation
|
|
SY/T 0526.22-1993
|
Coal tar Enamel coating - Thermal winding tape - Bonding test
|
|
SY/T 0526.3-1993
|
Coal tar Enamel coating - Enamel - Determination for penetration
|
|
SY/T 0526.4-1993
|
Coal tar Enamel coating - Enamel - Cold bend test
|
|
SY/T 0526.5-1993
|
Coal tar Enamel coating - Enamel - Determination for indentation
|
|
SY/T 0526.6-1993
|
Coal tar Enamel coating - Enamel - Determination for liquidity (ISO Method)
|
|
SY/T 0526.7-1993
|
Coal tar Enamel coating - Enamel - Determination for liquidity (BS method)
|
|
SY/T 0526.8-1993
|
Coal tar Enamel coating - Enamel - Test for bonding compatibility
|
|
SY/T 0526.9-1993
|
Coal tar enamel coating - Enamel - Test for heating change
|
|
SY/T 0527-1993
|
(Composition of crude oil family. HPLC)
|
|
SY/T 0528-1993
|
(Trace arsenic in crude oil assay atomic absorption spectrometry)
|
|
SY/T 0528-2008
|
Determination of arsenic in crude petroleum. Atomic fluorescence spectrometry
|
|
SY/T 0529-1993
|
Component analysis for C1~C12 in oil field gas - Relevant unification - Gas chromatography method
|
|
SY/T 0530-1993
|
(Oilfield wastewater Determination of oil content. Spectrophotometry)
|
|
SY/T 0530-2011
|
Determination of oil content in oilfield produced water. Spectrophotometry method
|
|
SY/T 0531-1994
|
(Injected water particles suspended assay. Resistance induction method)
|
|
SY/T 0531-2012
|
Determination of particle size of suspended solid in oilfield injecting wate. Resistance induction method
|
|
SY/T 0532-1993
|
(Oilfield water injection bacterial analysis. Extinct dilution)
|
|
SY/T 0532-2012
|
Analysis method of the bacteria for oilfield injecting water. Disappearing dilution method
|
|
SY/T 0536-1994
|
(Chinese Industry Standard)
|
|
SY/T 0536-2008
|
Determination of salt content in crude petroleum. Coulometric titration method
|
|
SY/T 0537-1994
|
(Determination of wax content of crude oil)
|
|
SY/T 0537-2008
|
The test method of wax content in crude oil
|
|
SY/T 0538-1994
|
(Tube furnace technical conditions)
|
|
SY/T 0538-2004
|
Tube furnace specification
|
|
SY/T 0538-2012
|
Specification for tubular heater
|
|
SY/T 0539-1994
|
Specification for tubular heater
|
|
SY/T 0540-1994
|
(Furnace oil industry types and basic parameters)
|
|
SY/T 0540-2006
|
Type and basal parameters of heaters for petroleum industry
|
|
SY/T 0540-2013
|
Type and basal parameters for heater used in petroleum industry
|
|
SY/T 0541-1994
|
(Pour point crude oil assay)
|
|
SY/T 0541-2009
|
Test method for gel point of crude oils
|
|
SY/T 0542-1994
|
(Stable light hydrocarbon component analysis by gas chromatography)
|
|
SY/T 0542-2008
|
Components of natural gasoline analysis. Gas chromatography method
|
|
SY/T 0543-1994
|
(Stable light hydrocarbon sampling methods)
|
|
SY/T 0543-2009
|
Sampling method of natureal gasoline
|
|
SY/T 0544-1995
|
Specification of internal coating for petroleum drill pipes
|
|
SY/T 0544-2004
|
Specification of internal coating for drill pipe
|
|
SY/T 0544-2010
|
Specification of internal coating for drill pipe
|
|
SY/T 0544-2016
|
Specification of internal coating for petrolenm drill pipes
|
|
SY/T 0545-1995
|
(Determination of the thermal properties of wax precipitation parameters Differential scanning calorimetry)
|
|
SY/T 0545-2012
|
Determination of thermal property parameters of the wax precipitation in crude oil. Test method by differential scanning calorimetry
|
|
SY/T 0546-1996
|
Collection and identification of corrosion products
|
|
SY/T 0546-2016
|
(Technical specification for collection and identification of corrosion products)
|
|
SY/T 0556-1999
|
Quick opening closure
|
|
SY/T 0556-2010
|
Technical code for quick opening closure
|
|
SY/T 0599-1997
|
Sulfide stress cracking resistant metallic material requirements for gas surface equipment
|
|
SY/T 0599-2006
|
Metallic material requirements on resistance to sulfide stress cracking and stress corrosion cracking for natural gas surface equipment
|
|
SY/T 0600-1997
|
Predication of scaling tendency in oil-field water
|
|
SY/T 0600-2009
|
Prediction of scaling tendency in oil-field water
|
|
SY/T 0600-2016
|
Prediction methods for scaling tendency in oil-field water
|
|
SY/T 0601-1997
|
Determination of emulsified oil and oil-soluble in water
|
|
SY/T 0601-2009
|
Determination of emulsified oil and soluble oil in water
|
|
SY/T 0601-2016
|
Determination of emulsified oil and soluble oil in produced water
|
|
SY/T 0602-2005
|
Specification for glycol-type gas dehydration units
|
|
SY/T 0603-2005
|
Specification for fiberglass reinforced plastic tanks
|
|
SY/T 0604-2005
|
Specification for shop welded tanks for storage of production liquids
|
|
SY/T 0605-2005
|
Code for surface engineering design of gas condensate filed
|
|
SY/T 0605-2008
|
Code for surface engineering design of gas condensate field
|