|
Std ID |
Description (Standard Title) |
|
JB/T 3411.7-1999
|
Squarel holder for 45-degree internal turning. Dimensions
|
|
JB/T 3411.72-1999
|
Wedge for taper shank with tang. Dimensions
|
|
JB/T 3411.73-1999
|
Extension rod of drill chuck. Dimensions
|
|
JB/T 3411.74-1999
|
Extension rod of parallel shank drill. Dimensions
|
|
JB/T 3411.75-1999
|
Mose taper shank extension rod for tap. Dimensions
|
|
JB/T 3411.76-1999
|
Parallel shank extension rod for tap. Dimensions
|
|
JB/T 3411.77-1999
|
Arbor for tip type countersink drill. Dimensions
|
|
JB/T 3411.78-1999
|
Arbor for reverse countersink drill. Dimensions
|
|
JB/T 3411.79-1999
|
Quick change bush for taper shank tool. Dimensions
|
|
JB/T 3411.80-1999
|
Quick change bush for tape. Dimensions
|
|
JB/T 3411.81-1999
|
Safe chuck for tap. Dimensions
|
|
JB/T 3411.8-1999
|
Round holder for 90-degree internal turning. Dimensions
|
|
JB/T 3411.82-1999
|
Holder for safe chuck of tap. Dimensions
|
|
JB/T 3411.83-1999
|
Taper shank arbor for 90-degreeboring tool. Dimensions
|
|
JB/T 3411.84-1999
|
Taper shank axial fasten 90-degreeboring tool arbor. Dimensions
|
|
JB/T 3411.85-1999
|
Taper shank 45-degreeboring tool arbor. Dimensions
|
|
JB/T 3411.86-1999
|
Taper shank 60-degree boring tool arbor. Dimensions
|
|
JB/T 3411.87-1999
|
Taper shank arbor for boring tool and reamer with holddown open. Dimensions
|
|
JB/T 3411.88-1999
|
Taper shank arbor for boring tool and reamer for working blind hole with holddown open. Dimensions
|
|
JB/T 3411.89-1999
|
Taper shank arbor for boring tool and reamer. Dimensions
|
|
JB/T 3411.90-1999
|
Taper screw for centring. Dimensions
|
|
JB/T 3411.91-1999
|
Taper shank adjustable boring tool holder. Dimensions
|
|
JB/T 3411.9-1999
|
Round holder for 45-degree internal turning. Dimensions
|
|
JB/T 3411.92-1999
|
7: 24 taper shank adjustable boring tool holder. Dimensions
|
|
JB/T 3411.93-1999
|
Changeable taper shank type adjustable boring tool holder. Dimensions
|
|
JB/T 3411.94-1999
|
Floating extension rod. Dimensions
|
|
JB/T 3411.95-1999
|
Changing diameter extension rod. Dimensions
|
|
JB/T 3411.96-1999
|
Arbor for slot boring. Dimensions
|
|
JB/T 3411.97-1999
|
Arbor of end mill for boring machines. Dimensions
|
|
JB/T 3411.98-1999
|
Support for radial boring tool holder. Dimensions
|
|
JB/T 3411.99-1999
|
Radial boring tool holder in support. Dimensions
|
|
JB/T 3489-1991
|
(Quick change chuck)
|
|
JB/T 3489-2007
|
Quick change chucks
|
|
JB/T 3548-1991
|
R12, R22, R502 thermostatic expansion valve for cooling
|
|
JB/T 3548-2013
|
Thermostatic refrigerant expansion valves
|
|
JB/T 3550.1-1999
|
(Cylinder boring. Parameters)
|
|
JB/T 3550.2-1999
|
(Cylinder boring. Accuracy Test)
|
|
JB/T 3550.3-1999
|
(Cylinder boring technical conditions)
|
|
JB/T 3550.4-1999
|
(Cylinder boring spindle ends)
|
|
JB/T 3555.1-1999
|
Woodworking bank saw and carriage Precision
|
|
JB/T 3555-1993
|
Woodworking bank saw and carriage Technical conditions
|
|
JB/T 3556-1999
|
Combined machine tool Rotary workbench Accuracy inspection
|
|
JB/T 3556-2011
|
Modular machine tools. Rotating table. Testing of the accuracy
|
|
JB/T 3564-1992
|
(Centrifugal long axis deep well pump. Types and basic parameters)
|
|
JB/T 3564-2006
|
Borehole shaft driven centrifugal pump. Types and basic parameters
|
|
JB/T 3565-1992
|
(Centrifugal long axis deep well pump. Efficiency)
|
|
JB/T 3565-2006
|
Borehole shaft driven centrifugal pump. Efficiency
|
|
JB/T 3566.1-1999
|
Circulating material ropeway. Rollers. Specifications
|
|
JB/T 3566.2-1999
|
Circulating material ropeway. Drive. Specifications
|
|
JB/T 3566.3-1999
|
Circulating material ropeway. Sheave. Specifications
|
|
JB/T 3566.4-1999
|
Circulating material ropeway. Tension derice of hauling rope. Specifications
|
|
JB/T 3566.5-1999
|
Mono-cable circulating material ropeway. Cars. Specifications
|
|
JB/T 3567-1999
|
The method of radio interference tension high voltage insulators
|
|
JB/T 3568-1999
|
Thermal-mechanical performance test on string insulator units
|
|
JB/T 3573-1993
|
(Measurement and evaluation method of rolling bearing radial clearance)
|
|
JB/T 3573-2004
|
Rolling bearings-Methods for the measurement of radial internal clearance
|
|
JB/T 3574-1992
|
(Chinese Industry Standard)
|
|
JB/T 3574-1997
|
Sings of rolling bearing products
|
|
JB/T 3576-1999
|
General specifications for rust-preventing of rock-drilling machines and pneumatc tools
|
|
JB/T 3576-2010
|
General specification for rust-preventing of rock drilling machines and pneumatic tools
|
|
JB/T 3578-1991
|
(Sliding rail epoxy coating material. Technology General)
|
|
JB/T 3578-2007
|
General technical rules for epoxy coating material on sliding lead-rail
|
|
JB/T 3579-1991
|
(Epoxy coated slide rail. General technical requirements)
|
|
JB/T 3579-2007
|
General specification rules for epoxy coating sliding lead-rail
|
|
JB/T 3580-1998
|
Rotary center
|
|
JB/T 3580-2011
|
Live center
|
|
JB/T 3581-1999
|
Automatic spring coiling machine Technical conditions
|
|
JB/T 3581-2017
|
Spring coiling machine. Specifications
|
|
JB/T 3582-1999
|
Hydraulic die hammers with slightly movable anvil block Basic parameters
|
|
JB/T 3583-1992
|
(Diamond grinding tablets)
|
|
JB/T 3583-2006
|
Superabrasive products. Diamond finishing pellets
|
|
JB/T 3584-1999
|
Super-hard abrasive Method for determining bulk density
|
|
JB/T 3584-2012
|
Superabrasive. Testing method of bulk density
|
|
JB/T 3585.1-1996
|
Inductive synchronizer Terminologies
|
|
JB/T 3585.1-2013
|
Inductive synchronizer. Part 1: Terms
|
|
JB/T 3585.2-1996
|
Inductive synchronizer Types and basic dimensions
|
|
JB/T 3585.2-2013
|
Inductive synchronizer. Part 2: Model and basic size
|
|
JB/T 3586-1996
|
Rotary inductive synchronizer Basic parameters and technical requirements
|
|
JB/T 3586-2013
|
Basic parameter and technical requirements for angular displacement inductive synchronizer
|
|
JB/T 3587-1996
|
Standard type and narrow type linear inductive synchronizer Basic parameters and technical requirements
|
|
JB/T 3587-2013
|
Basic parameter and technical requirements for standard linear and linear displacement inductive synchronizer
|
|
JB/T 3588-1994
|
(Rolling bearings full complement needle roller bearing dimensions and tolerances)
|
|
JB/T 3588-2007
|
Rolling bearings. Full complement needle roller bearings. Boundary dimensions and tolerances
|
|
JB/T 3589-1991
|
Automatic cold working machine Precision
|
|
JB/T 3590-1991
|
Automatic trimming machine Precision
|
|
JB/T 3591-1991
|
Automatic thread rolling machine Precision
|
|
JB/T 3592.1-1999
|
Steel ball automatic cold header Basic parameters
|
|
JB/T 3592.1-2014
|
Ba11 automatic cold header. Part 1: Basic parameter
|
|
JB/T 3592-1993
|
Steel ball, roller automatic cold header Precision
|
|
JB/T 3593-1999
|
Heat treated sintered iron-based structural materials
|
|
JB/T 3595-1993
|
(Power Station Valve technical conditions)
|
|
JB/T 3595-2002
|
Valves for power station. General requirements
|
|
JB/T 3596-1984
|
(Chinese Industry Standard)
|
|
JB/T 3596-2001
|
Performance test code for water jet air ejectors
|
|
JB/T 3623-1984
|
Metal forming machine Method for measuring noise
|
|
JB/T 3624-1999
|
Combined clamps Basic terminologies
|
|
JB/T 3625-1999
|
Combined clamp elements Technical conditions for rust prevention packing
|
|
JB/T 3626-1999
|
Combined clamps Assembling rules
|
|
JB/T 3627.10-1999
|
Tools, auxiliary tools for assembling combined clamps inspection bar for hollow clamps for boring holes
|
|
JB/T 3627.11-1999
|
Tools, auxiliary tools for assembling combined clamps Connection trays
|