|
Std ID |
Description (Standard Title) |
|
JB/T 12665-2016
|
Vacuum insulated cryogenic pipe
|
|
JB/T 12666-2016
|
(Lead-acid battery technology from disabling conditions)
|
|
JB/T 12667.1-2016
|
Electrical-discharge truing machines for diamond grinding wheels. Part 1-Testing of accuracy
|
|
JB/T 12667.2-2016
|
Electrical-discharge truing machines for diamond grinding wheels. Part 2-Technical requirements
|
|
JB/T 12668.1-2016
|
NC electro-discharge grinding machines for ultra-hard cutting tools. Part 1-Testing of accuracy
|
|
JB/T 12668.2-2016
|
NC electro-discharge grinding machines for ultra-hard cutting tools. Part 2-Technical requirements
|
|
JB/T 12669-2016
|
Specification of corrugated metallic gaskets with non-metallic covering layers
|
|
JB/T 12670-2016
|
Specification of serrated metallic gaskets with non-metallic covering layers
|
|
JB/T 12671-2016
|
Earth moving. Application guide for hydraulic transmission oil
|
|
JB/T 1267-1993
|
(25 -- 200 MW turbogenerator rotor forgings)
|
|
JB/T 1267-2002
|
Specification for rotor forgings for 50MW to 200MW turbine generators
|
|
JB/T 1267-2014
|
Rotor fargings for 50 MW to 200 MW turbine generators. Technical speclflcatlo.
|
|
JB/T 12672-2016
|
Earth moveing. Application guide for hydraulic oil
|
|
JB/T 12673-2016
|
Light crawler tractor. General requirement
|
|
JB/T 12674-2016
|
Tractors front lamp, rear lamp and braking lamp
|
|
JB/T 12675-2016
|
Tractor hydraulic systems Limit values for cleanliness and measuring method
|
|
JB/T 12676-2016
|
Fuel sensor for tractor
|
|
JB/T 12677-2016
|
Tachometer sensor for tractor
|
|
JB/T 12678-2016
|
Tractors steering signal
|
|
JB/T 12679-2016
|
Specification for multi-station automatic balancing correction machine for micromotor rotor
|
|
JB/T 12680-2016
|
Specification for SRM series (IP55) switched reluctance motor(frame size 63～355)
|
|
JB/T 12681-2016
|
TYCKK series (IP44) high efficiency high voltage permanent magnet synchronous motors. Specification
|
|
JB/T 1268-1993
|
(25 -- 200 MW turbogenerator nonmagnetic retaining ring forgings)
|
|
JB/T 1268-2002
|
Specification for nonmagnetic retaining ring forgings for 50MW to 200MW turbine generators
|
|
JB/T 1268-2014
|
Mn18Cr5 series nonmagnetic retaining ring forgings for turbine generator. Technical specification
|
|
JB/T 12682-2016
|
TYC series (IP23) high efficiency high voltage permanent magnet synchronous motors. Specification
|
|
JB/T 12683-2016
|
YBZPE series flame-proof variable-frequency adjustable-speed electrmagnetic braking three-phase induction motors for crane application. Specification(frame sizes 112 to 250)
|
|
JB/T 12684-2016
|
YBZP series flame-proof variable-frequency adjustable-speed three-phase induction motors for crane application. Specification(frame sizes 112 to 250)
|
|
JB/T 12685-2016
|
Stator coils of high-voltage rotating electrical machines. Specification
|
|
JB/T 12686-2016
|
General specification for linear actuators
|
|
JB/T 12687-2016
|
Oil cleaning centrifuge
|
|
JB/T 12688-2016
|
The caster stem gas station oil concentrate
|
|
JB/T 12689-2016
|
Dry oil lubrication device of continuous casting machine
|
|
JB/T 12690-2016
|
Pneumatic pump
|
|
JB/T 12691-2016
|
Screw pump for lubrication devices
|
|
JB/T 1269-1993
|
(Turbogenerator magnetic ring forgings)
|
|
JB/T 1269-2002
|
Specification for magnetic ring forgings for turbine generators
|
|
JB/T 1269-2014
|
The magnetic ring forgings for turbine generators. Technical specification
|
|
JB/T 12692-2016
|
Oil air distributor
|
|
JB/T 12693-2016
|
Oil air lubrication station
|
|
JB/T 12694-2016
|
Single-line distributor(31.5 MPa)
|
|
JB/T 12695-2016
|
Used in the dynamic and static pressure bearing thin oil lubrication device
|
|
JB/T 12696-2016
|
Centralized filling unit
|
|
JB/T 12697-2016
|
No manual greasing electric lubrication pumps(20MPa)
|
|
JB/T 12698-2016
|
Modular dual-line distributor(40 MPa)
|
|
JB/T 12699-2016
|
Lubrication system. Solenoid valve(31.5 MPa)
|
|
JB/T 12700-2016
|
Lubrication system. Pressure controller
|
|
JB/T 12701-2016
|
Lubrication system. Automatic reversing valve(40 MPa)
|
|
JB/T 1270-1993
|
Technical conditions for large shaft forgings of turbines and hydro-generators
|
|
JB/T 1270-2002
|
Specification for shaft forgings for hydroturbines and hydrogenerators
|
|
JB/T 1270-2014
|
Shaft forgings for hydraulic turbines and hydraulic generators. Technical specification
|
|
JB/T 12702-2016
|
Double tube of mesh type magnetic filter
|
|
JB/T 12703-2016
|
Double pillar lift electric lubrication pumps(20 MPa)
|
|
JB/T 12704-2016
|
Automatic control lubrication pump station(40 MPa)
|
|
JB/T 12705-2016
|
Pneumatic silencers
|
|
JB/T 12706.1-2016
|
Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa series. Part 1-Medium series
|
|
JB/T 12707-2016
|
Electronic flash apparatus for road monitoring
|
|
JB/T 12708-2016
|
Technical specifications for water turbine of cooling tower for mechanical ventilation
|
|
JB/T 12709-2016
|
Printing machinery. Cutting system
|
|
JB/T 12710-2016
|
Printing machinery. Sheet-fed polyurethane adhesive laminator
|
|
JB/T 12711-2016
|
Printing machinery. Sheet-fed pressure platen embossing machine
|
|
JB/T 1271-1993
|
(AC and DC motor shaft forgings)
|
|
JB/T 1271-2002
|
Specification for shaft forgings for A. C and D. C electric machinery
|
|
JB/T 1271-2014
|
Shaft forgings for ACandDC electric machines. Technical specification
|
|
JB/T 12712-2016
|
Printing machinery. Case making machine
|
|
JB/T 12713-2016
|
Printing machinery. Transverse cutting machine
|
|
JB/T 12714-2016
|
Printing machinery. Roll-stock planten light-duty die cutter machine
|
|
JB/T 12715-2016
|
Powder metallurgy vacuum pump rotor for automobile engine -Technical conditions
|
|
JB/T 12716-2016
|
Sintered flange, cyllnder block for air conditioning compressor-Specification
|
|
JB/T 12717-2016
|
Sintered sprocket for automobile engine timing transmission system-Specification
|
|
JB/T 12718-2016
|
Technical specifications for copper base powder metallurgy sprinking - sintered friction plate
|
|
JB/T 12719-2016
|
Test method of accelerated life of daily-use metallic tube electric heating elements
|
|
JB/T 12720-2016
|
In-situ tensile testing instruments for solid materials. Technical specification
|
|
JB/T 12721-2016
|
In-situ nano-indentation/scratch testing instruments for solid materials. Technical specification
|
|
JB/T 12722-2016
|
Anchorage testing machines. Technical specification
|
|
JB/T 12723-2016
|
Testers for the heat deflection temperature/Vicat softening temperature. Technical specification
|
|
JB/T 12724-2016
|
Plastic-pipe hydraulic pressure testing machines
|
|
JB/T 12725-2016
|
Non-destructive testing instruments. Ultrasonic automatic detection system
|
|
JB/T 12726-2016
|
Nondestructive tesing instrument. Standard testing block. General technical conditions
|
|
JB/T 12727.3-2016
|
Nondestructive tesing instrument. Standard testing block. Part 3: Eddy current testing block
|
|
JB/T 12727.4-2016
|
Nondestructive testing instrument. Standard test block. Part 4: Magnetic particle testing block
|
|
JB/T 12727.5-2016
|
Nondestructive tesing instrument. Standard test block. Part 5: Penetrant testing block
|
|
JB/T 12728-2016
|
Specification and the energy efficiency grades for Y, YX series three-phase high voltage induction motors(Frame size 355～630)
|
|
JB/T 12729-2016
|
Specification and the energy efficiency grades for YKK, YXKK series 10 kV three-phase induction motors(Frame size 400~630)
|
|
JB/T 12730-2016
|
Specification and the energy efficiency grades for YKK, YXKK series three-phase high voltage induction motors(Frame size 355~630)
|
|
JB/T 12731-2016
|
The norm of energy consumption per unit product of small and medium motor
|
|
JB/T 12732-2016
|
Remanufactured internal combustion engines. Alternator process specifications
|
|
JB/T 12733-2016
|
Remanufactured internal combustion engines. Flywheel process specifications
|
|
JB/T 12734-2016
|
Remanufactured internal combustion engines. Connecting rod process specifications
|
|
JB/T 12735-2016
|
Remanufactured internal combustion engines. Part and element surface restoration process specifications
|
|
JB/T 12736-2016
|
Remanufactured internal combustion engines Fuel injection pump assembly process specifications
|
|
JB/T 12737-2016
|
Remanufactured internal combustion engines. Fuel injector assembly process specifications
|
|
JB/T 12738-2016
|
Remanufactured internal combustion engines. Cyinder liner process specifications
|
|
JB/T 12739-2016
|
Remanufactured internal combustion engines. Valve process specifications
|
|
JB/T 12740-2016
|
Remanufactured internal combustion engines. Crankshaft process specifications
|
|
JB/T 12741-2016
|
Remanufactured internal combustion engines. Camshaft process specifications
|
|
JB/T 12742-2016
|
Remanufactured internal combustion engines. Air compressor process specifications
|
|
JB/T 12743-2016
|
Remanufactured internal combustion engines. Turbocharger process specifications
|
|
JB/T 12744-2016
|
Remanufactured internal combustion engines. Starter process specifications
|
|
JB/T 12745-2016
|
Electrical hoists. Limit value of energy efficiency
|