|
Std ID |
Description (Standard Title) |
|
JB/T 10379-2002
|
General test methods for determining heat transfer performance and flow resistance of heat exchangers
|
|
JB/T 10380-2002
|
Pipe belt conveyor
|
|
JB/T 10380-2013
|
Pipe belt conveyor
|
|
JB/T 10381-2002
|
Flexible composite under slung cranes
|
|
JB/T 10381-2013
|
Flexible composite underslung cranes
|
|
JB/T 10382-2002
|
General technical specification for mechanical door lock of electronic equipment
|
|
JB/T 10383-2002
|
Technical specification for electric contacts of rivet type
|
|
JB/T 10384-2002
|
Steel castings for water passage components of small and medium sized hydraulic turbines
|
|
JB/T 10385-2002
|
Pressure thermal cut-outs for household and similar use of manual reset type
|
|
JB/T 10386-2002
|
Electronic expansion valve for household and similar air conditioner
|
|
JB/T 10387-2002
|
General specification for intelligent electrical actuators with FF protocol
|
|
JB/T 10388-2002
|
General specification for intelligent measurement and control node with bus communication
|
|
JB/T 10389-2002
|
Reliability design assess and censor for fieldbus intelligence instrument
|
|
JB/T 10389-2014
|
Reliability design review for intelligent instrument
|
|
JB/T 10390-2002
|
Reliability design methods for fieldbus intelligence instrument
|
|
JB/T 10390-2014
|
Reliability design methods for intelligent instrument
|
|
JB/T 10391-2002
|
Series Y three-phase asynchronous motor
|
|
JB/T 10391-2008
|
Specification for Y-series (IP44) three-phase asynchronous motor (Frame size 80~355)
|
|
JB/T 10392-2002
|
Modal test analysis and vibration measurement methods on the stator core and frame for turbo-generators
|
|
JB/T 10392-2013
|
Dynamic characteristic and vibration test methods of turbo-generators on stator frame and core and evaluation criteria
|
|
JB/T 10393-2002
|
Specification for electric boilers
|
|
JB/T 10394.1-2002
|
General technical conditions for painting equipment. Part 1: Fabricating parts
|
|
JB/T 10394.2-2002
|
General technical conditions for painting equipment. Part 2: Weldment
|
|
JB/T 10394.3-2002
|
General technical conditions for painting equipment. Part 3: Coating
|
|
JB/T 10394.4-2002
|
General technical conditions for painting equipment. Part 4: Installation
|
|
JB/T 10395-2004
|
Installing regulations for off-grid wind turbine generator system
|
|
JB/T 10396-2004
|
Reliability requirements for off-grid wind turbine generator system
|
|
JB/T 10397-2004
|
Testing regulations for off-gird wind turbine generator system
|
|
JB/T 10398-2004
|
After-sale technical service regulations for off-grid wind turbine generator system
|
|
JB/T 10399-2004
|
Rotor blades for off grid wind turbine generator system
|
|
JB/T 10400.1-2004
|
Gearbox of off-grid wind turbine generator system. Part 1: Technical condition
|
|
JB/T 10400.2-2004
|
Gearbox of off-grid wind turbine generator system. Part 2: Test method
|
|
JB/T 10401.1-2004
|
Braking system of off-grid wind turbine generator system. Part 1: Technical condition
|
|
JB/T 10401.2-2004
|
Braking system of off-grid wind turbine generator system. Part 2: Text method
|
|
JB/T 10402.1-2004
|
Yaw system of off-grid wind turbine generator system. Part 1: Technology condition
|
|
JB/T 10402.2-2004
|
Yaw system of off-grid turbine generator system. Part 2: Text method
|
|
JB/T 10403-2004
|
Tower for off-grid wind turbine generator system
|
|
JB/T 10404-2004
|
Operation and management regulation for centralized power supply of off-grid wind turbine generator system
|
|
JB/T 10405-2004
|
Technical condition for foundation and linkage of off-grid wind turbine generator system
|
|
JB/T 10406-2004
|
Internal combustion engines. Laser surface hardened cylinder liners. Specifications
|
|
JB/T 10407-2004
|
Metallographic text for piston with austenitic carrier internal combustion engine
|
|
JB/T 10407-2015
|
Internal combustion engine. Piston with austenitic carrier insert. Metallographic inspections
|
|
JB/T 10408-2004
|
Internal combustion engines. Test method for reliability of heat exchangers
|
|
JB/T 10408-2014
|
Internal combustion engines. Heat exchangers. Reliability test method
|
|
JB/T 10409-2004
|
Plate pressure filter
|
|
JB/T 10409-2013
|
Dise perssure filter
|
|
JB/T 10410-2004
|
Back wash filter for industry water
|
|
JB/T 10410-2014
|
Back wash filter for Industry water
|
|
JB/T 10411-2004
|
Ultrasonic inspection and quality estimation for austenic steel forging of centrifuge and separator
|
|
JB/T 10411-2014
|
Ultrasonic Inspection and quality estimation for stainless steel forging of centrifuge and separator
|
|
JB/T 10412-2004
|
XN(W) High pressure water jet steel. Pipe line cleaning equipment
|
|
JB/T 10413-2005
|
Spray booth
|
|
JB/T 10414-2004
|
Hydraulic two-port slip-cartridge valve. Test methods
|
|
JB/T 10415.1-2005
|
Hollow conductors for liquid inner cooled generator. Part 1: Copper hollow conductors
|
|
JB/T 10415.1-2016
|
Hollow conductors for liquid inner cooled generator. Part 1: Copper hollow conductors
|
|
JB/T 10415.2-2007
|
Hollow conductors for liquid inner cooled generator. Part 2: Stainless steel hollow conductors
|
|
JB/T 10416-2004
|
Automobile suspension spring specification
|
|
JB/T 10417-2004
|
Motorcycle absorber spring technical specifications
|
|
JB/T 10418-2004
|
Gas springs specification
|
|
JB/T 10419-2005
|
Accuracy of cycloidal gear and pin wheel for cycloidal drives
|
|
JB/T 10420-2004
|
Motor slines. Technical specifications of cold extrusion sline shafts
|
|
JB/T 10421-2004
|
Motor gears. Test code for airborne sound
|
|
JB/T 10422-2004
|
Motor gears. Technical specifications of precision forging gear blanks
|
|
JB/T 10423-2004
|
Motor gears. Technical specifications of gears and gear units
|
|
JB/T 10424-2004
|
Motor gears. General specification for quality inspection of gear materials and their heat treatment
|
|
JB/T 10425.1-2004
|
Yaw system of wind turbine generator systems. Part 1: Technology condition
|
|
JB/T 10425.2-2004
|
Yaw system of wind turbine generator systems. Part 2: Test method
|
|
JB/T 10426.1-2004
|
Braking system of wind turbine generator systems. Part 1: Technical condition
|
|
JB/T 10426.2-2004
|
Braking system of wind turbine generator systems. Part 2: Test methods
|
|
JB/T 10427-2004
|
General hydraulic system of wind turbine generator systems
|
|
JB/T 10428-2004
|
Poly-function protectors for transformers
|
|
JB/T 10428-2015
|
Poly-function protectors for transformers
|
|
JB/T 10429-2004
|
Ladle refining furnace transformers
|
|
JB/T 10429-2016
|
(Ladle refining furnace transformer)
|
|
JB/T 10430-2004
|
Quick action oil-pressure relays for transformers
|
|
JB/T 10430-2015
|
Sudden oil-pressure relays for transformers
|
|
JB/T 10431-2004
|
Power transformers immersed in fire resistance fluid
|
|
JB/T 10432-2004
|
Three-phase combined instrument transformers
|
|
JB/T 10432-2016
|
(Three - phase combined transformer)
|
|
JB/T 10433-2004
|
Three-phase voltage transformers
|
|
JB/T 10433-2015
|
Three-phase voltage transformers
|
|
JB/T 10434.2-2004
|
Plugs and socket-outlets for household and similar purposes Part 2: Particular requirements for switched socket-outlets without interlock for fixed installations
|
|
JB/T 10435-2004
|
Inspection methods for partial discharge testing system of electric cables
|
|
JB/T 10436-2004
|
Cross-linkable flame-retard dant polyolefin compounds for wire and cable
|
|
JB/T 10437-2004
|
Cross-linkable polyethylene insulating compounds for wires and cables
|
|
JB/T 10438-2004
|
Cross-linked polyvinyl chloride insulated wires and cables of rated voltages up to and including 450/750V
|
|
JB/T 10439-2004
|
Crystal growing furnaces TDR-series crystal growing furnaces by czochralski method
|
|
JB/T 10440-2004
|
Performance design standard for furnaces and burners of large-capacity pulverized-coal-fired boilers
|
|
JB/T 10441.1-2004
|
Crepe insulating papers for electrical purposes. Part 1: Definitions and general requirements
|
|
JB/T 10441.2-2004
|
Crepe insulating paper for electrical purposes. Part 2: Methods of test
|
|
JB/T 10441.3-2004
|
Crepe insulating papers for electrical purposes. Part 3: Technical specification
|
|
JB/T 10442.1-2004
|
Insulating paper coated with resin binder forming rhombic pattern for electrical purposes. Part 1: Definitions and general requirement
|
|
JB/T 10442.2-2004
|
Insulating paper coated with resin binder forming rhombic pattern for electrical purposes. Part 2: Methods of test
|
|
JB/T 10442.3-2004
|
Insulating paper coated with resin binder forming rhombic pattern for electrical purposes. Part 3: Individual materials. Insulating paper coated with epoxy resin binder forming rhombic pattern
|
|
JB/T 10443.1-2004
|
Specification for laminated pressboard. Part 1: Definitions classification and general requirements
|
|
JB/T 10443.2-2004
|
Specification for laminated pressboard. Part 2: Methods test
|
|
JB/T 10443.3-2004
|
Specification for laminated pressboard. Part 3: Specifications for individual materials specifications for laminated precompressed board types LB3.1.1, LB3.1.2, LB3.3.1 land LB3.3.2
|
|
JB/T 10444-2004
|
Specification for Y2 series high-voltage three-phase induction motors (Frame numbers 355 to 560)
|
|
JB/T 10444-2014
|
Specification and the energy efficiency grades for Y2 series, YX2 series high-voltage three-phase induction motors(Frame size 355～560)
|
|
JB/T 10445-2004
|
Specification for YR series 10kV three phase wound rotor induction motors (Frame numbers 450 to 630)
|