|
Std ID |
Description (Standard Title) |
|
GB/T 21655.2-2009
|
Textiles -- Evaluation of absorption and quick-drying -- Part 2: Method for moisture management tests
|
|
GB/T 22843-2009
|
Cushion and Pillow
|
|
GB/T 23447-2009
|
Shower outlets for bathing
|
|
GB/T 23493-2009
|
Chinese Sausage
|
|
GB/T 23658-2009
|
Elastomer seals transport gas and hydrocarbon liquids in pipes and fittings with seal material requirements
|
|
GB/T 23942-2009
|
Chemical reagent - General rules for inductively coupled plasma atomic emission spectrometry
|
|
GB/T 24153-2009
|
Rubber and Elastomer Materials - Determination of N-nitrosaminess
|
|
GB/T 24768-2009
|
1,4-Butanediol for industrial use
|
|
GB/T 24782-2009
|
Decision Method of Persistent, Bioaccumulative and Toxic Substances, and Very Persistent and Very Bioaccumulative Substances
|
|
GB/T 4146.1-2009
|
Textiles -- Man-made fibres -- Part 1: Generic names
|
|
GB/T 6379.6-2009
|
Accuracy (trueness and precision) of measurement methods and results -- Part 6: Use in practice of accuracy values
|
|
GB/T 9266-2009
|
Determination of scrub resistance of film of architectural paints and coatings
|
|
GB/T 11363-2008
|
Test method of the strength for brazed and soldered joint
|
|
GB/T 11540-2008
|
Fragrance/Flavor substances -- Determination of relative density
|
|
GB/T 12406-2008
|
Codes for the representation of currencies and funds
|
|
GB/T 12573-2008
|
Sampling method for cement
|
|
GB/T 12971.2-2008
|
Trolley and contact wires for electric traction -- Part 2: Aluminium and steel composite trolley and contact wires
|
|
GB/T 13384-2008
|
General specifications for packing of mechanical and electrical product
|
|
GB/T 14454.2-2008
|
Fragrance/Flavor substances - Method for valuation of odour
|
|
GB/T 14454.4-2008
|
Fragrance/Flavor substances -- Determination of refractive index
|
|
GB/T 15605-2008
|
Guide for pressure venting of dust explosions
|
|
GB/T 16475-2008
|
Temper designation system for wrought aluminium and aluminium alloy
|
|
GB/T 16716.1-2008
|
Packaging and packaging waste -- Part 1: General rules of disposal and utilization
|
|
GB/T 16799-2008
|
Furniture leather
|
|
GB/T 16935.5-2008
|
Insulation coordination for equipment within low-voltage systems -- Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2mm
|
|
GB/T 17919-2008
|
Directives for dust explosion protection for dust collectors in dust explosion hazardous area
|
|
GB/T 18046-2008
|
Ground granulated blast furnace slag used for cement and concrete
|
|
GB/T 18159-2008
|
Specifications of amusement rides coaster category
|
|
GB/T 18165-2008
|
Specifications of amusement rides fairy train category
|
|
GB/T 1019-2008
|
General requirements for the package of household and similar electrical appliances
|
|
GB/T 18838.3-2008
|
Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 3: High-carbon cast-steel shot and grit
|
|
GB/T 191-2008
|
Packaging -- Pictorial marking for handling of goods
|
|
GB/T 20042.2-2008
|
Proton exchange membrane fuel cell -- General technical specification of fuel cell stacks
|
|
GB/T 21331-2008
|
Fluff pulp
|
|
GB/T 21362-2008
|
Heat pump water heater for commercial and industrial and similar application
|
|
GB/T 21562-2008
|
Railway applications -- Specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS)
|
|
GB/T 21655.1-2008
|
Textiles -- Evaluation of absorption and quick-drying -- Part 1: Method for combination tests
|
|
GB/T 22065-2008
|
Pressure type SF6 gas density monitor
|
|
GB/T 223.11-2008
|
Iron, steel and alloy -- Determination of chromium content -- Visual titration or potentiometric titration method
|
|
GB/T 223.23-2008
|
Iron, steel and alloy - Determination of nickel content - The dimethylglyoxime spectrophotometric method
|
|
GB/T 223.31-2008
|
Iron, steel and alloy -- Determination of arsenic content -- Distillation-molybdenum blue spectrophotometric method
|
|
GB/T 223.59-2008
|
Iron, steel and alloy - Determination of phosphorus content - Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method
|
|
GB/T 223.64-2008
|
Iron, steel and alloy -- Determination of manganese content -- Flame atomic absorption spectrometric method
|
|
GB/T 223.67-2008
|
Iron, steel and alloy -- Determination of sulfur content -- Methylene blue spectrophotometric method
|
|
GB/T 223.69-2008
|
Iron, steel and alloy -- Determination of carbon contents -- Gas-volumetric method after combustion in the pipe furnace
|
|
GB/T 22388-2008
|
Determination of melamine in raw milk and dairy products
|
|
GB/T 23137-2008
|
Heat pump water heater for household and similar application
|
|
GB/T 3086-2008
|
High carbon chromium stainless bearing steels
|
|
GB/T 4214.4-2008
|
Household and similar electrical appliances -- Test code for determination of airborne acoustical noise -- Particular requirements for washing machines and spin extractors
|
|
GB/T 5013.1-2008
|
Rubber insulated cables of rated voltages up to and including 450/750 V -- Part 1: General requirements
|
|
GB/T 5483-2008
|
Natural gypsum
|
|
GB/T 5494-2008
|
Inspection of grain and oils -- Determination of foreign matter and unsound kernels of grain and oilseeds
|
|
GB/T 8074-2008
|
Testing method for specific surface of cement -- Blaine method
|
|
GB/T 8813-2008
|
Rigid cellular plastics -- Determination of compression properties
|
|
GB/T 12535-2007
|
Motor vehicle -- Starting performance -- Test method
|
|
GB/T 12782-2007
|
Motor vehicle -- Heating performance requirement -- Test method
|
|
GB/T 12960-2007
|
Quantitative determination of constituents of cement
|
|
GB/T 13810-2007
|
Wrought titanium and titanium alloy for surgical implants
|
|
GB/T 15227-2007
|
Test method of air permeability, water tightness, wind load resistance performance for curtain walls
|
|
GB/T 20913-2007
|
The protection of the occupants in the event of an off-set frontal collision for passenger car
|
|
GB/T 21087-2007
|
Air-to-air energy recovery equipment
|
|
GB/T 4161-2007
|
Metallic materials -- Determination of plane-strain fracture toughness
|
|
GB/T 1229-2006
|
High strength large hexagon nuts for steel structures
|
|
GB/T 1230-2006
|
High strength plain washers for steel structures
|
|
GB/T 12754-2006
|
Prepainted steel sheet
|
|
GB/T 12897-2006
|
Specifications for the first and second order leveling
|
|
GB/T 10069.1-2006
|
Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
|
|
GB/T 15102-2006
|
Surface decorated wood-based panels with paper impregnated thermosetting resins [including Modification List 1]
|
|
GB/T 20218-2006
|
Biaxially oriented polyamide (nylon) film
|
|
GB/T 20712-2006
|
Ham sausage
|
|
GB/T 2423.56-2006
|
Environmental testing for electric and electronic products - Part 2: Test methods - Test Fh: Vibration, broad-band random (digital control) and guidance
|
|
GB/T 3634.1-2006
|
Hydrogen - Part 1: Industrial hydrogen
|
|
GB/T 3871.3-2006
|
Agricultural tractors -- Test procedures -- Part 3: Power tests for power take-off
|
|
GB/T 3871.9-2006
|
Agricultural tractors -- Test procedures -- Part 9: Power tests for drawbar
|
|
GB/T 5163-2006
|
Sintered metal materials, excluding hard metals -- Permeable sintered metal materials -- Determination of density, oil content, and open porosity
|
|
GB/T 5750.10-2006
|
Standard examination methods for drinking Water -- Disinfection by-products parameters
|
|
GB/T 5750.11-2006
|
Standard examination methods for drinking water -- Disinfectants parameters
|
|
GB/T 5750.1-2006
|
Standard examination methods for drinking water -- General principles
|
|
GB/T 5750.12-2006
|
Standard examination methods for drinking water -- Microbiological parameters
|
|
GB/T 5836.2-2006
|
Unplasticized poly (vinyl chloride) (PVC-U) fittings for soil and waste inside buildings
|
|
GB/T 5973-2006
|
Cuneiform Connector for Use with Steel Wire Ropes
|
|
GB/T 5976-2006
|
Wire rope grips
|
|
GB/T 12428-2005
|
Laden mass calculating method for buses
|
|
GB/T 19752-2005
|
Hybrid electric vehicles - Power performance - Test method
|
|
GB/T 19941-2005
|
Leather and fur -- Chemical tests -- Determination of formaldehyde content
|
|
GB/T 10561-2005
|
Steel -- Determination of content of nonmetallic inclusions -- Micrographic method using standards diagrams
|
|
GB/T 7979-2005
|
Pulps -- Determination of dichloromethane soluble matter
|
|
GB/T 19541-2004
|
Soybean meal (solvent) for feedstuff
|
|
GB/T 8814-2004
|
Unplasticized polyvinyl chloride (PVC-U) profiles for the doors and windows
|
|
GB/T 19138-2003
|
Testing method of material insoluble in acetone for pesticides
|
|
GB/T 19204-2003
|
General characteristics of liquefied natural gas
|
|
GB/T 19226-2003
|
Determination of vanadium in coal
|
|
GB/T 19345-2003
|
Amorphous and nanocrystalline soft magnetic alloy strips
|
|
GB/T 5009.140-2003
|
Determination of acesulfame K in beverages
|
|
GB/T 5009.37-2003
|
Method for analysis of hygienic standard of edible oils
|
|
GB/T 7260.3-2003
|
Uninterruptible Power Systems (UPS) -- Part 3: Method of specifying the performance and test requirements
|
|
GB/T 8196-2003
|
Safety of machinery -- Guards -- General requirements for the design and construction of fixed and movable guards
|
|
GB/T 14698-2002
|
Test method of feed microscopy
|
|
GB/T 18669-2002
|
Steel bars for ship anchor chain
|
|
GB/T 455-2002
|
Paper and board determination of tearing resistance
|