|
Std ID |
Description (Standard Title) |
|
GB/T 10297-1998
|
Test method for thermal conductivity of nonmetal solid materials by hot-wire method
|
|
GB/T 21120-2007
|
Synthetic fibres for cement, cement mortar and concrete
|
|
GB/T 21121-2007
|
Animal and vegetable fats and oils -- Determination of oxidation stability (accelerated oxidation test)
|
|
GB/T 21122-2007
|
Fortified wheat flour
|
|
GB/T 21123-2007
|
Nutritional fortified -- Edible oil and fat with vitamin A
|
|
GB/T 21124-2007
|
Determination of black germ kernel in wheat
|
|
GB/T 21125-2007
|
Technical inspection for mushroom selecting and breeding
|
|
GB/T 21126-2007
|
Determination of sodium formaldehyde sulfoxylate in grain products
|
|
GB/T 21127-2007
|
Technical specification of identification and evaluation for drought resistance in wheat
|
|
GB/T 21128-2007
|
Structural bamboo and wood composite board
|
|
GB/T 21129-2007
|
Decorative bamboo veneered panel
|
|
GB/T 21130-2007
|
Cigarettes -- Determination of Benzo [α] pyrene in total particulate matter
|
|
GB/T 21131-2007
|
Environmental tobacco smoke -- Estimation of its contribution to respirable suspended particles -- Determination of particulate matter by ultraviolet absorbance and by fluorescence
|
|
GB/T 21132-2007
|
Tobacco and tobacco products -- Determination of dithiocarbamate pesticides residues -- Molecular absorption spectrometric method
|
|
GB/T 21133-2007
|
Environmental tobacco smoke -- Estimation of its contribution to respirable suspended particles -- Method based on solanesol
|
|
GB/T 21134-2007
|
Tobacco and tobacco products -- Determination of silicated residues insoluble in hydrochloric acid
|
|
GB/T 21135-2007
|
Tobacco and tobacco products -- Determination of vapour-phase nicotine in air -- Gas-chromatographic method
|
|
GB/T 21136-2007
|
Threshed tobacco -- Determination of stem content
|
|
GB/T 21137-2007
|
Leaf tobacco -- Determination of strip particle size
|
|
GB/T 21138-2007
|
Tobacco seeds
|
|
GB/T 21140-2007
|
Finger-jointed lumber -- Non-structural
|
|
GB/T 21141-2007
|
Technical regulations for sandification prevention and control
|
|
GB/T 21142-2007
|
Product of geographical indication -- Taixing Ginkgo nut
|
|
GB/T 21143-2007
|
Metallic materials -- Unified method of test for determination of quasi-static fracture toughness
|
|
GB/T 21143-2014
|
Metallic materials -- Unified method of test for determination of quasi-static fracture toughness
|
|
GB/T 21144-2007
|
Solid concrete brick
|
|
GB/T 21145-2007
|
Mechanical transport refrigeration units
|
|
GB/T 21149-2007
|
Fired roofing tiles
|
|
GB/T 21150-2007
|
Stall regulation wind turbine generator system
|
|
GB/T 21151-2007
|
Technical specification of main axial fan-mine
|
|
GB/T 21152-2007
|
Earth-moving machinery -- Braking systems of rubber-tyred machines -- Systems and performance requirements and test procedures
|
|
GB/T 21153-2007
|
Earth-moving machinery -- Units for dimensions, performance and capacities, and their measurement accuracies
|
|
GB/T 21154-2007
|
Earth-moving machinery -- Methods of measuring the masses of whole machines, their equipment and components
|
|
GB/T 21154-2014
|
Earth-moving machinery -- Methods of measuring the masses of whole machines, their equipment and components
|
|
GB/T 21155-2007
|
Earth-moving machinery -- Machine-mounted forward and reverse audible warning alarm -- Sound test method
|
|
GB/T 21155-2015
|
Earth-moving machinery -- Machine-mounted audible travel alarms and forward horns -- Test methods and performance criteria
|
|
GB/T 21156.1-2007
|
Special environmental condition -- Machinery for desert -- Part 1: Internal combustion engines on dry heat-desert condition
|
|
GB/T 21156.2-2007
|
Special environmental condition -- Machinery for desert -- Part 2: Construction machinery on dry heat-desert condition
|
|
GB/T 21157-2007
|
Equipment for distributing granulated pesticides or herbicides -- Test method
|
|
GB/T 21158-2007
|
Seed processing complete equipment
|
|
GB/T 21159.1-2007
|
Equipment for sowing and planting -- Disks -- Part 1: Concave disks type D1 -- Dimensions
|
|
GB/T 21159.2-2007
|
Equipment for sowing and planting -- Disks -- Part 2: Flat disks type D2 with single bevel -- Dimensions
|
|
GB/T 21160-2007
|
Agricultural trailers -- Balanced and semi-mounted trailers -- Determination of payload, vertical static load and axle load
|
|
GB/T 21161-2007
|
Agricultural trailers - Single-acting telescopic tipping cylinders. 25 MPa (250 bar) series - Types 1, 2 and 3 - Interchangeability dimensions
|
|
GB/T 21162-2007
|
Conversion rule for specific heat consumption and throughput of concurrent -- Flow grain dryer
|
|
GB/T 21163.1-2007
|
Agricultural grain driers -- Determination of drying performance -- Part 1: General
|
|
GB/T 21163.2-2007
|
Agricultural grain driers -- Determination of drying performance -- Part 2: Additional procedures and crop-specific requirements
|
|
GB/T 21164-2007
|
Determination of streptomycin, dihydrostreptomycin residues in royal jelly -- Liquid chromatography method
|
|
GB/T 21165-2007
|
Determination of chloramphenicol residues in casing -- LC-MS/MS method
|
|
GB/T 21166-2007
|
Determination of nitrofuran metabolites residues in casing -- LC-MS/MS method
|
|
GB/T 21167-2007
|
Determination of nitrofuran metabolites residues in royal jelly -- LC-MS-MS method
|
|
GB/T 21168-2007
|
Determination of tylosin residues in honey -- LC-MS/MS method
|
|
GB/T 21169-2007
|
Determination of amitraz and metabolite residues in honey. liquid chromatography
|
|
GB/T 21170-2007
|
Glass hollowware -- Test method for lead and cadmium release
|
|
GB/T 21171-2007
|
Technical terms of fragrances and flavors
|
|
GB/T 21172-2007
|
Sensory analysis -- General guidance and test method for assessment of the colour of foods
|
|
GB/T 21173-2007
|
Determination of sulfa drugs residues in animal derived food -- Radio-receptor assay method
|
|
GB/T 21174-2007
|
Determination of β-Lactams residues in animal derived food -- Radio-receptor assay method
|
|
GB/T 21179-2007
|
Scraps of nickel and nickel alloy
|
|
GB/T 21180-2007
|
Scraps of tin and tin alloy
|
|
GB/T 21181-2007
|
Secondarily lead and lead alloy ingots
|
|
GB/T 21182-2007
|
Scraps of cemented carbide
|
|
GB/T 21183-2007
|
Zirconium and zirconium alloy sheet, strip and foil
|
|
GB/T 21184-2007
|
Rubber compounding ingredients -- Sulfenamide accelerators -- Test methods
|
|
GB/T 21185-2007
|
Information technology -- Office machines -- Method of specifying image reproduction of colour copying machines by analog test charts -- Realisation and application
|
|
GB/T 21186-2007
|
Fourier transform infrared spectrometer
|
|
GB/T 21187-2007
|
Atomic absorption spectrophotometer
|
|
GB/T 21188-2007
|
Measurement of gas flow by means of critical flow Venturi nozzles
|
|
GB/T 21189-2007
|
Verification of pendulum impact-testing machines used for Charpy, lzod and tensile impact-testing of plastics
|
|
GB/T 21190-2007
|
Paper, board and corrugated fibre board -- Description and calibration of compression-testing equipment
|
|
GB/T 21191-2007
|
Atomic fluorescence spectrometer
|
|
GB/T 21194-2007
|
Generic reliability assurance requirements for optoelectronic devices used in telecommunications equipment
|
|
GB/T 21195-2007
|
The specifications of antenna for mobile communication indoor distributed system
|
|
GB/T 21196.1-2007
|
Textiles -- Determination of the abrasion resistance of fabrics by the Martindale method -- Part 1: Martindale abrasion testing apparatus
|
|
GB/T 21196.2-2007
|
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown
|
|
GB/T 21196.3-2007
|
Textiles -- Determination of the abrasion resistance of fabrics by the Martindale method -- Part 3: Determination of mass loss
|
|
GB/T 21196.4-2007
|
Textiles -- Determination of the abrasion resistance of fabrics by the Martindale method -- Part 4: Assessment of appearance change
|
|
GB/T 21197-2007
|
Linear fiber optic heat detectors
|
|
GB/T 21198.1-2007
|
Determination of precious metals in precious metals jewellery alloys -- Method using ICP spectrometry -- Part 1: Platinum jewellery alloys -- Determination of platinum -- Method using a solution with yttrium as internal standard element
|
|
GB/T 21198.2-2007
|
Determination of precious metals in precious metals jewellery alloys -- Method using ICP spectrometry -- Part 2: Platinum jewellery alloys -- Determination of platinum -- Method using the intensity ratios of all minor constituents with reference to platin
|
|
GB/T 21198.3-2007
|
Determination of precious metals in precious metals jewellery alloys -- Method using ICP spectrometry -- Part 3: Palladium jewellery alloys -- Determination of palladium -- Method using a solution with yttrium as internal standard element
|
|
GB/T 21198.4-2007
|
Determination of precious metals in precious metals jewellery alloys -- Method using ICP spectrometry -- Part 4: 999‰ precious metals jewellery alloys -- Determination of precious metals -- Difference method
|
|
GB/T 21198.5-2007
|
Determination of precious metals in precious metals jewellery alloys -- Method using ICP spectrometry -- Part 5: 999‰ silver jewellery alloys -- Determination of silver -- Difference method
|
|
GB/T 21198.6-2007
|
Determination of precious metals in precious metals jewellery alloys -- Method using ICP spectrometry -- Part 6: Difference method
|
|
GB/T 21199-2007
|
Dry mono-component toner for laser printer
|
|
GB/T 21200-2007
|
Toner used in dry dual-component developer for laser printer
|
|
GB/T 21201-2007
|
Dry dual-component developer for laser printer
|
|
GB/T 21202-2007
|
Digital multi-function monochrome copier (printer) device
|
|
GB/T 21203-2007
|
Information technology -- Office equipment -- Method for measuring copying machine productivity
|
|
GB/T 21204.1-2007
|
Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments -- Part 1: Generic specifications
|
|
GB/T 21205-2007
|
Specification for the refurbishing of rotating electrical machines
|
|
GB/T 21206-2007
|
Characteristics of line post insulators
|
|
GB/T 21207.1-2014
|
Low-voltage switchgear and controlgear -- Device profiles for networked industrial devices -- Part 1: General rules for development of device profiles
|
|
GB/T 21207.2-2014
|
Low-voltage switchgear and controlgear -- Device profiles for networked industrial devices -- Part 2: Root device profiles for starters and similar equipment
|
|
GB/T 21207-2007
|
The basic principles of low-voltage switchgear and control equipment for networked industrial devices
|
|
GB/T 21208-2007
|
Low-voltage switchgear and controlgear -- Controllers for drivers of stationary fire pumps
|
|
GB/T 21209-2007
|
Guide for the design and performance of cage induction motors specifically designed for converter supply
|
|
GB/T 21210-2007
|
Starting performance of single-speed three-phase cage induction motors
|
|
GB/T 21210-2016
|
Starting performance of single-speed three-phase cage induction motors
|
|
GB/T 21211-2007
|
Equivalent loading and super-position techniques -- Indirect testing to determine temperature rise of rotating electrical machines
|