GB/T 2408-2021 PDF English
US$365.00 · In stock · Download in 9 secondsGB/T 2408-2021: Plastics - Determination of burning characteristics - Horizontal and vertical test Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 2408: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 2408-2021 | English | 365 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Plastics - Determination of burning characteristics - Horizontal and vertical test
| Valid |
| GB/T 2408-2008 | English | 85 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Plastics -- Determination of burning characteristics -- Horizontal and vertical test [Including 2018XG1]
| Obsolete |
| GB/T 2408-1996 | English | 399 |
Add to Cart
|
3 days
|
Plastics--Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
| Obsolete |
| GB 2408-1980 | English | 199 |
Add to Cart
|
2 days
|
Plastics--Combustion performance test--Horizontal burning method
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 2408-2021
GB/T 2408-2021: Plastics - Determination of burning characteristics - Horizontal and vertical test
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT2408-2021
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 83.080.01
CCS G 31
Replacing GB/T 2408-2008
Plastics - Determination of burning characteristics -
Horizontal and vertical test
(IEC 60695-11-10.2013, Fire hazard testing - Part 11-10.Test flames -
50 W horizontal and vertical flame test methods, MOD)
Issued on. AUGUST 20, 2021
Implemented on. MARCH 01, 2022
Issued by. State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword... 3
1 Scope... 6
2 Normative references... 6
3 Terms and definitions... 7
4 Principle... 9
5 Significance of the fire tests... 9
6 Apparatus... 10
7 Test specimens... 12
8 Test method A – Horizontal burning test... 14
9 Test method B – Vertical burning test... 19
Appendix A (Informative) Precision of test method A... 32
Appendix B (Informative) Precision of test method B... 33
References... 34
Foreword
This document was drafted in accordance with the rules given in GB/T 1.1-2020,
Directives for standardization - Part 1.Rules for the structure and drafting of
standardizing documents.
This document replaces GB/T 2408-2008, Plastics - Determination of burning
characteristics - Horizontal and vertical test. Compared with GB/T 2408-2008, the
main technical changes, except editorial changes, are as follows.
a) Modify some contents of Terms and definitions (see Chapter 3; Chapter 3 of the
2008 edition);
b) Modify the arrangement of the chapters of “Test specimen”, “Method A” and
“Method B”, and add relevant information to test specimen dimensions (see
Chapter 7, Chapter 8 and Chapter 9; Chapter 7, Chapter 8 and Chapter 9 of the
2008 edition);
c) Modify the horizontal burning classification (see 8.4; 8.4 of the 2008 edition);
d) Add information on thickness to material classification [see 8.5m) and 9.5l)];
e) Add evaluation criteria for “burned to the holding clamp” (see 9.2.4);
f) Delete the figure of “Burner/operator/test specimen orientation” (Figure 6 of the
2008 edition);
g) Add the figures of “Clearance gauge”, “Flame application”, “Flame application
when there are molten drips”, “HB specimen gauge”, “V specimen gauge
(example)”, “Flame front position not classified as ‘burned to the holding clamp’”
and “Flame front position classified as ‘burned to the holding clamp’” (see Figure
6 ~ Figure 12).
This document uses the redrafting method to modify and adopt IEC 60695-11-10.2013
Fire hazard testing - Part 11-10.Test flames - 50 W horizontal and vertical flame test
methods.
The main technical differences, except editorial changes, between this document and
IEC 60695-11-10.2013, and their reasons are as follows.
a) With regard to the normative references, this document makes technical
adjustments to adapt to the technical conditions of China. The adjustments are
concentrated in Chapter 2 “Normative references”. The specific adjustments are
as follows.
● Use GB/T 5169.22-2015 which is equivalent to the international standard to
replace IEC 60695-11-4.2011 (see 6.2, 8.2.3, 9.2.2 and 9.2.3);
● Use GB/T 5471-2008 which is equivalent to the international standard to
replace ISO 295.2004 (see 7.1);
● Use GB/T 9352-2008 which is equivalent to the international standard to
replace ISO 293.2004 (see 7.1);
● Use GB/T 12006.1-2009 which is equivalent to the international standard to
replace ISO 307.2007 (see 9.4);
● Use GB/T 17037.1-2019 and GB/T 17037.5-2020 which modify and adopt
international standards to replace ISO 294 (all parts) (see 7.1);
● Use GB/T 2918-2018 to replace ISO 291.2008 (see the note of 6.7), and move
it to the references;
● Delete the ISO/IEC guideline 51 and the ISO/IEC guideline 104.
b) Delete the terms of “as received”, “combustion”, “enclosure”, “fire hazard
assessment”, “fire retardant”, “fire risk”, “flame” and “ignition”, because such
nouns are general terms and some of them are indicated with the forms like verb
or noun, which is inconsistent with the requirements for national standards.
c) Modify horizontal burning classification to “The materials shall be classified as
HB or HB below, as well as HB40 or HB75” instead of “The materials shall be
classified HB, HB40 or HB75”, because c in the requirements for HB
classification partly coincides with c in the requirements for HB40 and HB70,
while c in the requirements for HB40 is obviously differentiated from that for
HB70; so, this modification is made to better guide the criteria for classification
(see 8.4).
For convenience of use, this document also makes the following editorial changes.
a) Change the standard name from “Fire hazard testing - Part 11-10.Test flames - 50
W horizontal and vertical flame test methods” to “Plastics - Determination of
burning characteristics - Horizontal and vertical test”.
b) Change “electrotechnical products” in the Scope to “plastic and non-metallic
materials”.
This document was proposed by China Petroleum and Chemical Industry Federation.
This document shall be under the jurisdiction of National Technical Committee 15 on
Plastic of Standardization Administration of China (SAC/TC 15).
Drafting organizations of this document. China Bluestar Chengrand Co., Ltd., Chengdu
Kingfa Science & Technology New Material Co., Ltd., Shandong Dawn Polymer Co.,
Ltd., Guangzhou Quality Supervision and Testing Institute, Nanjing Jiangning
Analytical Instrument Co., Ltd., Weihai Lianqiao New Material Science and
Technology Co., Ltd., Huafon Group Ltd., Xiamen Defenghang Plastic Industry Co.,
Ltd., Shenzhen CST Standards Technology Co., Ltd., Fujian Inspection and Research
Institute for Product Quality, CGN Juner (Zhejiang) New Materials CO., LTD.,
Liaocheng University, Qingdao Dagang Customs of P. R. China, Jilin Product Quality
Supervision and Inspection Institute.
Chief drafting staffs of this document. Cao Jinpeng, Wang Lin, Zhao Lei, Li Xiaozeng,
Zheng Ning, Wang Fuhai, Li Hongjie, Zhang Guoqiang, Huang Zhiqin, Zhao Yufen,
He Yang, Zhang Lei, Teng Mouyong, Gao Jianguo, Li Shangyu, Xie Peng, Zheng
Mingjia, Li Yetian, He Guoshan, Qi Ji, Guo Yingying.
This document was first published in 2008, and this is the first revision.
Plastics - Determination of burning characteristics -
Horizontal and vertical test
1 Scope
This document specifies small-scale laboratory test procedures intended to compare the
burning behaviour of different materials used in plastic and non-metallic materials
when vertically or horizontally oriented test bar specimens are exposed to a small flame
ignition source with a nominal thermal power of 50 W. These test methods determine
either the linear burning rate or the self-extinguishing properties of materials.
2 Normative references
The following documents are normatively referenced in this document and are
indispensable for its application. For dated references, only the version corresponding
to that date is applicable to this document; for undated references, the latest version
(including all amendments) is applicable to this document.
GB/T 5169.22-2015, Fire hazard testing for electric and electronic products - Part
22.Test flames - 50 W flame - Apparatus and confirmational test method (IEC
60695-11-4.2011, IDT)
3 Terms and definitions
The following terms and definitions are applicable to this document.
Physical object or condition with a potential for an undesirable consequence from fire.
Ability of a material or product to burn with a flame under specified conditions.
Length of material burned per unit time under specified conditions.
4 Principle
Fix a rectangular bar-shaped test specimen to a horizontal or vertical fixture by one end
and expose the free end to a specified test flame. Assess the burning behaviour of the
horizontally supported bar under specific test conditions by measuring the linear
burning rate.
5 Significance of the fire tests
The significant feature of these fire test methods is the arrangement of the test
specimens in either a horizontal or a vertical position. These testing arrangements make
it possible to distinguish between different classes of material flammability.
Burning behaviour, as measured by these test methods, is affected by such factors as
density, any anisotropy of the material and the thickness of the test specimen.
6 Apparatus
Placing a mirror in the chamber to provide a rear view of the test specimen has been
found to be useful.
The air-circulating oven shall provide a conditioning temperature of 70 °C ± 2 °C,
unless otherwise stated in the relevant specification, whilst providing not less than five
air changes per hour.
7 Test specimens
Other measuring devices equivalent to a micrometer may be used to measure thickness
if found to be satisfactory.
Test specimens with extremes of density, melt flows and filler/reinforcement content
may be provided and considered representative of the range if the test results yield the
same flame test classification. If the test results do not yield the same flame test
8 Test method A – Horizontal burning test
Three test specimens shall be tested. Each test specimen shall be marked with two lines
perpendicular to the longitudinal axis of the bar, 25 mm ± 1 mm and 100 mm ± 1 mm
from the end that is to be exposed to the test flame.
With the central axis of the burner tube vertical, place the burner remote from the test
specimen and set the burner (see 6.2) to produce a standardized 50 W nominal test flame,
conforming with GB/T 5169.22-2015.The flame shall be confirmed.
9 Test method B – Vertical burning test
Clamp the test specimen using the upper 6 mm of its length with the longitudinal axis
vertical. The lower end of the test specimen shall be 300 mm ± 10 mm above the
horizontal cotton pad (see 6.12). The cotton pad shall be approximately 50 mm × 50
mm × 6 mm (uncompressed thickness) and shall have a maximum mass of 0.08 g (see
Figure 3).
Maintaining the central axis of the burner tube in the vertical position, approach the test
specimen horizontally towards the wide face (see Figure 7).
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 2408-2021 be delivered?Answer: The full copy PDF of English version of GB/T 2408-2021 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 2408-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2408-2021_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 2408-2021 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 2408-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2408-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 2408-2021?A step-by-step guide to download PDF of GB/T 2408-2021_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 2408-2021".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|