YY/T 1137-2017 PDF English
US$150.00 · In stock · Download in 9 secondsYY/T 1137-2017: General technique requirements for orthopaedics saw Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid YY/T 1137: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| YY/T 1137-2017 | English | 150 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
General technique requirements for orthopaedics saw
| Valid |
| YY 1137-2005 | English | 319 |
Add to Cart
|
3 days
|
General technical requirements for orthopaedics saw
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: YY/T 1137-2017
YY/T 1137-2017: General technique requirements for orthopaedics saw---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YYT1137-2017
YY
PHARMACEUTICAL INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 11.040.40
C 35
Replacing YY 1137-2005
General technique requirements for orthopaedics saw
Issued on: MAY 2, 2017
Implemented on: APRIL 1, 2018
Issued by. China Food and Drug Administration
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Classification ... 4
4 Requirements ... 5
5 Test methods ... 6
6 Marking ... 7
7 Packaging, transport, storage ... 8
Appendix A (Normative) Bending resistance test ... 9
References ... 11
Foreword
This Standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces YY 1137-2005 “General technique requirements for
orthopaedics saw”. As compared with YY 1137-2005, the main technical
changes are as follows.
- ADD YY/T 0294.1 and ASTM F899 standards for “chemical composition”
(SEE 4.2), and EXPAND the range of materials used;
- MAKE corresponding adjustments to appearance (SEE 4.3) and
performance (SEE 4.4) requirements of the former standard;
- CHANGE the former standard’s Rockwell hardness to Vickers hardness
(SEE 4.5);
- ADD bending resistance (SEE 4.8 and Appendix A);
- DELETE the content of inspection rules (SEE Chapter 6 of YY 1137-2005).
Attention is drawn to the possibility that some of the elements of this document
may be the subject of patent rights. The issuing authority of this document shall
not be held responsible for identifying any or all such patent rights.
This Standard was proposed by China Food and Drug Administration.
This Standard shall be under the jurisdiction of National Technical Committee
110 on Implants for Surgery and Orthopedic Devices of Standardization
Administration of China (SAC/TC 110).
Drafting organizations of this Standard. Tianjin Medical Device Quality
Supervision and Inspection Center, Naton Intl. Orthopaedic Research Center,
Beijing Fule Science & Technology Development Co., Ltd.
Main drafters of this Standard. Li Nan, Duan Qingjiao, Jiang Yao, Li Renyao,
Qiu Wanyu, Guo Zixue.
The previous releases of versions of YY 1137-2005 and YY 1137 replaced by
this Standard are.
- WS 2-199-1975;
- YY 91137-1999.
General technique requirements for orthopaedics saw
1 Scope
This Standard specifies the classification, requirements, test methods, marking,
packaging, transport, storage, etc. of orthopaedics saw.
This Standard applies to orthopaedics saws for cutting bones and plaster saws
for cutting plaster.
2 Normative references
The following documents are indispensable for the application of this Standard.
For the dated references, only the versions with the dates indicated are
applicable to this document. For the undated references, the latest version
(including all the amendments) are applicable to this Standard.
GB/T 1184 Geometrical tolerancing - Geometrical tolerance for features
without individual tolerance indications
GB/T 1220 Stainless steel bars
GB/T 4340.1 Metallic materials - Vickers hardness test - Part 1. Test method
GB/T 8013.1 Anodic oxide coating and organic polymer coatings on
aluminum and its alloys - Part 1. Anodic oxide coatings
YY/T 0149-2006 Medical instruments of stainless steel - Test methods of
corrosion resistance
YY/T 1052 Marking requirements for surgical instruments
YY/T 0294.1 Surgical instruments - Metallic materials - Part 1. Stainless steel
3 Classification
The classification of orthopaedics saw products is shown in Table 1.
Table 1 -- Classification of orthopaedics saw products
For cutting bones For cutting plaster
Blade saw Wire saw Plaster saw
certificate.
a) Manufacturer’s name;
b) Inspector’s code;
c) Date of inspection.
7 Packaging, transport, storage
7.1 Packaging
7.1.1 The orthopaedics saw shall, after rust-proof treatment, be placed in a
neutral plastic bag. There shall be an inspection certificate in the bag. The bag
needs to be sealed.
7.1.2 PUT the sealed orthopaedics saw into a packaging box. The box shall be
labeled with a seal.
7.1.3 If there are special requirements, it shall be packaged according to the
order contract.
7.2 Transport
The requirements for transport of orthopaedics saw shall be in accordance with
the order contract.
7.3 Storage
The packaged orthopaedics saw shall be stored in a room with a relative
humidity of no more than 80%, no corrosive gas, and good ventilation.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of YY/T 1137-2017 be delivered?Answer: The full copy PDF of English version of YY/T 1137-2017 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of YY/T 1137-2017_English with my colleagues?Answer: Yes. The purchased PDF of YY/T 1137-2017_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- YY/T 1137-2017 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version YY/T 1137-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YY/T 1137-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of YY/T 1137-2017?A step-by-step guide to download PDF of YY/T 1137-2017_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "YY/T 1137-2017".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |