YY 0571-2013 PDF English
US$560.00 · In stock · Download in 9 secondsYY 0571-2013: Medical electrical equipment. Part 2: Particular requirements for the safety of electrically operated hospital beds Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Obsolete YY 0571: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| YY 0571-2013 | English | 560 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Medical electrical equipment. Part 2: Particular requirements for the safety of electrically operated hospital beds
| Obsolete |
| YY 0571-2005 | English | RFQ |
ASK
|
7 days
|
Medical electrical equipment - Part 2: Particular requirements for the safety of electrically operated hospital beds
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: YY 0571-2013
YY 0571-2013: Medical electrical equipment. Part 2: Particular requirements for the safety of electrically operated hospital beds
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YY0571-2013
YY
PHARMACEUTICAL INDUSTRY STANDARD
ICS 11.040.99
C 46
Replacing YY 0571-2005
Medical electrical equipment - Part 2.Particular
requirements for the safety of electrically operated
hospital beds
(IEC 60601-2-38.1996, MOD)
Issued on. OCTOBER 21, 2013
Implemented on. OCTOBER 01, 2014
Issued by. China Food and Drug Administration
Table of Contents
Foreword... 5
SECTION ONE - GENERAL... 7
1 Scope and object... 7
2 Terminology and definitions... 8
3 General requirements... 11
5 Classification... 11
6 Identification, marking and documents... 12
SECTION TWO - ENVIRONMENTAL CONDITIONS... 14
SECTION THREE - PROTECTION AGAINST ELECTRICAL SHOCK
HAZARDS... 14
17 Separation... 14
18 Protective earthing, functional earthing and potential equalization... 15
SECTION FOUR - PROTECTION AGAINST MECHANICAL HAZARDS... 15
21 Mechanical strength... 15
22 Moving parts... 17
23 Surfaces, corners and edges... 17
24 Stability in NORMAL USE... 18
26 Vibration and noise... 19
28 Suspended masses... 19
SECTION FIVE - PROTECTION AGAINST HAZARDS FROM UNWANTED OR
EXCESSIVE RADIATION... 21
36 Electromagnetic compatibility... 21
SECTION SIX - PROTECTION AGAINST HAZARDS OF IGNITION OF
FLAMMABLE ANAESTHETIC MIXTURES... 21
SECTION SEVEN - PROTECTION AGAINST EXCESSIVE TEMPERATURES
AND OTHER SAFETY HAZARDS... 21
44 Overflow, spillage, leakage, humidity, ingress of liquids, cleaning,
sterilization, disinfection and compatibility... 22
SECTION EIGHT - ACCURACY OF OPERATING DATA AND PROTECTION
AGAINST HAZARDOUS OUT... 23
SECTION NINE - ABNORMAL OPERATION AND FAULT CONDITIONS.
ENVIRONMENTAL TESTS... 23
52 Abnormal operation and fault conditions... 23
SECTION TEN - CONSTRUCTIONAL REQUIREMENTS... 24
54 General... 24
56 Components and general assembly... 24
57 MAINS PARTS, components and layout... 25
Appendix L (Normative) References - Publications mentioned in this Standard
... 38
Annex AA (Informative) Guidance and rationale for particular subclauses... 39
Annex BB (Informative) Possible considerations and tests for ELECTRICALLY
OPERATED HOSPITAL BEDS... 46
Figure 101 -- ELECTRICALLY OPERATED HOSPITAL BED, general
arrangement... 26
Figure 102 -- Distribution of the SAFE WORKING LOAD for tests... 27
Figure 103 -- Lateral stability test. load arrangement (plan view)... 28
Figure 104 -- Longitudinal stability test. load arrangement (plan view)... 29
Figure 105 -- Lateral stability test. load arrangement (end elevation)... 30
Figure 106 -- Longitudinal stability test. load arrangement (side elevation)... 30
Figure 107 -- BED function controls and/or actuators. guidelines for creating
graphic symbols... 31
Figure 108 -- Graphic symbol for SAFE WORKING LOAD... 32
Figure 109 -- Typical spacings for SQUEEZING and SHEARING POINTS... 32
Figure 110 -- Clearance measurements around barriers... 33
Figure 111 -- APPLIED PARTS region and potential equalization... 33
Figure 112 -- Minimum angle between the back and leg/upper leg sections for
various configurations of the MATTRESS SUPPORT PLATFORM [see item c)
of 56.10]... 34
Figure 113 -- Application of forces for test of SIDE RAILS... 35
Figure 114 -- Examples (only) of BEDS with segmented SIDE RAILS and single-
piece SIDE RAILS... 36
Figure 115 -- Test cone... 37
Figure BB.1 -- Impactor... 52
Figure BB.2 -- Loading positions... 53
Figure BB.3 -- Loading pad... 54
Figure BB.4 -- Recommended range of adjustment for sections of the
MATTRESS SUPPORT PLATFORM... 55
Figure BB.5 -- Position of the LIFTING POLE handle... 56
Foreword
The series of standards for the safety requirements of medical electrical
equipment is mainly composed of two parts.
- Part 1.General requirements for the safety of medical electrical equipment;
- Part 2.Particular requirements for the safety of medical electrical
equipment.
This Particular Standard belongs to Part 2.Particular requirements for the
safety of medical electrical equipment. This Part is a modification and
supplement to GB 9706.1-2007 "Medical electrical equipment - Part 1.General
requirements for safety".
This Standard replaces YY 0571-2005.
Compared with YY 0571-2005, the main differences of this Standard include.
- Delete the content of national standard GB 9706.1-2007.
- Modify the editorial errors in the YY 0571-2005 standard.
This Particular Standard is drafted in accordance with the rules given in GB/T
1.1-2009.
This Standard uses the redraft law to modify the international standard IEC
60601-2-38.1996 "Medical electrical equipment - Part 2.Particular
requirements for the safety of electrically operated hospital beds" and
Amendment 1.1999.
The difference between this Standard and IEC 60601-2-38.1996 "Medical
electrical equipment - Part 2.Particular requirements for the safety of
electrically operated hospital beds" and Amendment 1.1999 is mainly
manifested in.
- Clause 36 Electromagnetic compatibility. Because the IEC 60601-1-2
standard cited in IEC 60601-2-38.1996 and Amendment 1.1999 is the 1993
edition, and the corresponding industry standard YY 0505-2012 adopts the
2004 edition of IEC 60601-1-2; therefore, this Standard has made
necessary, reasonable and principle-equivalent modifications to the clause
36 of previous IEC 60601-2-38.1996 and Amendment 1.1999.
In addition, this Standard also makes the following editorial changes to IEC
60601-2-38.1996 and Amendment 1.1999.
- Replace the decimal point symbol "," with the decimal point symbol ".";
- Delete the cover and foreword in the IEC 60601-2-38 standard;
- The translation of auxiliary verbs in this Standard is consistent with GB
9706.1-2007;
- In order to clarify the relevant standards cited in the standard, modify the
informative appendix L.
- For other international standards quoted in the standard, if have been
transformed into Chinese standards, this Part replaces the quoted
international standard number with the national standard number.
Attention is drawn to the possibility that some of the elements of this document
may be the subject of patent rights. The issuing authority of this document shall
not be held responsible for identifying any or all such patent rights.
This Particular Standard was proposed by and shall be under the jurisdiction of
Subcommittee 5 on Medical Electronic Instruments, National Technical
Committee 10 on Medical Electrical Equipment of Standardization
Administration of China (SAC/TC 10/SC 5).
Drafting organization of this Particular Standard. Shanghai Testing and
Inspection Institute for Medical Devices.
Main drafters of this Standard. Liu Jiong, Xu Jin.
This Standard was first issued in 2005.
Medical electrical equipment - Part 2.Particular
requirements for the safety of electrically operated
hospital beds
SECTION ONE - GENERAL
The clauses and subclauses of this section of the General Standard apply
except as follows.
1 Scope and object
This clause of the General Standard applies, except as follows.
A requirement of this Particular Standard replacing or modifying requirements
of the General Standard or the Collateral Standard takes precedence over the
corresponding General Requirement(s).
2 Terminology and definitions
This clause of the General Standard applies except as follows.
BED and its accessories intended for use in the diagnosis, treatment or
monitoring of an adult PATIENT whilst under medical supervision (hereinafter
referred to as BED).
3 General requirements
This clause of the General Standard applies except as follows.
If alternative means of construction have been employed or if a requirement of
this Standard has not been met, in order to provide benefit to the PATIENT, a
risk assessment shall be performed (in accordance with YY/T 0316-2008) to
demonstrate that the overall level of safety has not been compromised.
5 Classification
This clause of the General Standard applies except as follows.
6 Identification, marking and documents
This clause of the General Standard applies except as follows.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of YY 0571-2013 be delivered?Answer: The full copy PDF of English version of YY 0571-2013 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of YY 0571-2013_English with my colleagues?Answer: Yes. The purchased PDF of YY 0571-2013_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- YY 0571-2013 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version YY 0571-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YY 0571-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of YY 0571-2013?A step-by-step guide to download PDF of YY 0571-2013_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "YY 0571-2013".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|