YDC 023-2006 (YDC023-2006)

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Related Standard	Status	PDF
YDC 023-2006	English	700	Add to Cart	0--9 seconds. Auto-delivery	Test Specification of Mobile Station (MS) for 800MHz CDMA 1X Digital Cellular Mobile Telecommunication Network, Part Ⅰ: Minimum Standard, Function and Performance	YDC 023-2006	Obsolete	YDC 023-2006

YDC 023-2006 (Replaced by.YD/T 1576.1-2013)
YD
Telecommunication Industry Standard
Of the People’s Republic of China
Test Specification of Mobile Station (including Non
UIM Mobile Station) for 800MHz CDMA 1X Digital
Cellular Mobile Telecommunication Network. Part 1.
Minimum Standard, Function and Performance
Test Specification of Mobile Station (including Non UIM Mobile Station)
for 800MHz CDMA 1X Digital Cellular Mobile Telecommunication
Network. Part 1. Minimum Standard, Function and Performance
ISSUED ON. SEPTEMBER 19, 2006
IMPLEMENTED ON. SEPTEMBER 19, 2006
Issued by. Ministry of Industry Information Technology, the People’s
Republic of China
Table of Contents
Preface ... 6
1 Scope ... 8
2 Quoted Standards ... 8
3 Acronyms ... 9
4 Requirements and Test Methods for Service and Function of MS ... 9
4.1 Overview ... 9
4.2 Display Function ... 9
4.3 Dialing Function ... 13
4.4 Authentication Function ... 14
4.5 Chinese Language Support ... 15
4.6 Vocoder Support ... 16
4.7 Safety Feature of MS ... 16
4.8 Subscription Identification Management ... 16
4.9 Phonebook ... 17
4.10 Phonebook Selection for Message Delivery ... 17
4.11 Input Method ... 18
4.12 Data Interface ... 18
4.13 Storage Card Interface ... 18
4.14 Supplementary Service Operation & Control ... 19
4.15 Other Functions ... 20
5 Requirements and Test Methods for Receiver of MS... 21
5.1 Frequency Coverage Requirements ... 21
5.2 Acquisition Requirements ... 23
5.3 Forward Common Channel Demodulation Performance ... 49
5.4 Forward Traffic Channel Demodulation Performance ... 57
5.5 Receiver Performance ... 73
5.6 Receiver Spurious Emission ... 76
5.7 Supervision ... 78
6 Technical Requirements and Test Methods of MS Transmitter ... 81
6.1 Frequency Accuracy ... 81
6.2 Handover ... 81
6.3 Demodulation Requirements ... 86
6.4 RF Output Power Requirements ... 90
6.5 Tx Spurious Emission ... 113
7 MS Audio Performance Requirements and Measurement Methods ... 116
8 MS Environment Adaptability Requirements and Measurement Methods ... 116
9 Requirement of MS Standby Time and Talk Time and Test Method ... 116
9.1 MS Standby Time ... 116
9.2 MS Talk Time ... 117
10 MS Card Interface Requirements and Test Methods ... 119
11 Partial Requirements for Access Device with Card and Device Integrated and the One
with Card and Device Separated ... 119
12 Electromagnetic Compatibility (EMC) ... 119
13 Requirements of Specific Absorption Rate (SAR) ... 119
14 MS Power Supply and Charger Requirements and Measurement Methods ... 119
14.1 Battery Performance ... 119
14.2 Charger Safety ... 119
15 Exterior Packaging and Assembly Requirements and Measurement Methods ... 119
16 MS Test Conditions ... 120
16.1 Test Mode ... 120
16.2 Standard Environment Test Conditions ... 121
16.3 Test Configuration ... 121
Appendix A (Normative Appendix) Test Parameters and Performance Requirements for
Forward Traffic Channel Demodulation ... 125
A.1 Table of Forward Public Channel Performance ... 125
A.1.1 Performance Requirements for Paging Channel in Non-slotted Mode... 125
A.1.2 Performance Requirements for Paging Channel in Slotted Mode ... 125
A.1.3 Performance Requirements for Forward Broadcast Control Channel Demodulation in
AWGN Condition ... 127
A.1.4 Performance Requirements for Forward Broadcast Channel in Multi-path Fading
Condition ... 128
A.1.5 Performance Requirements for Forward Public Control Channel ... 140
A.1.6 Performance Requirements for Public Assignment Channel and Public Power Control
Channel ... 142
A.2 Performance Table for Forward Traffic Channel Demodulation ... 143
A.2.1 Performance Requirements for Forward Traffic Channel in AWGN Condition ... 143
A.2.2 Performance Requirements for Forward Traffic Channel in Multi-path Fading
Condition ... 167
A.2.3 Performance Requirements for Forward Basic Channel during Soft Handover ... 173
A.2.4 Performance Requirements for Power Control Bits Belonging to Various Power
Control Set during Soft Handover ... 174
A.2.5 Performance Requirements for Power Control Bits Belonging to Same Power Control
Set During Soft Handover ... 174
A.2.6 Performance Requirements for Power Control Sub-channel During Soft Handover 175
A.2.7 Performance Requirements for Demodulation of Forward Traffic Channel in
Multi-path Fading Channel with Closed Loop Power Control (FPC_MODE='000') ... 175
A.2.8 Performance Requirements for Demodulation of Forward Traffic Channel in
Multi-path Fading Channel with Closed Loop Power Control (FPC_MODE=“010”) ... 182
A.2.9 Performance Requirements for Demodulation of F...