HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

SN/T 3323.1-2012 PDF English

US$170.00 · In stock · Download in 9 seconds
SN/T 3323.1-2012: Mill scale. Part 1: Determination of ferrous oxide. Potassium dichromate titration
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
SN/T 3323.1-2012English170 Add to Cart 0-9 seconds. Auto-delivery Mill scale. Part 1: Determination of ferrous oxide. Potassium dichromate titration Valid

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: SN/T 3323.1-2012
      

Similar standards

YB/T 091   GB/T 20491   SN/T 3323.7   

SN/T 3323.1-2012: Mill scale. Part 1: Determination of ferrous oxide. Potassium dichromate titration


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/SNT3323.1-2012
ENTRY-EXIT INSPECTION AND QUARANTINE INDUSTRY STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA Mill scale - Part 1: Determination of ferrous oxide - Potassium dichromate titration ISSUED ON: DECEMBER 12, 2012 IMPLEMENTED ON: JULY 01, 2013 Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

Table of Contents

Foreword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Method summary ... 4 4 Reagents ... 4 5 Instruments and equipment ... 5 6 Specimen ... 5 7 Analysis steps ... 5 8 Result calculation ... 6 9 Precision ... 7 Annex A (normative) Determination of hygroscopic water in mill scale ... 8 Mill scale - Part 1: Determination of ferrous oxide - Potassium dichromate titration

1 Scope

This Part of SN/T 3323 specifies potassium dichromate titration, the method to determine the ferrous oxide content in mill scale. This Part is applicable to the determination of ferrous oxide content in mill scale. The determination range is 10%~60%.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 6682, Water for analytical laboratory use - Specification and test methods GB/T 6730.6-1986, Methods for chemical analysis of iron ores - The ferric chloride- sodium acetate volumetric method for the determination of metallic iron content GB/T 6730.7-1986, Methods for chemical analysis of iron ores - The sulfosalicylic acid photometric method for the determination of metallic iron content

3 Method summary

In the absence of air, use hydrochloric acid and sodium fluoride to decompose the specimen. Use sodium diphenylamine sulfonate as indicator. Determine ferrous and metallic iron content by potassium dichromate volumetric method. After subtracting the amount of metallic iron, the amount of ferrous iron is obtained.

4 Reagents

Unless otherwise stated, all reagents are analytically pure and above. Water is grade two water specified in GB/T 6682. 4.1 Sodium fluoride. 4.2 Sodium bicarbonate. 4.3 Hydrochloric acid (ρ=1.19g/mL). 4.4 Saturated sodium bicarbonate solution. 4.5 Mixed sulfuric acid: Put 200mL of sulfuric acid (ρ=1.84g/mL) under stirring, then pour into 500mL of water slowly. Then, add 300mL of phosphoric acid (ρ=l.70g/mL). Mix well. 4.6 Sodium diphenylamine sulfonate solution (2g/L): Weigh 0.2g of sodium diphenylamine sulfonate and dissolve in 100mL of water. 4.7 Potassium dichromate standard titration solution (0.0050mol/L): Weigh 1.4709g of potassium dichromate (reference reagent) that has been pre-dried at 150°C for 1h, and dissolve in water. Transfer into a 1000mL volumetric flask. Use water to dilute to the scale. Mix well. 4.8 Ferrous ammonium sulfate solution (about 0.03mol/L): Weigh 11.82g of ferrous ammonium sulfate [(NH4)2(SO4)2•6H2O] and dissolve in sulfuric acid (5+95). Transfer into a 1000mL volumetric flask. Use sulfuric acid (5+95) to dilute to the scale. Mix well.

5 Instruments and equipment

5.1 Balance: the sensitivity is 0.1mg. 5.2 Geiger funnel: 250mL.

6 Specimen

The specimen shall pass through the sieve mesh of 0.100mm.

7 Analysis steps

7.1 Test material Weigh about 0.15g of specimen (Chapter 6), accurate to 0.0001g. Weigh two portions of test material for parallel determination. Take the average value as the result. 7.2 Blank test Conduct the blank test, along with test material. 7.3 Determination ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of SN/T 3323.1-2012 be delivered?

Answer: The full copy PDF of English version of SN/T 3323.1-2012 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of SN/T 3323.1-2012_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 3323.1-2012_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- SN/T 3323.1-2012 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of SN/T 3323.1-2012?

A step-by-step guide to download PDF of SN/T 3323.1-2012_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "SN/T 3323.1-2012".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9