Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 169759 (Sep 12, 2021)
HOME   Quotation   Tax   Examples Standard-List   Contact-Us   Cart
  

QB/T 1130-1991 (QBT 1130-1991)

QB/T 1130-1991_English: PDF (QBT1130-1991)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)Related StandardStatusGoogle Book
QB/T 1130-1991English70 Add to Cart 0--10 minutes. Auto-delivered. Plastics Angle Tear Performance Test Method QB/T 1130-1991 QB/T 1130-1991
 

BASIC DATA
Standard ID QB/T 1130-1991 (QB/T1130-1991)
Description (Translated English) Plastics Angle Tear Performance Test Method
Sector / Industry Light Industry Industry Standard (Recommended)
Classification of Chinese Standard G31
Word Count Estimation 3,393
Date of Issue 1991/6/4
Date of Implementation 1992/1/1
Quoted Standard GB 1040; GB 2918; GB 6672
Adopted Standard JIS K6732-1987, NEQ
Drafting Organization Applied Science Institute of Light Industry Plastics Processing
Administrative Organization National Plastics Center for Standardization
Regulation (derived from) Industry-Science (2010) No.77
Summary This standard specifies the right angle tear the plastic film and sheeting performance test methods. This standard applies to plastic film, plastic sheets and other similar materials.

QB/T 1130-1991
QB
LIGHT INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
Plastics Angle Tear Performance Test Method
APPROVED ON: JUNE 04, 1991
IMPLEMENTED ON: JANUARY 01, 1992
Approved by: Ministry of Light Industry of PRC
Table of Contents
1 Theme Content and Applicable Scope ... 3
2 Normative References ... 3
3 Principle ... 3
4 Test Apparatus ... 3
5 Specimen ... 3
6 Standard Environment for Condition Adjustment and Test of Specimen ... 4
7 Test Procedures ... 4
8 Representation of the Results ... 5
9 Test Report ... 5
Additional Information: ... 6
Plastics Angle Tear Performance Test Method
1 Theme Content and Applicable Scope
This Standard specifies the test method for the right-angle tear performance of plastic
films and sheets.
This Standard is applicable to plastic films, sheets and other similar plastic materials.
2 Normative References
GB 1040 Plastics - Determination of Tensile Properties
GB 2918 Plastics - Standard Atmospheres for Conditioning and Testing
GB 6672 Determination of Thickness of Plastic Film and Sheeting by Mechanical
Scanning
3 Principle
Apply a tensile load to the standard specimen to make the specimen tear at the right-
angle mouth; and measure the tear load or tear strength of the specimen.
4 Test Apparatus
4.1 A tensile testing machine that meets the requirements of GB 1040 and can meet
the requirements of test speed.
4.2 A thickness measuring instrument that meets the requirements of GB 6672.
5 Specimen
5.1 The shape and size of the specimen are shown in the following Figure:
8 Representation of the Results
8.1 Take the maximum load value during the tearing process of the specimen as the
right-angle tearing load, in N.
8.2 The right-angle tear strength is calculated as follows:
Where:
σtr – right-angle tear strength, in kN/m;
P – tearing load, in N;
d – thickness of specimen, in mm.
8.3 The test results are expressed by the arithmetic mean of the right-angle tearing
load or right-angle tear strength of all specimens. The significant figures of the test
results are two digits or determined as per the product standard.
9 Test Report
The test report shall include the following:
a. The name and number of this Standard;
b. Description of sample type, production date, etc.;
c. The direction of the specimen: If necessary, indicate the thickness of each
specimen or overlapping specimen group, as well as the average thickness and
quantity of the specimen or overlapping specimen group;
d. If an overlapping specimen group is used, it shall be indicated;
e. Test result: If necessary, indicate the test result and standard deviation of a single
specimen;
f. Test date;
g. The cases that the specimens and tests are inconsistent with this Standard or
not specified in this Standard.
____________________