Q/BQB 410-2023 PDF English
US$315.00 · In stock · Download in 9 secondsQ/BQB 410-2023: Cold-rolled carbon structural steel sheet and strip Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureQ/BQB 410: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| Q/BQB 410-2023 | English | 315 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Cold-rolled carbon structural steel sheet and strip
| |
| Q/BQB 410-2019 | English | 170 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Cold-rolled Carbon Structural Steel Sheet and Strip
| |
| Q/BQB 410-2018 | English | 90 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Cold-rolled Carbon Structural Steel Sheet and Strip
| Obsolete |
| Q/BQB 410-2014 | English | 160 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Cold-rolled carbon structural steel and steel strip
| Obsolete |
| Q/BQB 410-2009 | English | 199 |
Add to Cart
|
2 days
|
Cold Rolled Carbon Structural Steel Plate and Strip
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: Q/BQB 410-2023
Q/BQB 410-2023: Cold-rolled carbon structural steel sheet and strip---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/QBQB410-2023
BQB
ENTERPRISE STANDARD OF
BAOSHAN IRON AND STEEL CO., LTD
Replacing Q/BQB 410-2019
Cold-Rolled Carbon Structural Steel Sheet and Strip
Issued on. APRIL 9, 2023
Implemented on. JULY 1, 2023
Issued by. Baoshan Iron and Steel Co., Ltd.
Table of Contents
Foreword... 3
1 Scope... 5
2 Normative References... 5
3 Terms and Definitions... 6
4 Classification and Code... 6
5 Information Required for Ordering... 7
6 Dimensions, Shape, Weight and Allowable Deviations... 7
7 Technical Requirements... 8
8 Inspection and Testing... 10
9 Packaging, Marking and Inspection Documents... 11
10 Rounding-off Rules for Numerical Values... 12
11 Similar Comparison of Designations... 12
Appendix A (Informative) Comparison List of Similar Designations between this
Document and Relevant Domestic/Foreign Standards... 13
Foreword
This Document was drafted as per the rules specified in GB/T 1.1-2020 Directives for
Standardization – Part 1.Rules for the Structure and Drafting of Standardizing Documents.
This Document was formulated by reference of DIN 1623.2009 and JFS A2001.2020.
This Document replaced Q/BQB 410-2019 Cold-rolled Carbon Structural Steel Sheet and Strip.
Compared with Q/BQB 410-2019, the major technical changes of this Document are as follows.
--- Revise the Normative References;
--- Revise the upper limit requirements of the Component-C of B240ZK and B280VK
designations in Table 4;
--- Revise the lower limit requirements of the Component-AL of the original designations
in Table 4;
--- Add the Designations Q235, Q275 and Q325 and related technical requirements;
--- Revise the tensile specimen provisions in Table 6, using the P17 specimen specified in
GB/T 228.1;
--- In 8.3 tensile test method, add the second-level rate requirement (original 7.3);
--- Revise Appendix A Comparison List of Approximate Designations of Relevant Domestic
and Foreign Standards;
--- Editorial modification of the document.
The Appendix A of this Document is informative.
This Document was proposed by Manufacturing and Management Department of Baoshan Iron
and Steel Co., Ltd.
This Document shall be under the jurisdiction of Manufacturing and Management Department
of Baoshan Iron and Steel Co., Ltd.
This Document was drafted by Manufacturing and Management Department of Baoshan Iron
and Steel Co., Ltd.
Chief drafting staffs of this Document. Yuan Min.
The historical editions replaced by this Document are as follows.
Q/BQB 410-1988, Q/BQB 410-1994, Q/BQB 410-1999, Q/BQB 410-2003, Q/BQB 410-2009.
Q/BQB 410-2014, Q/BQB 410-2018 and Q/BQB 410-2019.
Cold-Rolled Carbon Structural Steel Sheet and Strip
1 Scope
This Document specifies the terms and definitions, classification and code, size, shape, weight,
technical requirements, inspection and testing, packaging, marking and inspection documents
of cold-rolled carbon structural steel sheet and strip.
This Document applies to cold-rolled carbon structural steel sheet and strip (hereinafter referred
to as steel sheet and strip) with a thickness of 0.50mm ~ 3.5mm produced by Baoshan Iron &
Steel Co., Ltd.
2 Normative References
The provisions in following documents become the essential provisions of this Document
through reference in this Document. For the dated documents, only the versions with the dates
indicated are applicable to this Document; for the undated documents, only the latest version
(including all the amendments) is applicable to this Document.
GB/T 222 Permissible tolerances for chemical composition of steel products
GB/T 223 Methods for chemical analysis of iron, steel and alloy
GB/T 228.1-2021 Metallic materials - Tensile testing - Part 1.Method of test at room
temperature
GB/T 232 Metallic materials - Bend test
GB/T 2523 Measuring method of surface roughness and peak count for cold-rolled metal
sheet (strip)
GB/T 2975 Steel and Steel Products - Location and Preparation of Test Pieces for
Mechanical Testing
GB/T 4336 Carbon and low-alloy steel - Determination of multi-element contents - Spark
discharge atomic emission spectrometric method (routine method)
GB/T 8170 Rules of rounding off for numerical values & expression and judgement of
limiting values
3 Terms and Definitions
For the purposes of this Document, there are no terms and definitions apply.
4 Classification and Code
4.1 The classification of steel sheet and strip according to the use shall comply with the
provisions of Table 1.
Table 1
4.3 The classification of steel sheet and strip according to the surface structure shall comply
with the provisions of Table 3.
5 Information Required for Ordering
5.1 When ordering, the user shall provide the following information.
5.2 If the size, roughness accuracy, surface quality level, edge state and packaging method are
not specified in the ordering contract, this Standard product shall be supplied as trimmed steel
sheet or strip with ordinary size, roughness accuracy and Level-FB surface quality; and shall
be packaged in the packaging method provided by the supplier.
6 Dimensions, Shape, Weight and Allowable Deviations
The dimension, shape, weight and allowable deviations of steel sheet and strip shall comply
with the provisions of Q/BQB 401.
7 Technical Requirements
7.1 Chemical composition
7.1.1The chemical composition (melting analysis) of steel shall comply with the provisions of
Table 4.
7.2 Smelting method
The steel used for steel sheet and strip is smelted in an oxygen converter.
7.3 Delivery status
7.3.1 Steel sheet and strip are delivered after annealing and leveling after cold rolling.
7.4 Mechanical properties
7.4.1 The supplier guarantees that within 6 months from the date of completion of
manufacturing, the mechanical properties of steel sheet and strip shall comply with the
Designation Chemical composition (smelting analysis) % (mass fraction)
provisions of Tables 5 and 6, respectively. If the purchaser has special requirements for
mechanical properties, they shall be negotiated when placing an order.
7.5 Surface quality
7.5.1 The surface of steel sheet and strip shall not have holes, surface cracks, laminations and
other defects that are harmful to use.
7.5.2 The characteristics of each surface quality level of steel sheet and strip shall comply with
the provisions of Table 8.
7.6 Surface structure
When the surface structure is pitted (D), the average roughness Ra is controlled by
0.6μm< Ra≤1.9μm. If the purchaser has special requirements for roughness, it shall be
negotiated when ordering.
8 Inspection and Testing
8.1 The appearance of steel sheet and strip shall be inspected with the naked eye.
8.2 The size and shape of steel sheet and strip shall be measured with appropriate measuring
tools.
8.3 The tensile test shall be in accordance with Method-B of GB/T 228.1-2021.In order to
improve the reproducibility of the measurement results, it is recommended to use the beam
displacement rate control method.
8.4 Steel sheet and strip shall be inspected and accepted in batches. Each inspection batch shall
consist of steel sheet and strip of the same designation, specification and processing state of no
more than 30 tons. For steel strips weighing more than 30 tons, each steel coil shall constitute
an inspection batch.
8.5 The inspection items, number of specimens, sampling methods and test methods of each
batch of steel sheets and strips shall comply with the provisions of Table 9.
8.7 Reinspection
For tensile test, if a test result does not meet the requirements of this Standard, double the
number of specimens from the same batch shall be randomly selected for reinspecting the
unqualified item.
9 Packaging, Marking and Inspection Documents
The packaging, marking and inspection documents of steel sheet and strip shall comply with
the provisions of Q/BQB 400.If the purchaser has special requirements for packaging, it shall
be stated in the contract.
10 Rounding-off Rules for Numerical Values
Numerical values are determined by the rounding value comparison method, and numerical
rounding shall comply with the provisions of GB/T 8170.
11 Similar Comparison of Designations
The comparison list of similar designations between this Document And relevant domestic/
foreign standards is shown in Appendix A.
Appendix A
(Informative)
Comparison List of Similar Designations between this Document and
Relevant Domestic/Foreign Standards
Table A.1
Q/BQB 410-2023
BQB
ENTERPRISE STANDARD OF
BAOSHAN IRON AND STEEL CO., LTD
Replacing Q/BQB 410-2019
Cold-Rolled Carbon Structural Steel Sheet and Strip
Issued on. APRIL 9, 2023
Implemented on. JULY 1, 2023
Issued by. Baoshan Iron and Steel Co., Ltd.
Table of Contents
Foreword... 3
1 Scope... 5
2 Normative References... 5
3 Terms and Definitions... 6
4 Classification and Code... 6
5 Information Required for Ordering... 7
6 Dimensions, Shape, Weight and Allowable Deviations... 7
7 Technical Requirements... 8
8 Inspection and Testing... 10
9 Packaging, Marking and Inspection Documents... 11
10 Rounding-off Rules for Numerical Values... 12
11 Similar Comparison of Designations... 12
Appendix A (Informative) Comparison List of Similar Designations between this
Document and Relevant Domestic/Foreign Standards... 13
Foreword
This Document was drafted as per the rules specified in GB/T 1.1-2020 Directives for
Standardization – Part 1.Rules for the Structure and Drafting of Standardizing Documents.
This Document was formulated by reference of DIN 1623.2009 and JFS A2001.2020.
This Document replaced Q/BQB 410-2019 Cold-rolled Carbon Structural Steel Sheet and Strip.
Compared with Q/BQB 410-2019, the major technical changes of this Document are as follows.
--- Revise the Normative References;
--- Revise the upper limit requirements of the Component-C of B240ZK and B280VK
designations in Table 4;
--- Revise the lower limit requirements of the Component-AL of the original designations
in Table 4;
--- Add the Designations Q235, Q275 and Q325 and related technical requirements;
--- Revise the tensile specimen provisions in Table 6, using the P17 specimen specified in
GB/T 228.1;
--- In 8.3 tensile test method, add the second-level rate requirement (original 7.3);
--- Revise Appendix A Comparison List of Approximate Designations of Relevant Domestic
and Foreign Standards;
--- Editorial modification of the document.
The Appendix A of this Document is informative.
This Document was proposed by Manufacturing and Management Department of Baoshan Iron
and Steel Co., Ltd.
This Document shall be under the jurisdiction of Manufacturing and Management Department
of Baoshan Iron and Steel Co., Ltd.
This Document was drafted by Manufacturing and Management Department of Baoshan Iron
and Steel Co., Ltd.
Chief drafting staffs of this Document. Yuan Min.
The historical editions replaced by this Document are as follows.
Q/BQB 410-1988, Q/BQB 410-1994, Q/BQB 410-1999, Q/BQB 410-2003, Q/BQB 410-2009.
Q/BQB 410-2014, Q/BQB 410-2018 and Q/BQB 410-2019.
Cold-Rolled Carbon Structural Steel Sheet and Strip
1 Scope
This Document specifies the terms and definitions, classification and code, size, shape, weight,
technical requirements, inspection and testing, packaging, marking and inspection documents
of cold-rolled carbon structural steel sheet and strip.
This Document applies to cold-rolled carbon structural steel sheet and strip (hereinafter referred
to as steel sheet and strip) with a thickness of 0.50mm ~ 3.5mm produced by Baoshan Iron &
Steel Co., Ltd.
2 Normative References
The provisions in following documents become the essential provisions of this Document
through reference in this Document. For the dated documents, only the versions with the dates
indicated are applicable to this Document; for the undated documents, only the latest version
(including all the amendments) is applicable to this Document.
GB/T 222 Permissible tolerances for chemical composition of steel products
GB/T 223 Methods for chemical analysis of iron, steel and alloy
GB/T 228.1-2021 Metallic materials - Tensile testing - Part 1.Method of test at room
temperature
GB/T 232 Metallic materials - Bend test
GB/T 2523 Measuring method of surface roughness and peak count for cold-rolled metal
sheet (strip)
GB/T 2975 Steel and Steel Products - Location and Preparation of Test Pieces for
Mechanical Testing
GB/T 4336 Carbon and low-alloy steel - Determination of multi-element contents - Spark
discharge atomic emission spectrometric method (routine method)
GB/T 8170 Rules of rounding off for numerical values & expression and judgement of
limiting values
3 Terms and Definitions
For the purposes of this Document, there are no terms and definitions apply.
4 Classification and Code
4.1 The classification of steel sheet and strip according to the use shall comply with the
provisions of Table 1.
Table 1
4.3 The classification of steel sheet and strip according to the surface structure shall comply
with the provisions of Table 3.
5 Information Required for Ordering
5.1 When ordering, the user shall provide the following information.
5.2 If the size, roughness accuracy, surface quality level, edge state and packaging method are
not specified in the ordering contract, this Standard product shall be supplied as trimmed steel
sheet or strip with ordinary size, roughness accuracy and Level-FB surface quality; and shall
be packaged in the packaging method provided by the supplier.
6 Dimensions, Shape, Weight and Allowable Deviations
The dimension, shape, weight and allowable deviations of steel sheet and strip shall comply
with the provisions of Q/BQB 401.
7 Technical Requirements
7.1 Chemical composition
7.1.1The chemical composition (melting analysis) of steel shall comply with the provisions of
Table 4.
7.2 Smelting method
The steel used for steel sheet and strip is smelted in an oxygen converter.
7.3 Delivery status
7.3.1 Steel sheet and strip are delivered after annealing and leveling after cold rolling.
7.4 Mechanical properties
7.4.1 The supplier guarantees that within 6 months from the date of completion of
manufacturing, the mechanical properties of steel sheet and strip shall comply with the
Designation Chemical composition (smelting analysis) % (mass fraction)
provisions of Tables 5 and 6, respectively. If the purchaser has special requirements for
mechanical properties, they shall be negotiated when placing an order.
7.5 Surface quality
7.5.1 The surface of steel sheet and strip shall not have holes, surface cracks, laminations and
other defects that are harmful to use.
7.5.2 The characteristics of each surface quality level of steel sheet and strip shall comply with
the provisions of Table 8.
7.6 Surface structure
When the surface structure is pitted (D), the average roughness Ra is controlled by
0.6μm< Ra≤1.9μm. If the purchaser has special requirements for roughness, it shall be
negotiated when ordering.
8 Inspection and Testing
8.1 The appearance of steel sheet and strip shall be inspected with the naked eye.
8.2 The size and shape of steel sheet and strip shall be measured with appropriate measuring
tools.
8.3 The tensile test shall be in accordance with Method-B of GB/T 228.1-2021.In order to
improve the reproducibility of the measurement results, it is recommended to use the beam
displacement rate control method.
8.4 Steel sheet and strip shall be inspected and accepted in batches. Each inspection batch shall
consist of steel sheet and strip of the same designation, specification and processing state of no
more than 30 tons. For steel strips weighing more than 30 tons, each steel coil shall constitute
an inspection batch.
8.5 The inspection items, number of specimens, sampling methods and test methods of each
batch of steel sheets and strips shall comply with the provisions of Table 9.
8.7 Reinspection
For tensile test, if a test result does not meet the requirements of this Standard, double the
number of specimens from the same batch shall be randomly selected for reinspecting the
unqualified item.
9 Packaging, Marking and Inspection Documents
The packaging, marking and inspection documents of steel sheet and strip shall comply with
the provisions of Q/BQB 400.If the purchaser has special requirements for packaging, it shall
be stated in the contract.
10 Rounding-off Rules for Numerical Values
Numerical values are determined by the rounding value comparison method, and numerical
rounding shall comply with the provisions of GB/T 8170.
11 Similar Comparison of Designations
The comparison list of similar designations between this Document And relevant domestic/
foreign standards is shown in Appendix A.
Appendix A
(Informative)
Comparison List of Similar Designations between this Document and
Relevant Domestic/Foreign Standards
Table A.1
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of Q/BQB 410-2023 be delivered?Answer: The full copy PDF of English version of Q/BQB 410-2023 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of Q/BQB 410-2023_English with my colleagues?Answer: Yes. The purchased PDF of Q/BQB 410-2023_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- Q/BQB 410-2023 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version Q/BQB 410-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version Q/BQB 410-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of Q/BQB 410-2023?A step-by-step guide to download PDF of Q/BQB 410-2023_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "Q/BQB 410-2023".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |