HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

Q/BQB 419-2023 PDF English

US$415.00 · In stock · Download in 9 seconds
Q/BQB 419-2023: Cold-rolled conventional high strength steel sheet and strip
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure

Q/BQB 419: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
Q/BQB 419-2023English415 Add to Cart 0-9 seconds. Auto-delivery Cold-rolled conventional high strength steel sheet and strip
Q/BQB 419-2021English190 Add to Cart 0-9 seconds. Auto-delivery Cold-rolled conventional high strength steel sheet and strip
Q/BQB 419-2019English210 Add to Cart 0-9 seconds. Auto-delivery Cold-rolled Ordinary High Strength Steel Sheet and Strip
Q/BQB 419-2018English130 Add to Cart 0-9 seconds. Auto-delivery Cold-rolled Ordinary High Strength Steel Sheet and Strip Obsolete
Q/BQB 419-2014English220 Add to Cart 0-9 seconds. Auto-delivery Cold-rolled ordinary high-strength steel plate and strip Obsolete
Q/BQB 419-2009English239 Add to Cart 3 days Low Alloy High Strength Cold Rolled Steel Plate and Strip Obsolete

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: Q/BQB 419-2023
      

Similar standards

Q/BQB 418   NMPA RULES66   Q/BQB 420   

Q/BQB 419-2023: Cold-rolled conventional high strength steel sheet and strip

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/QBQB419-2023
BQB® ENTERPRISE STANDARD OF BAOSHAN IRON & STEEL CO., LTD. Replacing Q/BQB 419-2021 Cold-rolled conventional high strength steel sheet and strip Issued on: APRIL 09, 2023 Implemented on: JULY 01, 2023 Issued by. Baoshan Iron & Steel Co., Ltd.

Table of Contents

Foreword... 3 1 Scope... 5 2 Normative references... 5 3 Terms and definitions... 6 4 Category and code... 7 5 Information required for ordering... 8 6 Dimensions, shape, weight, tolerance... 9 7 Technical requirements... 9 8 Inspection and test... 14 9 Packaging, marking, inspection documents... 15 10 Numerical rounding rules... 15 11 Approximate comparison of designations... 15 Appendix A (Informative) Comparison of similar designations between this document and relevant domestic and foreign standards... 16

Foreword

This document was drafted in accordance with the provisions of GB/T 1.1-2020 "Directives for standardization - Part 1.Rules for the structure and drafting of standardizing documents". This document was compiled, with reference to EN 10268.2006+A1.2013 and VDA 239-100.2016. This document replaces Q/BQB 419-2021 "Cold-rolled conventional high strength steel sheet and strip". Compared with Q/BQB 419-2021, the main technical changes of this document are as follows. - REVISE the normative references, deleting the reference of JIS Z 2241; - ADD the designations of HC650LA, HC750LA, HC850LA, HC900LA, as well as the corresponding components and technical requirements; - DELETE the designations of B180P2, B220P2, HC260P, HC300P, HC220I, HC260I; - MODIFY the upper limit value of S component of the designations B140H1 and B180H1 in Table 4, from 0.020% to 0.025%; - MODIFY the lower limit of Al component of each designation in Table 4, from 0.015% to 0.010%; - MODIFY the upper limit of P component of designations HC260LA ~ HC550LA in Table 4, from 0.025% to 0.030%; MODIFY the upper limit of S component of designations B340LA and B410LA grades, from 0.030% to 0.025%; - ADD the specified requirements for the n value of low-alloy steel, to the notes in Table 5; - MODIFY the provisions on tensile test specimens in note b of Tables 6 and 7, uniformly adopting the P17 specimens, which are specified in GB/T 228.1; - MODIFY the requirements for tensile strain marks in Clause 7.5; - In 8.3 tensile test method, ADD the second-level speed requirement; - CHANGE the expression in clause 8.4 "Description of r-value and n-value detection methods"; - REVISE the Appendix A -- Comparison of similar designations in relevant domestic and foreign standards; - Editorial changes. Appendix A of this document is an informative appendix. This document was proposed by the Manufacturing Management Department of Baoshan Iron & Steel Co., Ltd. This document shall be under the jurisdiction of the Manufacturing Management Department of Baoshan Iron & Steel Co., Ltd. This document was drafted by the Manufacturing Management Department of Baoshan Iron & Steel Co., Ltd. The main drafter of this document. Yuan Min. The release status of previous versions of this document and the documents it replaces are as follows. - Q/BQB 419-1999, Q/BQB 419-2003, Q/BQB 419-2009, Q/BQB 419-2014, Q/BQB 419-2018, Q/BQB 419-2019, Q/BQB 419-2021. Cold-rolled conventional high strength steel sheet and strip

1 Scope

This document specifies the terms and definitions, classification and code, size, shape, weight, technical requirements, inspection and test, packaging, marking and inspection documents of cold-rolled conventional high-strength steel sheets and strips. This document applies to cold-rolled conventional high-strength steel sheets and strips (hereinafter referred to as steel sheets and strips), which have a thickness of 0.40 mm ~ 3.5 mm, as produced by Baoshan Iron and Steel Co., Ltd.

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, for the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) is applicable to this standard. GB/T 222 Method of sampling steel for determination of chemical composition and permissible variations for product analysis GB/T 223 Methods for chemical analysis of iron, steel and alloy GB/T 228.1-2021 Metallic materials - Tensile testing - Part 1.Method of test at room temperature GB/T 2523 Measuring method of surface roughness, peak count and waviness for cold-rolled metal sheet and strip GB/T 2975 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing GB/T 4336 Carbon and low-alloy steel - Determination of multi-element contents - Spark discharge atomic emission spectrometric method (routine method) GB/T 5027 Metallic materials - Sheet and strip - Determination of plastic strain ratio GB/T 5028 Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent GB/T 8170 Rules of rounding off for numerical values & expression and judgement of limiting values

3 Terms and definitions

3.1 Rephoshorized steels (P) In low carbon steel or ultra-low carbon steel, the strength of steel is mainly increased, by adding solid solution strengthening elements, such as phosphorus, which does not exceed 0.12%. This steel has high strength and good cold-forming properties, as well as good impact resistance and fatigue resistance; it is usually used in the production of automotive panels and structural parts. 3.2 High strength interstitial free steels (Y) The plastic strain ratio (r value) and strain hardening exponent (n value) of the steel are improved, by controlling the chemical components in the steel. Due to the solid solution strengthening of the elements in the steel and the interstitial free microstructure, this steel combines high strength with very good cold formability; it is usually used to make complex parts, that require deep drawing. 3.3 Bake hardening steels (B) A certain amount of solid solution carbon and nitrogen atoms are retained in the steel, meanwhile strengthening elements such as phosphorus and manganese can be added to increase the strength. After processing and forming, after baking at a certain temperature, the yield strength of the steel is further increased due to age hardening. It is typically applied to automotive exterior panels. 3.4 High strength low alloy steels (LA) In low carbon steel, by single or composite addition of niobium, titanium, vanadium and other microalloying elements, carbonitride particles are precipitated for strengthening; at the same time, the grain refinement of microalloying elements is adopted to obtain higher strength.

4 Category and code

4.1 Steel sheets and steel strips shall comply with the requirements in Table 1, according to their application. 4.2 Steel sheets and steel strips shall conform to the provisions in Table 2, according to their surface quality. 4.3 Steel sheets and steel strips shall comply with the provisions in Table 3, according to the surface structure.

5 Information required for ordering

5.1 The user shall provide the following information when ordering. a) Product name (steel sheet or steel strip); b) The enterprise standard number of this document; c) Designation; d) Product specifications and dimensions, roughness accuracy; e) Greasing requirements; f) Edge states; g) Surface quality level; h) Surface structure; i) Packing method; j) Application; k) Other.

6 Dimensions, shape, weight, tolerance

The size, shape, weight, tolerance of steel sheets and strips shall comply with the provisions of Q/BQB 401.

7 Technical requirements

7.1 Chemical composition 7.1.1 The chemical composition (smelting analysis) of the steel shall meet the requirements in Table 4. 7.1.2 The tolerance of the chemical composition of the finished steel sheet and steel strip shall comply with the provisions of GB/T 222. 7.2 Smelting method The steel used for steel sheets and strips is smelted in an oxygen converter. 7.3 Delivery status 7.3.1 Steel sheets and strips are delivered, after cold rolling, annealing, leveling. 7.3.2 Steel sheets and steel strips are usually supplied after greasing. The grease film shall be able to be removed, by alkaline aqueous solution. Under normal packaging, transportation, loading and unloading, storage conditions, the supplier shall guarantee that the surface of the steel sheet and steel strip will not rust, within 6 months from the date of completion of manufacture. According to the requirements of the buyer, it can also be supplied without grease, after reaching agreement between the supplier and the buyer AND specified in the contract. For defects such as rust, scratches and friction marks, which are caused by non-greased products during handling, storage and use, the supplier will not be responsible for the corresponding product quality. 7.4 Mechanical properties 7.4.1 The supplier guarantees that within 6 months from the date of completion of manufacture, the mechanical properties of steel sheets and strips shall comply with the corresponding provisions in Table 5, Table 6, Table 7. 7.4.2 When steel sheets and steel strips are supplied as specified parts, the supplier and the purchaser can agree on a range of mechanical properties, that meets the processing requirements of the parts, as the acceptance benchmark. At this time, the mechanical properties, which are specified in Table 5, Table 6, Table 7, will not be used as a basis for delivery. 7.4.3 Due to the influence of aging, the mechanical properties of steel sheets and steel strips will deteriorate, with the prolongation of storage time, such as the increase of yield strength and tensile strength, the decrease of elongation at break, the deterioration of formability, the appearance of tensile strain marks, etc. So, it is recommended that users use it as soon as possible. 7.5 Tensile strain marks 7.6 Surface quality 7.6.1 There shall be no holes, surface cracks, laminations, or other harmful defects on the surface of steel sheets and steel strips. 7.6.2 The characteristics of each surface quality level of steel sheets and strips shall comply with the provisions in Table 8.For high-strength low-alloy steel, the applicable surface quality level code is FB. 7.7 Surface structure 7.7.1 The average surface roughness of steel sheets and strips shall be controlled, according to the requirements in Table 9. 7.7.2 Surface structure suitable for environmental coating (BAOTEXTM) BAOTEXTM products can meet the technical requirements of advanced environmental protection coating technology. If users have needs, they can be negotiated when ordering. 7.7.3 Surface structure with high corrosion resistance (N or C) The product can meet higher technical requirements for corrosion resistance. If the user has requirement, it can be negotiated when ordering.

8 Inspection and test

8.1 The appearance of steel sheets and strips shall be inspected with naked eyes. 8.2 The size and shape of steel sheets and strips shall be measured, by appropriate measuring tools. 8.3 The tensile test shall be in accordance with method B of GB/T 228.1-2021.In order to improve the reproducibility of the measurement results, it is recommended to adopt the beam displacement rate control method; the beam displacement rate for determining the yield strength is 0.00083 × Lc (mm/s) (Lc is the parallel length of the tensile specimen, in mm, the same as below) or 0.05 × Lc (mm/min); after the yield strength is measured, the beam displacement rate is 0.0067 × Lc (mm/s) or 0.4 × Lc (mm/min). 8.5 The steel sheets and strips shall be inspected and accepted in batches. Each inspection batch shall consist of not more than 30 tons of steel sheets and strips of the same designation, specification, processing status. For steel strips weighing more than 30 tons, each coil constitutes an inspection batch. 8.6 The inspection items, specimen quantity, sampling method, test method of each batch of steel sheets and strips shall comply with the provisions in Table 10. 8.7 The supplier may use different inspection and test methods for acceptance test. In case of disputes, the inspection and test methods, which are specified in this document and relevant technical requirements, shall be used for test. 8.8 Retest For tensile, strain hardening exponent (n value), plastic strain ratio (r value), BH2 test, if any of the test results do not meet the requirements of this document, it shall take double number of specimens randomly from the same batch, for re-test of the unqualified item. If the re-test results (including all the indicators required by the item test) are qualified, the whole batch is qualified. Even if one indicator fails in the retest results (including all the indicators required by the item test), the retest is unqualified. If the re-test fails, the single piece that has been tested and the test result is unsatisfactory cannot be accepted; however, the single piece that has not been tested in this batch of materials can be resubmitted for test and acceptance one by one.

9 Packaging, marking, inspection documents

The packaging, marking, inspection documents of steel sheets and strips shall comply with the provisions of Q/BQB 400.If the buyer has special requirements for packaging, it shall be indicated in the contract.

10 Numerical rounding rules

The rounding off value comparison method is adopted for numerical determination. The rounding off of numerical values shall comply with the provisions of GB/T 8170.

11 Approximate comparison of designations

See Appendix A, for a comparison of similar designations between this document and relevant domestic and foreign standards. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of Q/BQB 419-2023 be delivered?

Answer: The full copy PDF of English version of Q/BQB 419-2023 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of Q/BQB 419-2023_English with my colleagues?

Answer: Yes. The purchased PDF of Q/BQB 419-2023_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- Q/BQB 419-2023 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version Q/BQB 419-2023?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version Q/BQB 419-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of Q/BQB 419-2023?

A step-by-step guide to download PDF of Q/BQB 419-2023_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "Q/BQB 419-2023".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9