HOME   Cart(1)   Quotation   About-Us Tax PDFs Standard-List
Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 189760 (28 Jan 2023)

JB/T 4129-1999 (JBT 4129-1999)

JB/T 4129-1999_English: PDF (JBT4129-1999)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)Related StandardStatusPDF
JB/T 4129-1999English70 Add to Cart 0--3 minutes. Auto-delivered. Burr height standard for stampings JB/T 4129-1999   JB/T 4129-1999

Standard ID JB/T 4129-1999 (JB/T4129-1999)
Description (Translated English) Burr height standard for stampings
Sector / Industry Mechanical & Machinery Industry Standard (Recommended)
Classification of Chinese Standard J32
Classification of International Standard 25.020
Word Count Estimation 5,558
Date of Issue 1999-06-24
Date of Implementation 2000-01-01
Older Standard (superseded by this standard) JB 4129-1985
Drafting Organization Fourth State Administration of Machinery Industry Design and Research Institute
Administrative Organization Forging the National Standardization Technical Committee
Summary This standard applies: there are certain requirements for burr height metal stamping products. This standard does not apply to the special requirements for the glitch finished parts and precision stamping parts. The criteria listed stamping tolerance values ??- the concept is not allowed -. However, generally come with varying degrees of stampings burr, burr height exceeds a certain limit, would affect the product quality and performance.

JB/T 4129-1999
ICS 25.020
J 32
Burr height standard for stampings
ISSUED ON. JUNE 24, 1999
Issued by. State Bureau of Machinery Industry, PRC
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Definitions ... 4
3 Limits of burr’s height ... 4
4 Testing ... 5
This Standard is equivalent to DIN 9830 "Burr height standard for stampings".
This Standard is the revised standard of JB 4129-85 " Burr height standard for
stampings". After discussion and comments, according to the representatives’ views,
the limits of burr height standard for stampings of sheet thickness ≤ 0.1 mm and > 0.1
~ 0.2 mm - have been modified appropriately. And it also makes editorial changes to
the previous standard.
This Standard replaces JB 4129-85 from the date of implementation.
This Standard was proposed and administered by the National Forging
Standardization Technical Committee.
This Standard was drafted by organization. The 4th Design Institute, State Bureau of
Machinery Industry.
Drafter of this Standard. Chen Hongfang.
Burr height standard for stampings
1 Scope
The value listed in this Standard are conceptually not allowed in the stamping
tolerance. However, general stamping parts come with varying degrees of burrs.
When the burr’s height exceeds a certain limit, it will affect the product quality and
usage performance.
This Standard applies to the finished metal stamping parts which have certain
requirements for burr’s height. It does not apply to the finished parts and precision
stamping parts which have special requirements for burrs.
2 Definitions
This Standard adopts the following definitions.
2.1 Burr’s height for stamping
Burr height for stamping refers to those left-over burrs on the section openings of the
finished stamping parts, when the material is stamped. It is shown in Figure 1.
Blanking stamping section Hole-punching section
h – Burr’s height;
t - Material thickness of the stamping part;
Figure 1
3 Limits of burr’s height
Limits of stamping burr’s height shall be specified in Table 1.