GB/T 9865.1-1996 PDF English
US$350.00 · In stock · Download in 9 secondsGB/T 9865.1-1996: Rubber, vulcanized or thermoplastic--Preparation of samples and test pieces--Part 1: Physical tests Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Obsolete GB/T 9865.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 9865.1-1996 | English | 350 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Rubber, vulcanized or thermoplastic--Preparation of samples and test pieces--Part 1: Physical tests
| Obsolete |
| GB 9865-1988 | English | 199 |
Add to Cart
|
2 days
|
Rubber, vulcanized--Preparation of samples and test pieces
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 9865.1-1996
GB/T 9865.1-1996: Rubber, vulcanized or thermoplastic--Preparation of samples and test pieces--Part 1: Physical tests
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT9865.1-1996
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 83.040.01
G 40
idt ISO 4661-1.1993
Replacing GB 9865-88
Rubber, vulcanized or thermoplastic - Preparation of
samples and test pieces - Part 1.Physical tests
[Replaced (Replaced by GB/T 2941-2006)]
Issued on. OCTOBER 28, 1996
Implemented on. JUNE 01, 1997
Issued by. State Bureau of Quality and Technical Supervision
Table of Contents
Foreword... 3
ISO Foreword... 4
ISO Introduction... 5
1 Scope... 6
2 Normative references... 6
3 Test piece thickness... 6
4 Thickness adjustment... 7
5 Conditioning of test pieces... 9
6 Test piece cutters... 9
Foreword
This Standard is modified from GB 9865-88 according to Part 1 Physical tests of the
international standard ISO 4661-1.1993 Rubber, vulcanized or thermoplastic -
Preparation of samples and test pieces. It is equivalent to it in terms of technical content
and writing rules. According to the provisions of GB/T 1.1-1993, a foreword is added
to this Standard, while the ISO foreword and introduction are retained.
ISO 4661 is divided into two parts under the general title, and Part 1.Physical tests is
adopted for this reversion.
This second edition cancels and replaces the first edition (GB 9865-88), of which it
constitutes a minor editorial revision.
This Standard replaces GB 9865-88 from the date of implementation.
This Standard was proposed by the Ministry of Chemical Industry of the People’s
Republic of China.
This Standard shall be under the jurisdiction of Beijing Rubber Industry Research and
Design Institute of the Ministry of Chemical Industry of the People’s Republic of China.
The drafting organization of this Standard. Beijing Rubber Industry Research and
Design Institute of the Ministry of Chemical Industry.
The drafters of this Standard. Shen Hui, Mei Fengguo, Zhang Juxiu.
Date of first issue of this Standard. July 1988.
This Standard is entrusted to the Beijing Rubber Industry Research and Design Institute
of the Ministry of Chemical Industry for interpretation.
ISO Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national standards bodies (ISO member bodies). The work of preparing International
Standards is normally carried out through ISO technical committees. Each member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates
closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the
member bodies for voting. Publication as an International Standard requires approval
by at least 75 % of the member bodies casting a vote.
International Standard ISO 4661-1 was prepared by Technical Committee ISO/TC 45,
Rubber and rubber products, Sub-Committee SC 2, Physical and degradation tests.
This second edition cancels and replaces the first edition (ISO 4661-1.1986), of which
it constitutes a minor editorial revision.
ISO 4661 consists of the following parts, under the general title Rubber, vulcanized or
thermoplastic - Preparation of samples and test pieces.
Part 1.Physical tests
Part 2.Chemical tests
1 Scope
Part 1 of this Standard specifies methods of preparing test pieces from vulcanized and
thermoplastic rubber for use in physical tests on rubber specified in other standards.
2 Normative references
The following standards contain provisions which, through reference in this text,
constitute provisions of this Standard. At the time of publication, the editions indicated
were valid. All Standards are subject to revision, and parties to agreements based on
this Standard are encouraged to investigate the possibility of applying the most recent
editions of the standards indicated below.
3 Test piece thickness
The test piece thickness shall be as specified in the relevant test method. However, it is
recommended that the following test piece thicknesses be used for specially moulded
test sheets for all tests unless other thicknesses are technically necessary.
4 Thickness adjustment
Material requiring testing, particularly products, may not be available in the required
thicknesses specified in clause 3, so that procedures are required to adjust the thickness
to within the prescribed limits. In most cases, the thickness adjustments shall be made
on the material before the cutting of the test pieces.
5 Conditioning of test pieces
After carrying out any of the procedures recommended in Clause 4, test pieces shall be
conditioned for at least 16 h at a standard temperature as specified in GB 2941.
6 Test piece cutters
These shall be constructed from high-quality tool steel and may either be constructed
from solid metal or be of split construction. Cutters may be designed to punch out single
Inside surface of cutter
The cutting of a test piece is facilitated by the use of a lubricant either on the cutting
knife or on the surface of the rubber.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 9865.1-1996 be delivered?Answer: The full copy PDF of English version of GB/T 9865.1-1996 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 9865.1-1996_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 9865.1-1996_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 9865.1-1996 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 9865.1-1996?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9865.1-1996 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 9865.1-1996?A step-by-step guide to download PDF of GB/T 9865.1-1996_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 9865.1-1996".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|