Path:
Home >
GB/T >
Page478 > GB/T 9754-2025
Home >
Standard_List >
GB/T >
Page478 > GB/T 9754-2025
GB/T 9754-2025 PDF English
GB/T 9754: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 9754-2025 | English | 440 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Paints and varnishes - Determination of gloss value at 20-degree, 60-degree and 85-degree
| Valid |
| GB/T 9754-2007 | English | 234 |
Add to Cart
|
3 days
|
Paints and varnishes -- Determination of specular gloss of non-metallic paint films at 20-degree, 60-degreeand 85-degree
| Valid |
| GB/T 9754-1988 | English | 319 |
Add to Cart
|
3 days
|
Paints and varnishes--Measurement of specular gloss of non-metallic paint films at 20 Degree, 60 Degree and 85 Degree
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)
PDF Preview: GB/T 9754-2025
GB/T 9754-2025: Paints and varnishes - Determination of gloss value at 20-degree, 60-degree and 85-degree
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT9754-2025
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 87.040
CCS G 50
GB/T 9754-2025 / ISO 2813.2014
Replacing GB/T 9754-2007
Paints and Varnishes – Determination of Gloss Value at 20°,
60° and 85°
(ISO 2813.2014, IDT)
Issued on: JUNE 30, 2025
Implemented on: JANUARY 1, 2026
Issued by. State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword... 4
1 Scope... 6
2 Normative References... 6
3 Terms and Definitions... 6
4 Principle... 7
5 Basic Principles of the Gloss Measurement... 8
6 Apparatus and Calibration Equipment... 10
6.1 Glossmeter... 10
6.2 Measurement standards (certified reference material, working measurement standards)
... 12
7 Test Panels... 14
7.1 Substrate... 14
7.2 Preparation and coating... 14
7.3 Drying and conditioning... 14
7.4 Thickness of coating... 14
8 Calibration and Adjustment of the Glossmeter... 14
8.1 Preparation of the apparatus... 14
8.2 Zero point check... 14
8.3 Calibration and adjustment... 15
9 Operating Procedures... 15
9.1 Selection of geometry... 15
9.2 Gloss measurement... 15
10 Precision... 16
10.1 General... 16
10.2 Repeatability limit... 16
10.3 Reproducibility limit... 16
11 Test Report... 17
Annex A (Normative) Possible Sources of Error... 18
A.1 General... 18
A.2 Topographical effects... 18
A.3 Geometrical effects... 18
A.4 Optical effects... 19
Foreword
This Document was drafted as per the rules specified in GB/T 1.1-2020 Directives for
Standardization – Part 1.Rules for the Structure and Drafting of Standardizing Documents.
This Document replaced GB/T 9754-2007 Paints and Varnishes - Determination of Specular
Gloss of Non-Metallic Paint Films at 20° 60°and 85°. Compared with GB/T 9754-2007, the
major technical changes of this Document are as follows besides structural adjustments and
editorial modifications.
a) Change the “Scope” (see Clause 1 of this Edition; Clause 1 of the 2007 Edition);
b) Change the “Terms and Definitions” (see Clause 3 of this Edition; Clause 3 of the 2007
Edition);
c) Delete “Sampling”, “Sampling of Painted Substrates”, and “Preparation of Test Panels”
(see Clauses 6, 7, and 8 of the 2007 Edition);
d) Add “Principles” and “Basic Principles of Gloss Measurement” (see Clauses 4 and 5 of
this Edition);
e) Change the “Instruments and Calibration Equipment” (see Clause 6 of this Edition;
Clause 5 of the 2007 Edition);
f) Add “Test Panels” (see Clause 7 of this Edition);
g) Change the “Calibration and Adjustment of Gloss Meters” (see Clause 8 of this Edition;
Clause 9 of the 2007 Edition);
h) Change the “Operating Procedures” (see Clause 9 of this Edition; Clause 10 of the 2007
Edition);
i) Change the “Precision” (see Clause 10 of this Edition; Clause 11 of the 2007 Edition);
j) Change the “Test Report” (see Clause 11 of this Edition; Clause 12 of the 2007 Edition);
k) Add normative annexes on “Possible Sources of Error” and “Calibration Standards”
(see Annexes A and B of this Edition).
This Document equivalently adopted ISO 2813.2014 Paints and Varnishes - Determination of
Gloss Value at 20°, 60° and 85°.
Please note some contents of this Document may involve patents. The issuing agency of this
Document shall not assume the responsibility to identify these patents.
This Document was proposed by China Petroleum and Chemical Industry Federation.
Paints and Varnishes – Determination of Gloss Value at 20°,
60° and 85°
1 Scope
This Document specifies a method for determining the gloss of coatings using the three
geometries of 20°, 60° or 85°.
The Document is suitable for the gloss measurement of non-textured coatings on plane, opaque
substrates.
NOTE. On test specimens different from these mentioned above, comparative gloss measurements are
possible. However, it is not ensured that the obtained gloss values correspond to the visual gloss
perception (see Annex A).
2 Normative References
The provisions in following documents become the essential provisions of this Document
through reference in this Document. For the dated documents, only the versions with the dates
indicated are applicable to this Document; for the undated documents, only the latest version
(including all the amendments) is applicable to this Document.
ISO 1514 Paint and varnishes – Standard panels for testing
NOTE. GB/T 9271-2008 Paints and varnishes standard panels for testing (ISO 1514.2004, MOD)
ISO 2808 Paints and varnishes – Determination of film thickness
NOTE. GB/T 13452.2-2008 Paints and varnishes - Determination of film thickness (ISO 2808.2007,
IDT)
ISO 4618 Paints and varnishes – Terms and definitions
NOTE. GB/T 5206-2015 Paints and varnishes - Terms and definitions (ISO 4618.2014, IDT)
3 Terms and Definitions
For the purposes of this Document, the terms and definitions given in ISO 4618 and the
following apply.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Price & Delivery
US$440.00 · In stock · Download in 9 secondsGB/T 9754-2025: Paints and varnishes - Determination of gloss value at 20-degree, 60-degree and 85-degree
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See
step-by-step procedureStatus: Valid
Tips & Frequently Asked Questions
Question 1: How long will the true-PDF of English version of GB/T 9754-2025 be delivered?
Answer: The full copy PDF of English version of GB/T 9754-2025 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.
Question 2: Can I share the purchased PDF of GB/T 9754-2025_English with my colleagues?
Answer: Yes. The purchased PDF of GB/T 9754-2025_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.
Question 3: Does the price include tax/VAT?
Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs):
List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?
Answer: Yes.
www.ChineseStandard.us -- GB/T 9754-2025 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.
Question 5: Should I purchase the latest version GB/T 9754-2025?
Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9754-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.