GB/T 908-2019 PDF English
US$145.00 · In stock · Download in 9 secondsGB/T 908-2019: Forged bars for dimensions, shape, weight and tolerances Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 908: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 908-2019 | English | 145 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Forged bars for dimensions, shape, weight and tolerances
| Valid |
| GB/T 908-2008 | English | 359 |
Add to Cart
|
3 days
|
Forged bars -- Dimensions, shape, weight and tolerances
| Obsolete |
| GB/T 908-1987 | English | 199 |
Add to Cart
|
2 days
|
Forged round and square steels dimension, shape, weight and tolerance
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 908-2019
GB/T 908-2019: Forged bars for dimensions, shape, weight and tolerances---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT908-2019
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.140.60
H 44
Replacing GB/T 908-2008
Forged bars for dimensions, shape, weight and
tolerances
Issued on. JUNE 04, 2019
Implemented on. MAY 01, 2020
Issued by. State Administration for Market Regulation;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword... 3
1 Scope... 5
2 Classification... 5
3 Section shape... 5
4 Section size, weight and allowable deviation... 6
Annex A (normative) Size and theoretical weight of forged bars... 13
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces GB/T 908-2008 “Forged Bars - Dimensions, Shape,
Weight and Tolerances”. Compared with GB/T 908-2008, main changes are as
follows.
- maximum nominal diameter of round steel was increased from 400mm to
1000mm; maximum nominal side length of square steel was increased
from 400mm to 1000mm; correspondingly added stipulations on allowable
size deviation (see Table 1 of this Edition, Table 1 of Edition 2008);
- maximum nominal thickness of flat steel was increased from 160mm to
800mm; maximum nominal width was increased from 300mm to 1500mm;
correspondingly added stipulations on allowable size deviation (see Table
2 of this Edition, Table 2 of Edition 2008);
- added stipulations on size, shape and allowable deviation of polished round
steel (see Table 1 of this Edition);
- added stipulations on size, shape and allowable deviation of machined steel
bar (see Table 3 of this Edition);
- tightened stipulations on curvature of steel bar (see 4.4 of this Edition, 2.5
of Edition 2008);
- added requirements for steel bar delivery with both ends sawing and
stipulations on cutting slope (see Table 6 of this Edition);
- deleted marking examples (see Clause 4 of Edition 2008).
This Standard was proposed by China Iron and Steel Association.
This Standard shall be under the jurisdiction of National Technical Committee
on Steels of Standardization Administration of China (SAC/TC 183).
The drafting organizations of this Standard. Northeast Special Steel Group
Fushun Special Steel Co., Ltd., Xiwang Special Steel Company Limited,
Metallurgical Industry Information Standards Institute.
Main drafters of this Standard. Gu Qiang, Yu Zongyang, Wang Yujie, Zhang
Qingsheng, Chen Qingxin, Liu Baoshi, Li Wenshuang.
Versions of standard substituted by this Standard are.
- GB/T 908-1972, GB/T 908-1987, GB/T 908-2008;
- GB/T 16761-1997.
Forged bars for dimensions, shape, weight and
tolerances
1 Scope
This Standard specifies section shape, section size, weight and allowable
deviation, length and allowable deviation, shape of forged bars (round steel,
square steel, flat steel).
This Standard is applicable to forged round steel of which diameter is
40mm~1000mm, forged square steel of which side length is 40mm~1000mm
and flat steel of which thickness is 20mm~800mm, width is 40mm~1500mm.
2 Classification
Forged bars, according to surface state of delivery, are classified into following
three categories.
3 Section shape
3.1 Section shapes of forged round steel and flat steel are shown as Figure 1.
4 Section size, weight and allowable deviation
4.1 Size and weight
4.1.1 Sizes and theoretical weights of forged round steel, square steel shall
comply with provisions of Table A.1 in Annex A.
4.1.3 Theoretical weights of forged bars that exceed nominal size range
specified in Table A.1, Table A.2 are determined by supplier and purchaser via
negotiation.
4.2 Allowable size deviation
4.2.1 Hot-forged bars
4.2.1.1 Sizes and allowable deviations of hot-forged wound steel and flat steel
shall comply with Table 1.Allowable size deviation groups shall be indicated in
corresponding product standards or order contracts. If not specified, perform
according to allowable deviation of Group 2.
4.2.1.4 Agreed by supplier and purchaser and indicated in contract, hot-forged
bars of medium size unlisted in Table 1 and Table 2 or hot-forged bars of
maximum nominal size exceeding Table 1 and Table 2 can be also supplied.
4.2.2 Polished bars
4.2.2.1 Size and allowable deviation of polished round steel of which nominal
diameter is 40mm~200mm shall comply with Table 1.Size and allowable
deviation of polished round steel of which nominal diameter is greater than
200mm~600mm shall comply with Table 3.Allowable size deviation groups
shall be indicated in corresponding product standards or order contracts. If not
specified, perform according to allowable deviation of Group 2.
4.2.3 Machined bars
Size and allowable deviation of machined bars shall comply with Table 4.
4.3 Length and allowable deviation
4.3.1 Generally, delivery length for forged bars shall not be less than 1500mm.
4.3.2 Short-foot forged bars of which length is not less than 1000mm are
allowed to deliver. But their weights must not exceed 10% of total weight of this
batch of delivery.
4.3.3 When delivered according to definite length, double length, its allowable
length deviation is mm.
4.4 Shape
4.4.1 Hot-forged bars
4.4.1.1 Hot-forged round steel
4.4.1.3 Hot-forged flat steel
4.4.1.3.1 Plane curvature of hot-forged flat steel per meter shall not exceed
4mm. Total plane curvature shall not exceed 0.4% of total length.
4.4.1.3.2 Side curvature (sickle bend) per meter of hot-forged flat steel shall not
exceed 4mm. Total side curvature (sickle bend) shall not exceed 0.4% of total
length.
4.4.2 Polished bars
4.4.2.1 Curvature of polished round steel per meter shall not exceed 4mm. Total
curvature shall not exceed 0.4% of total length.
4.4.2.2 Diameter difference of polished round steel at one same section shall
not exceed 0.7 times nominal diameter tolerance.
4.4.3 Machined bars
4.4.3.1 Curvature of round steel and square steel per meter shall not exceed
2.5mm. Total curvature shall not exceed 0.25% of total length.
4.4.3.2 Plane curvature and side curvature (sickle bend) of flat steel shall not
exceed 2.5mm per meter. Total curvature shall not exceed 0.25% of total length.
4.4.4 Cutting slope of end face
4.4.4.1 Both end faces of forged bars shall be delivered in sawing.
4.4.4.2 Cutting slope of end face of forged bars shall comply with Table 5.
Annex A
(normative)
Size and theoretical weight of forged bars
A.1 See Table A.1 for sizes and theoretical weights of round steel, square steel
of which nominal diameter or side length is 40mm~400mm.
A.2 See Table A.2 for size and theoretical weight of flat steel of which nominal
thickness is 20mm~160mm, nominal width is 40mm~300mm.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 908-2019 be delivered?Answer: The full copy PDF of English version of GB/T 908-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 908-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 908-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 908-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 908-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 908-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 908-2019?A step-by-step guide to download PDF of GB/T 908-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 908-2019".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|