Powered by Google www.ChineseStandard.net Database: 189760 (20 Apr 2024)

GB/T 798-2021 (GBT798-2021)

GB/T 798-2021_English: PDF (GBT 798-2021, GBT798-2021)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 798-2021English125 Add to Cart 0--9 seconds. Auto-delivery Eye bolts Valid GB/T 798-2021

Standard ID GB/T 798-2021 (GB/T798-2021)
Description (Translated English) Eye bolts
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J13
Classification of International Standard 21.060.10
Word Count Estimation 9,984
Date of Issue 2021-12-31
Date of Implementation 2022-07-01
Older Standard (superseded by this standard) GB/T 798-1988
Drafting Organization Ningbo Jiulong Fastener Manufacturing Co., Ltd., China Machinery Productivity Promotion Center, Zhejiang Greeway Machinery Co., Ltd., Zhejiang Huifeng Auto Parts Co., Ltd., Wenling Screw Steel Machinery Co., Ltd., Dingxi High Strength Fastener Co., Ltd.
Administrative Organization National Fastener Standardization Technical Committee (SAC/TC 85)
Regulation (derived from) National Standard Announcement No. 17 of 2021
Proposing organization China Machinery Industry Federation
Issuing agency(ies) State Administration for Market Regulation, National Standardization Administration

Standards related to: GB/T 798-2021

GB/T 798-2021
ICS 21.060.10
CCS J 13
Replacing GB/T 798-1988
Eye Bolts
Issued by. State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword... 3 
1 Scope... 5 
2 Normative References... 5 
3 Terms and Definitions... 6 
4 Types and Dimensions... 6 
5 Direction and Position Tolerance... 9 
6 Technical Conditions and References... 10 
7 Designation... 11 
Bibliography... 12 
This document was drafted in accordance with the rules in GB/T 1.1-2020 Directives for
Standardization - Part 1.Rules for the Structure and Drafting of Standardizing Documents.
This document serves as a replacement of GB/T 798-1988 Eye Bolts. In comparison with GB/T
798-1988, apart from structural adjustments and editorial modifications, the main technical
changes are as follows.
a) “NOTE. the variety of commodity fasteners shall be preferred” is deleted (see Chapter
1 of Version 1988);
b) The specification range and Grade-C product dimensions are modified; Grade-A and
Grade-B products are added (see Chapter 1 and Chapter 4; Chapter 1 and Chapter 3
of Version 1988);
c) The quoted standards on bolts are unified as GB/T 193, GB/T 9145 and GB/T 9146
(see Table 3; Table 2 of Version 1988);
d) The requirements for perpendicularity tolerance and symmetry tolerance are added
(see Chapter 5);
e) It is added that the universal technical conditions shall comply with GB/T 16983 (see
Table 3);
f) It is added that the technical requirements for the surface treatment of hot-dip
galvanized layer shall comply with GB/T 5267.3 (see Table 3);
g) It is added that the surface defects shall comply with GB/T 5779.1 (see Table 3).
Please be noted that certain content of this document may involve patents. The institution
issuing this document does not undertake the responsibility of identifying these patents.
This document was proposed by China Machinery Industry Federation.
This document shall be under the jurisdiction of National Technical Committee 85 on Fasteners
of Standardization Administration of China (SAC/TC 85).
The drafting organizations of this document. Ningbo Jiulong Fastener Manufacturing Co., Ltd.;
China Productivity Center for Machinery; Zhejiang Greeway Machinery Co., Ltd.; Zhejiang
Huifeng Autoparts Co., Ltd.; Wenling Luogang Machinery Co., Ltd.; Dingxi High Strength
Fastener Co., Ltd.
This document shall be interpreted by National Technical Committee on Fasteners of
Standardization Administration of China.
The issuing of the previous versions.
Eye Bolts
1 Scope
This document specifies the types, dimensions, technical conditions and designation of eye
This document is applicable to eye bolts with the thread specification of M5 ~ M39 and the
product grade of Grade-A, Grade-B and Grade-C.
2 Normative References
The contents of the following documents constitute indispensable clauses of this document
through the normative references in this text. In terms of references with a specified date, only
versions with a specified date are applicable to this document. In terms of references without a
specified date, the latest version (including all the modifications) is applicable to this document.
GB/T 3 Run-outs, Undercuts and Chamfers for General Purpose Metric Screw Threads
GB/T 90.1 Fasteners - Acceptance Inspection
GB/T 90.2 Fasteners - Marking and Packaging
GB/T 193 General Purpose Metric Screw Threads - General Plan
GB/T 1237 Designation System for Fasteners
GB/T 1800.1 Geometrical Product Specifications (GPS) - ISO Code System for Tolerances on
Linear Sizes - Part 1.Basis of Tolerances, Deviations and Fits
GB/T 3098.1 Mechanical Properties of Fasteners - Bolts, Screws and Studs
GB/T 3098.6 Mechanical Properties of Fasteners - Stainless Steel Bolts, Screws and Studs
GB/T 3103.1 Tolerances for Fasteners - Bolts, Screws, Studs and Nuts
GB/T 5267.1 Fasteners - Electroplated Coatings
GB/T 5267.2 Fasteners - Non-electrolytically Applied Zinc Flake Coatings
GB/T 5267.3 Fasteners - Hot Dip Galvanized Coatings
GB/T 5276 Fasteners - Bolts, Screws, Studs and Nuts - Symbols and Descriptions of
GB/T 5779.1 Fasteners - Surface Discontinuities - Bolts, Screws and Studs for General
GB/T 9145 General Purpose Metric Screw Threads - Limits of Sizes for the Screw Threads of
Medium Quality and Preferable Plan
GB/T 9146 General Purpose Metric Screw Threads - Limits of Sizes for the Screw Threads of
Coarse Quality and Preferable Plan
GB/T 12362 Steel Die Forgings - Tolerance and Machining Allowance
GB/T 16938 Fasteners - General Requirements for Bolts, Screws, Studs and Nuts
3 Terms and Definitions
This document does not have terms or definitions that need to be defined.
4 Types and Dimensions
The types and dimensions of the bolts are shown in Figure 1, Table 1 and Table 2.
The symbols and descriptions of dimensions shall comply with GB/T 5276.