GB/T 4663-2017 (GB/T4663-2017, GBT 4663-2017, GBT4663-2017)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 4663-2017 | English | 105 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Rolling bearings -- Cylindrical thrust roller bearings -- Boundary dimensions
| Valid |
GB/T 4663-2017
|
Standards related to: GB/T 4663-2017
| Standard ID | GB/T 4663-2017 (GB/T4663-2017) | | Description (Translated English) | Rolling bearings -- Cylindrical thrust roller bearings -- Boundary dimensions | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J11 | | Classification of International Standard | 21.100.20 | | Word Count Estimation | 9,938 | | Date of Issue | 2017-05-12 | | Date of Implementation | 2017-12-01 | | Older Standard (superseded by this standard) | GB/T 4663-1994 | | Quoted Standard | GBIT 272; GB/T 274; GB/T 6930 | | Drafting Organization | Luoyang LYC Bearing Co., Ltd. | | Administrative Organization | National Standard Committee on Rolling Bearing Technical Committee (SAT/TC 98) | | Proposing organization | China Machinery Industry Federation | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, China National Standardization Administration Committee | | Summary | This standard specifies the dimensions of one-way and two-way thrust cylindrical roller bearings. This standard is applicable to the design and selection of unidirectional and bidirectional thrust cylindrical roller bearings. | GB/T 4663-2017
GB
NATIONAL STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 21.100.20
J 11
Replacing GB/T 4663-1994
Rolling bearings - Cylindrical thrust roller bearings -
Boundary dimensions
滚动轴承 推力圆柱滚子轴承 外形尺寸
ISSUED ON. MAY 12, 2017
IMPLEMENTED ON. DECEMBER 1, 2017
Issued by. General Administration of Quality Supervision, Inspection
and Quarantine;
Standardization Administration Committee.
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 4
4 Symbols... 4
5 Code ... 5
6 Mark ... 5
7 Boundary dimensions ... 5
Foreword
This Standard was drafted in accordance with the rules given in GB/T
1.1-2009.
This Standard replaces GB/T 4663-1994 Rolling bearings - Cylindrical thrust
roller bearings - Boundary dimensions. Compared with GB/T 4663-1994, in
addition to the editorial modifications, the main technical changes are as
follows.
- added “Terms and definitions” and “Codes” (see Clause 3, Clause 5 of
this Edition);
- added models and dimensions for 11 series of bearings of some
one-way cylindrical thrust roller bearings (see Table 1 of this Edition,
Table 1 of Edition 1994);
- added the structural type and boundary dimensions of two-way
cylindrical thrust roller bearings (see Table 2, Table 3 of this Edition);
- deleted “old and new bearing code contrast” (see Annex A of Edition
1994).
This Standard was proposed by China Machinery Industry Federation.
This Standard shall be under the jurisdiction of National Technical Committee
on Rolling Bearings of Standardization Administration of China (SAC/TC 98).
The drafting organization of this Standard. Luoyang LYC Bearing Co., Ltd.
Main drafters of this Standard. Pang Bitao, Xie Xinghui, Wang Jincheng, Xu
Lingling, Hu Min.
Versions of standard substituted by this Standard are.
- GB/T 4663-1984, GB/T 4663-1994.
Rolling bearings - Cylindrical thrust roller bearings -
Boundary dimensions
1 Scope
This Standard specifies the boundary dimensions of one-way and two-way
cylindrical thrust roller bearings.
This Standard is applicable to the design and selection of one-way and
two-way cylindrical thrust roller bearings.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including
any amendments) applies.
GB/T 272, Rolling bearing - Identification code
GB/T 274, Rolling bearings - Chamfer dimension - Maximum values
GB/T 6930, Rolling bearings - Vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions defined in GB/T
6930 apply.
4 Symbols
The following symbols apply to this document.
Unless otherwise stated, the symbols shown in Figures 1 and 2 and the
values shown in Tables 1 to 3 indicate nominal dimensions.
D. seat outer diameter
D1. seat inner diameter
D1smin. the smallest single seat diameter
d. inner diameter of one-way bearing shaft
d1. outer diameter of one-way bearing shaft
d1smax. maximum single shaft outer diameter
d2. inner diameter of medium ring of two-way bearing
d3. outer diameter of medium ring of two-way bearing
r. chamfer size of shaft (one-way bearing) and seat ring back
rsmin. smallest single chamfer size of shaft (one-way bearing) and seat ring
back
r1. chamfer size of medium ring end face
r1smin. smallest single chamfer size of medium ring end face
T. one-way bearing height
T1. two-way bearing height
5 Code
The codes provided in GB/T 272 apply to this document.
6 Mark
Marking example. roller bearing 81100 GB/T 4663-2017
7 Boundary dimensions
7.1 The boundary dimensions of one-way cylindrical thrust roller bearings
are in accordance with Table 1 and Table 2.
...
|