Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 169760 (Feb 20, 2021)
HOME   Quotation   Tax   Examples Standard-List   Contact-Us   View-Cart

GB/T 4661-2015

Chinese Standard: 'GB/T 4661-2015'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusRelated Standard
GB/T 4661-2015English90 Add to Cart 0--10 minutes. Auto immediate delivery. Rolling bearings -- Cylindrical rollers Valid GB/T 4661-2015
GB/T 4661-2015Chinese20 Add to Cart <=1-day [PDF from Chinese Authority, or Standard Committee, or Publishing House]

  In 0~10 minutes time, full copy of this English-PDF will be auto-immediately delivered to your email. See samples for translation quality.  

Standard ID GB/T 4661-2015 (GB/T4661-2015)
Description (Translated English) Rolling bearings. Cylindrical rollers
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J11
Classification of International Standard 21.100.20
Word Count Estimation 16,149
Date of Issue 2015-12-31
Date of Implementation 2016-07-01
Older Standard (superseded by this standard) GB/T 4661-2002
Quoted Standard GB/T 4199-2003; GB/T 6930-2002; GB/T 7235; GB/T 7811; GB/T 8597; GB/T 18254; GB/T 18579; GB/T 24608; GB/T 24632.1; JB/T 1255; JB/T 6641; JB/T 7051; JB/T 7361
Drafting Organization Luoyang Bearing Research Institute Co., Ltd; Suzhou Bearing Factory Co., Ltd; Changzhou Koyo Bearing Co., Ltd; Star of Jiangsu General Ball Co., Ltd.; Shandong Camry Bearing Co., Ltd.
Administrative Organization Rolling the National Standardization Technical Committee (SAC/TC 98)
Regulation (derived from) State Standard Announcement 2015 No.43
Proposing organization China Machinery Industry Federation
Issuing agency(ies) Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China
Summary This standard specifies the size, technical requirements, inspection and measurement methods, inspection rules, marking, packaging and storage of finished steel cylindrical roller for rolling drawing. This standard applies to rolling bearings with supporting and commercial use of steel cylindrical roller (hereinafter referred to as roller).

GB/T 4661-2015
ICS 21.100.20
J 11
Replacing GB/T 4661-2002
Rolling Bearings – Cylindrical Rollers
滚动轴承 圆柱滚子
Issued by. General Administration of Quality Supervision, Inspection and
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Terms and Definitions ... 5
4 Symbols ... 8
5 Dimensions ... 9
6 Technical Requirements ... 12
7 Inspection and Measurement Methods ... 14
8 Inspection Rules ... 15
9 Marks ... 15
10 Package and Storage ... 16
Appendix A (Informative) Roller Diameter Gauge and Classification Rules ... 17
Appendix B (Informative) Roller Length Gauge and Classification Rules ... 19
Appendix C (Informative) Evaluation Method on Deviation from Circular
Form of Roller Outside Diameter Surface ... 20
This Standard was drafted as per the rules specified in GB/T 1.1-2009.
This Standard replaced GB/T 4661-2002 Rolling Bearings – Cylindrical Rollers;
Compared with GB/T 4661-2002, this Standard has the major technical changes as
--- Added and modified part of terms and definitions (see Chapter 3 of this Edition;
Chapter 2 of 2002 Edition);
--- Took “symbol” as an independent chapter, and added relevant symbols (see
Chapter 4 of this Edition; Chapter 3 of 2002 Edition);
--- Increased and modified the dimension specifications of rollers (see Chapter 5 of
this Edition; Chapter 4 of 2002 Edition);
--- Modified the roller grade and diameter tolerance (see Chapter 6 of this Edition;
Chapter 5 of 2002 Edition);
--- Modified the roller technical requirements (see Chapter 6 and 7 of this Edition;
Chapter 5 of 2002 Edition);
--- Modified roller marks etc. (See Chapter 8 of this Edition; Chapter 9 of 2002
--- Added roller diameter gauge value and classification rules (see Appendix A);
--- Added roller length gauge value and classification rules (see Appendix B).
This Standard was proposed by China Machinery Industry Federation.
This Standard shall be under the jurisdiction of National Technical Committee for
Standardization of Rolling Bearings (SAC/TC 98).
Drafting organizations of this Standard. Luoyang Bearing Research Institute Co., Ltd.,
Suzhou Bearing Factory Co., Ltd., Changzhou Guangyang Bearing Co., Ltd., Jiangsu
Lixing General Steel Ball Co., Ltd., and Shandong KMR Science & Technology Co.,
Chief drafting staffs of this Standard. Guo Baoxia, Zhang Xiaoling, Lian Weifeng, Sha
Xiaojian, Yan Jingxiang, Sun Dianxun, and Feng Bing.
The historical editions replaced by this Standard are as follows.
--- GB 4661-1984, GB/T 4661-1989, GB/T 4661-2002.
Rolling Bearings – Cylindrical Rollers
1 Scope
This Standard specifies the dimensions, technical requirements, inspection and
measurement methods, inspection rules, marks, package and storage for finished
product of steel cylindrical rollers used by rolling bearings.
This Standard is applicable to the steel cylindrical rollers (hereinafter referred to as
roller) for the supporting and commercializing usage of the rolling bearings.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB/T 4199-2003 Rolling Bearings - Tolerances - Definitions
GB/T 6930-2002 Rolling Bearings - Vocabulary
GB/T 7235 Geometrical Product Specifications(GPS) - Methods for the
Assessment of Departure from Roundness - Measurement of Variations in Radius
GB/T 7811 Rolling Bearings – Symbols for Quantities
GB/T 8597 Rolling Bearings – Rust Roof Packaging
GB/T 18254 High-Carbon Chromium Bearing Steel
GB/T 18579 High-Carbon Chromium Bearing Steel Wires
GB/T 24608 Inspection Rules for Rolling Bearings and Commercial Parts
GB/T 24632.1 Geometrical Product Specifications (GPS) – Roundness - Part 1.
Vocabulary and Parameters
JB/T 1255 Rolling Bearings - Parts Made from High-Carbon Chromium Bearing
Steels - Specifications for Heat Treatment
JB/T 6641 Rolling Bearings – Residual Magnetism and its Assessment Method
JB/T 7051 Rolling Bearing Parts – Methods for the Measurement and Assessment
3.7 Chamfer dimension (r)
The chamfer dimension value as the benchmark.
3.8 Single chamfer dimension (rs)
In the single radial plane, the distance between imaginary sharp corner of the
roller and the intersecting point of chamfer surface and roller end face.
In the single radial plane, the distance between imaginary sharp corner of the
roller and the intersecting point of chamfer surface and roller outer surface.
NOTE. according to GB/T 4199-2003, define 5.4.2, and modify.
3.9 Smallest single chamfer dimension (rs min)
The allowable smallest radial and axial single chamfer dimension of roller.
NOTE. according to GB/T 4199-2003, define 5.4.3, and modify.
3.10 Largest single chamfer dimension (rs max)
The allowable largest radial and axial largest chamfer dimension of roller.
NOTE. according to GB/T 4199-2003, define 5.4.4, and modify.
3.11 Axial runout of roller end face with respect to the roller axis (SDw)
In certain radial distance away from the roller axis, the difference between the
maximum and minimum axial distance of the roller end face.
3.12 Deviation from circular form of roller outside diameter surface (ΔRw)
The radial distance between the minimum circumscribed circle and maximum inscribed
circle, generally, the center of the circle is one of least square circle.
3.13 Surface roughness
The surface roughness with relatively smaller interval, which generally includes the
roughness influencing by the applied processing method and (or) other factors.
NOTE. these roughness is generally considered within the scope of the conventional definition,
such as the sampling length range.
3.14 Roller diameter gauge
the dispersion between the average diameter of roller diameter gauge lot and nominal
diameter of roller; such dispersion is a quantity within a set of series.
In the same roller length gauge lot, the difference between the maximum and minimum
average length of rollers.
3.24 Roller grade (G)
Roller groups divided by size, shape, surface roughness and classification tolerance.
[GB/T 6930-2002, define 05.05.10]
3.25 Hardness
The specific test method is used to determine the magnanimity to resist the pressure,
such as Rockwell Hardness Method.
3.26 Roller outside diameter surface
When rotating around the roller axis, the surface formed by the effective roller length.
NOTE. effective roller length La=Lw-2r.
4 Symbols
The following symbols and the ones stipulated in GB/T 7811 are applicable to this
Unless otherwise is specified, the symbols shown in Figure 1 (except for the tolerance
symbol) and the values shown in Table 1 are the nominal dimensions.
Dw. roller diameter;
DwmL. mean diameter of roller diameter gauge lot;
G. roller grade;
IGDw. interval of roller diameter gauge;
IGLw. interval of roller length gauge;
La. roller effective length, La=Lw-2r;
Lw. roller length;
LwmL. mean length of roller length gauge lot;
r. chamfer dimension;
rs. single chamfer dimension;
The plain lines on the roller surface shall conduct crown modification; its convexity and
crown values shall be determined by the product drawing.
6.5 Residual magnetism
The residual magnetism limit of roller shall conform to the provisions of JB/T 6641.
6.6 Appearance quality
The roller surface shall be free from cracks and rust. The working surface shall be free
from the following visible defects, such as casting skin, pocking mark, scratches etc.;
after acid cleaning, there shall be no burns or soft spots.
Related standard: GB/T 4663-2017    GB/T 4662-2012
Related PDF sample: GB/T 4663-2017    GB/T 308.1-2013