GB/T 40521.1-2021 PDF English
US$170.00 · In stock · Download in 9 secondsGB/T 40521.1-2021: Passenger cars test track for a severe lane-change manoeuvre - Part 1: Double lane-change Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 40521.1-2021 | English | 170 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Passenger cars test track for a severe lane-change manoeuvre - Part 1: Double lane-change
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 40521.1-2021
GB/T 40521.1-2021: Passenger cars test track for a severe lane-change manoeuvre - Part 1: Double lane-change
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT40521.1-2021
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.020
CCS T 41
Passenger cars test track for a severe lane-change
manoeuvre - Part 1: Double lane-change
(ISO 3888-1:2018, Passenger cars - Test track for a severe lane-change
manoeuvre - Part 1: Double lane-change, MOD)
ISSUED ON: AUGUST 20, 2021
IMPLEMENTED ON: MARCH 01, 2022
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
Introduction ... 5
1 Scope ... 6
2 Normative references ... 6
3 Terms and definitions ... 6
4 Specification details ... 6
Appendix A (Informative) Test method ... 10
References ... 13
Passenger cars test track for a severe lane-change
manoeuvre - Part 1: Double lane-change
1 Scope
This document specifies the size of the test track for the severe lane-change
manoeuvre closed-loop test of the passenger cars double lane-change capacity
subjective assessment.
This document applies to passenger cars that are defined in GB/T 3730.1; it
can be implemented by reference for other types of vehicles whose total mass
is no more than 3.5 t.
2 Normative references
The contents of the following documents constitute the indispensable clauses
of this document through normative references in the text. For dated references,
only the version corresponding to that date is applicable to this document; for
undated references, the latest version (including all amendments) is applicable
to this document.
GB/T 3730.3, Motor vehicles and towed vehicles - Dimensions of vehicles -
Terms and definitions
3 Terms and definitions
Terms and definitions determined by GB/T 3730.3 and the following ones are
applicable to this document.
3.1
Vehicle width
Vehicle width, excluding the rearview mirror.
4 Specification details
4.1 Double lane-change test track size
Appendix A
(Informative)
Test method
A.1 Severe lane-change manoeuvre of double lane-change
A.1.1 Principle
The severe lane-change manoeuvre of double lane-change is a dynamic
evaluation method. The process is to drive the vehicle from the initial lane to
the adjacent parallel lane quickly, and then back to the original lane, during
which the vehicle shall not exceed the lane boundary.
A.1.2 Some characteristics for evaluating lane-keeping ability
The severe lane-change manoeuvre of double lane-change is used to
reproduce the transient lane-keeping ability during emergency closed-loop
control in actual driving. The driver can select the vehicle driving path in the set
test track.
For the performance of the "person-vehicle-road" system in actual driving, this
kind of preview control is a very important evaluation method. After selecting a
suitable driving path, the driver can repeat driving on this path at a certain
degree of accuracy.
A.1.3 Limitations
This test is a closed-loop test. The driver's control strategy will have a significant
impact on the test results. Objective measurement of vehicle dynamics-related
performance should not be performed; only subjective evaluation is
recommended.
Due to the difference in the driving path of the vehicle during each measurement,
the vehicle speed obtained from multiple tests will appear obvious dispersion.
Even if the longitudinal control process of the vehicle is strictly limited, more
consistent vehicle speed data cannot be obtained. Therefore, classification
shall not be based on vehicle speed, and the minimum vehicle speed for testing
shall not be specified.
A.1.4 Conclusion
This document only defines the geometric dimensions of the test track for
subjective evaluation of vehicle dynamics.
A.2 Examples of the test method
A.2.1 Summary
This test is often used for subjective evaluation of vehicles. Only drivers with
corresponding skills are allowed to carry out this test. If any traffic cone placed
according to 4.2 is not touched during the test, it is regarded as passed
smoothly.
The measuring distance (take the estimated average vehicle speed as an
example) is from the start of the first section of the lane to the end of the fifth
section.
The gear, braking energy recovery mode, working status of ESP and other
information used in the test shall be recorded in the test report.
A.2.2 Test method 1
The recommended vehicle speed when entering section 1 is (80±3) km/h, or
higher or lower, which shall be recorded in the test report.
Throughout the test, the vehicle speed shall be kept as stable as possible.
Other control methods (such as specific steering control) can also be used.
The vehicle speed when driving out of section 5 shall be recorded in the test
report.
Some typical uses of this test are as follows:
-- Analyze time-domain signals of steering input or body motion parameters;
-- Evaluate driving control strategies;
-- Subjective evaluation of vehicles.
A.2.3 Test method 2
The speed of the vehicle entering section 1 shall be the maximum speed that
can pass this test procedure smoothly.
One of the following two accelerator positions can be selected:
-- Keep the accelerator position as stable as possible throughout the test. If
necessary, a trail test can be performed to determine the accelerator
position.
-- Any accelerator position can also be used in the test.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 40521.1-2021 be delivered?Answer: The full copy PDF of English version of GB/T 40521.1-2021 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 40521.1-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 40521.1-2021_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 40521.1-2021 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 40521.1-2021?A step-by-step guide to download PDF of GB/T 40521.1-2021_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 40521.1-2021".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |