HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189759 (9 Feb 2025)

GB/T 3903.12-2021 English PDF (GB/T 3903.12-2005)

GB/T 3903.12-2021_English: PDF (GB/T3903.12-2021)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 3903.12-2021English185 Add to Cart 0--9 seconds. Auto-delivery Footwear -- Test methods for outsoles -- Tear strength Valid GB/T 3903.12-2021
GB/T 3903.12-2005English319 Add to Cart 3 days [Need to translate] Footwear -- Test methods for outsoles -- Tear strength Obsolete GB/T 3903.12-2005


BASIC DATA
Standard ID GB/T 3903.12-2021 (GB/T3903.12-2021)
Description (Translated English) Footwear -- Test methods for outsoles -- Tear strength
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard Y78
Classification of International Standard 61.060
Word Count Estimation 8,865
Date of Issue 2021-10-11
Date of Implementation 2022-05-01
Older Standard (superseded by this standard) GB/T 3903.12-2005
Drafting Organization Anta (China) Co., Ltd., Chengdu Product Quality Inspection and Research Institute Co., Ltd., Dezhou Xinhuarun Technology Co., Ltd., China Leather and Footwear Research Institute Co., Ltd., China Light Inspection and Certification (Wenling) Co., Ltd.
Administrative Organization National Shoemaking Standardization Technical Committee (SAC/TC 305)
Proposing organization China National Light Industry Council
Issuing agency(ies) State Administration for Market Regulation, National Standardization Administration

BASIC DATA
Standard ID GB/T 3903.12-2005 (GB/T3903.12-2005)
Description (Translated English) Footwear. Test methods for outsoles. Tear strength
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard Y78
Classification of International Standard 61.060
Word Count Estimation 7,749
Date of Issue 2005-09-15
Date of Implementation 2006-09-01
Quoted Standard ISO 4648; EN 10002-2; EN 12222; PREN 13400-1998
Adopted Standard ISO 20872-2001; IDT
Drafting Organization China Leather and Footwear Industry Research Institute
Administrative Organization National shoe Standardization Center
Regulation (derived from) Announcement of Newly Approved National Standards No. 12 of 2005 (total 86)
Proposing organization China Light Industry Federation
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China, China National Standardization Administration Committee
Summary This standard specifies: Shoes outsole material was measured using a pants-shaped specimens tear strength methods.


GB/T 3903.12-2021 NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 61.060 CCS Y 78 Replacing GB/T 3903.12-2005 Footwear - Test methods for outsoles - Tear strength (ISO 20872:2018, MOD) ISSUED ON: OCTOBER 11, 2021 IMPLEMENTED ON: MAY 01, 2022 Issued by: State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of Contents Foreword ... 3  1 Scope ... 5  2 Normative references ... 5  3 Terms and definitions... 5  4 Test equipment and materials ... 6  5 Sampling and conditioning ... 7  6 Test methods ... 8  7 Expression of test results ... 8  8 Test report ... 9  References ... 11  Footwear - Test methods for outsoles - Tear strength 1 Scope This document describes test methods for the determination of tear strength of footwear outsoles by using trousers-shaped samples. This document applies to footwear outsoles of all materials. 2 Normative references The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. For dated references, only the version corresponding to that date is applicable to this document; for undated references, the latest version (including all amendments) is applicable to this document GB/T 16825.1, Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force- measuring system (GB/T 16825.1-2008, ISO 7500-1:2004, IDT) GB/T 22049, Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear (GB/T 22049-2019, ISO 18454:2018, IDT) GB/T 22050, Footwear - Sampling location preparation and duration of conditioning of samples and test pieces (GB/T 22050-2008, ISO 17709:2004, IDT) 3 Terms and definitions The following terms and definitions are applicable to this document. 3.1 trouser tear strength Divide the median of the force required to tear the incision on the trousers-shaped sample by the thickness of the sample. 3.2 median The number in the middle of an ordered set of data. Indexing serial number description: a – cutting direction. Figure 2 – Leather outsole trousers-shaped sample 4.2 Cutting knife Razor blade or sharp knife, which is used for making incisions or cuts on the sample. Make incisions of 40 mm ± 5 mm on the sample in the directions that are shown in Figures 1 and 2; the last 1 mm (approximately) of the incision is done with a razor blade or a sharp knife. 4.3 Tensile testing machine 4.3.1 The tensile testing machine complies with the requirements of GB/T 16825.1; the accuracy is level 2; the moving speed of the clamps is 100 mm/min ± 10 mm/min. The tensile testing machine is equipped with a device, of low inertia, which can automatically record the force value. 4.3.2 The clamps of the tensile testing machine shall be able to clamp the sample when the tensile force increases, and to apply uniform pressure to the clamping end of the sample. The clamps shall be equipped with a positioning device, so that the sample can be clamped symmetrically and in the same direction as the pulling force. 4.4 Thickness gauge The thickness gauge shall have a firm base, and its presser foot shall have a constant weight load, which can be applied with a pressure of 10 kPa ± 3 kPa (see ISO 23529). The presser foot of the thickness gauge shall be a circular plane whose diameter is 10 mm ± 0.1 mm. The meter scale is 0.01 mm. 5 Sampling and conditioning Take at least 3 samples according to GB/T 22050. When the sample size does not meet the sampling requirements, both parties shall agree on whether to use the actual sample length for testing, and record the sample length in the report. Before testing, all samples shall be subjected to conditioning for at least 24 h according to GB/T 22049. Use the punching die (4.1) to cut out the sample. The sample thickness should preferably be: -- For polymeric and elastic solid core outsoles, the thickness should be 2.0 mm ± 0.2 mm; -- For semi-foamed and foamed outsoles, the thickness should be 4.0 mm ± 0.2 mm; -- For leather outsoles, the thickness should be the original outsoles thickness. Measure the thickness at 3 different points and take the average. Where: TS – trouser tear strength, in Newtons per millimeter (N/mm); F – median of the peak force, in Newtons (N). The median of the peak force on the curve (see 3.2) is determined by the following appropriate method. Note: When applying the method described in this document, the tensile force is a time- varying variable during the test. Method A (a curve with less than 5 peaks): All peaks are considered when determining the median. If there is only one peak, the peak is the median. Method B (a curve with 5 to 20 peaks): The peaks within the middle 80% of the complete curve are considered when determining the median. d – the average thickness of the sample, in millimeters (mm). The test result is the average of the test results of 3 samples. 8 Test report The test report shall include the following contents: a) Number of this document; b) Sample thickness; c) Detailed description of the sample, including style, article number, color and material, etc.; d) Test result, which is calculated according to Chapter 7; e) Test date; f) Any deviation from this test method; g) Standard environmental conditions during the test; GB/T 3903.12-2021 NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 61.060 CCS Y 78 Replacing GB/T 3903.12-2005 Footwear - Test methods for outsoles - Tear strength (ISO 20872.2018, MOD) ISSUED ON. OCTOBER 11, 2021 IMPLEMENTED ON. MAY 01, 2022 Issued by. State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of Contents Foreword... 3  1 Scope... 5  2 Normative references... 5  3 Terms and definitions... 5  4 Test equipment and materials... 6  5 Sampling and conditioning... 7  6 Test methods... 8  7 Expression of test results... 8  8 Test report... 9  References... 11  Footwear - Test methods for outsoles - Tear strength 1 Scope This document describes test methods for the determination of tear strength of footwear outsoles by using trousers-shaped samples. This document applies to footwear outsoles of all materials. 2 Normative references The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. For dated references, only the version corresponding to that date is applicable to this document; for undated references, the latest version (including all amendments) is applicable to this document GB/T 16825.1, Verification of static uniaxial testing machines - Part 1. Tension/compression testing machines - Verification and calibration of the force- measuring system (GB/T 16825.1-2008, ISO 7500-1.2004, IDT) GB/T 22049, Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear (GB/T 22049-2019, ISO 18454.2018, IDT) GB/T 22050, Footwear - Sampling location preparation and duration of conditioning of samples and test pieces (GB/T 22050-2008, ISO 17709.2004, IDT) 3 Terms and definitions The following terms and definitions are applicable to this document. 3.1 trouser tear strength Divide the median of the force required to tear the incision on the trousers-shaped sample by the thickness of the sample. 3.2 median The number in the middle of an ordered set of data. Indexing serial number description. a – cutting direction. Figure 2 – Leather outsole trousers-shaped sample 4.2 Cutting knife Razor blade or sharp knife, which is used for making incisions or cuts on the sample. Make incisions of 40 mm ± 5 mm on the sample in the directions that are shown in Figures 1 and 2; the last 1 mm (approximately) of the incision is done with a razor blade or a sharp knife. 4.3 Tensile testing machine 4.3.1 The tensile testing machine complies with the requirements of GB/T 16825.1; the accuracy is level 2; the moving speed of the clamps is 100 mm/min ± 10 mm/min. The tensile testing machine is equipped with a device, of low inertia, which can automatically record the force value. 4.3.2 The clamps of the tensile testing machine shall be able to clamp the sample when the tensile force increases, and to apply uniform pressure to the clamping end of the sample. The clamps shall be equipped with a positioning device, so that the sample can be clamped symmetrically and in the same direction as the pulling force. 4.4 Thickness gauge The thickness gauge shall have a firm base, and its presser foot shall have a constant weight load, which can be applied with a pressure of 10 kPa ± 3 kPa (see ISO 23529). The presser foot of the thickness gauge shall be a circular plane whose diameter is 10 mm ± 0.1 mm. The meter scale is 0.01 mm. 5 Sampling and conditioning Take at least 3 samples according to GB/T 22050.When the sample size does not meet the sampling requirements, both parties shall agree on whether to use the actual sample length for testing, and record the sample length in the report. Before testing, all samples shall be subjected to conditioning for at least 24 h according to GB/T 22049.Use the punching die (4.1) to cut out the sample. The sample thickness should preferably be. -- For polymeric and elastic solid core outsoles, the thickness should be 2.0 mm ± 0.2 mm; -- For semi-foamed and foamed outsoles, the thickness should be 4.0 mm ± 0.2 mm; -- For leather outsoles, the thickness should be the original outsoles thickness. Measure the thickness at 3 different points and take the average. Where. TS – trouser tear strength, in Newtons per millimeter (N/mm); F – median of the peak force, in Newtons (N). The median of the peak force on the curve (see 3.2) is determined by the following appropriate method. Note. When applying the method described in this document, the tensile force is a time- varying variable during the test. Method A (a curve with less than 5 peaks). All peaks are considered when determining the median. If there is only one peak, the peak is the median. Method B (a curve with 5 to 20 peaks). The peaks within the middle 80% of the complete curve are considered when determining the median. d – the average thickness of the sample, in millimeters (mm). The test result is the average of the test results of 3 samples. 8 Test report The test report shall include the following contents. a) Number of this document; b) Sample thickness; c) Detailed description of the sample, including style, article number, color and material, etc.; d) Test result, which is calculated according to Chapter 7; e) Test date; f) Any deviation from this test method; g) Standard environmental conditions during the test; ......


GB/T 3903.12-2005 Footwear.Test methods for outsoles.Tear strength ICS 61.060 Y78 National Standards of People's Republic of China GB/T 3903.12-2005/ISO 20872.2001 Footwear outsole test method tear strength (ISO 20872.2001, IDT) Released on September 15,.2005 2006-09-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Administration issued Foreword This part of GB/T 3903 is equivalent to the international standard ISO 20872.2001 "Shoes --- Outsole Test Method --- Tear Strength". This part was proposed by the China National Light Industry Council. This part is under the jurisdiction of the National Shoe Standardization Center. This section drafted by. China Leather and Footwear Industry Research Institute. The main drafters of this section. Yan Huaidao, Xiao Xiaoxia. GB/T 3903.12-2005/ISO 20872.2001 Footwear outsole test method tear strength 1 range This part of GB/T 3903 specifies the method for determining the tear strength of a footwear outsole using a pant sample. 2 Normative references The terms in the following documents become the provisions of this part by reference in this part of GB/T 3903. Quotations with dated , all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved under this section The parties to the agreement study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this section. ISO 4648 vulcanized or thermoplastic rubber---Test specimen size and method EN10002-2 Metallic materials -- tensile test -- Part 2. Verification and correction of force measuring systems EN12222 Footwear---Standard environment for the placement and inspection of footwear and footwear components prEN13400.1998 Footwear---Sampling and positioning of footwear components 3 Terms and definitions The following terms and definitions apply to this part of GB/T 3903. 3.1 The median required to tear the slit on the pant sample by the thickness of the sample is the tear strength of the pant sample. 3.2 If the values are arranged in the order of increasing their algebraic values, they are numbered 1 to. When the shape is odd, the median is the first Shape +1 ( ) 2 values. When the shape is even, the median is between the two values of the first ( ) and the second ( ) +1 values. Mean. 4 Test equipment and materials Apply the following equipment and materials. 4.1 punching mold The outer dimensions of the punching mold of the pants sample are shown in Figures 1 and 2. GB/T 3903.12-2005/ISO 20872.2001 ......

Similar standards: GB/T 3903.8-2022  GB/T 3903.29-2022  
Similar PDFs (Auto-delivered in 9 seconds): GB/T 3903.12-2021  GB/T 3903.13-2020  GB/T 3903.14-2021  GB/T 3903.1-2017