GB/T 38568-2020 PDF English
US$85.00 · In stock · Download in 9 secondsGB/T 38568-2020: Determination of growth phenotype for industrial microbial strain - Microdroplet turbidity Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 38568-2020 | English | 85 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Determination of growth phenotype for industrial microbial strain - Microdroplet turbidity
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 38568-2020
GB/T 38568-2020: Determination of growth phenotype for industrial microbial strain - Microdroplet turbidity
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT38568-2020
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 07.080
A 21
Determination of growth phenotype for
industrialmicrobial strain - Microdroplet turbidity
ISSUED ON: MARCH 31, 2020
IMPLEMENTED ON: MARCH 31, 2020
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 4
4 Principle ... 4
5 Reagents or materials ... 4
6 Instruments and apparatuses ... 5
7 Determination steps ... 6
8 Result analysis ... 7
Determination of growth phenotype for
industrialmicrobial strain - Microdroplet turbidity
1 Scope
This Standard specifies the method for the determination of growth phenotype
for industrialmicrobial strain by microdroplet turbidity.
This Standard applies to the determination of the growth phenotype of bacteria,
fungi and microalgae strains for industrial fermentation.
2 Normative references
The following documents are indispensable for the application of this document.
For dated references, only the dated version applies to this document. For
undated references, the latest edition (including all amendments) applies to this
document.
GB/T 6682, Water for analytical laboratory use - Specification and test
methods
GB/T 14926.43, Laboratory animal - Bacteriological monitoring - Staining,
media and reagents
3 Terms and definitions
The following terms and definitions are applicable to this document.
3.1 Reference strain
The identified stock strain, whose fermentation performance is clear, for
fermentation production.
4 Principle
Generate single-cell-encapsulated droplets by the micro-fluidic chip; culture it.
Calculate the growth rate according to the area of the bacteria in the droplets.
5 Reagents or materials
Unless otherwise specified, all the reagents are analytical reagents.
7 Determination steps
7.1 Strain activation
7.1.1 Prepare solid plates and liquid culture media corresponding to industrial
microorganisms according to the methods that are given in GB/T 14926.43. Use
a sterile inoculating loop to dip the reference strain and the strain preservation
bacteria solution of the to-be-evaluated strain respectively; draw a line on the
solid plate; select the corresponding temperature and other conditions to
perform cultivation according to the production process parameters, until a
single colony grows; respectively pick 3 reference strains and 3 single colonies
of to-be-evaluated strains; inoculate them into a test tube that contains 5 mL of
liquid medium; select the corresponding temperature and speed according to
the production process parameters; cultivate to the logarithmic phase.
7.1.2 Pick a monoclone of the microorganism strain from the activated plate
petri dish; place it in a container of 5 mL of liquid medium; select the
corresponding temperature and speed according to the production process
parameters; cultivate to the stable period. After removing the supernatant, add
the PBS solution and repeat the washing 3 times.
7.2 Selection of microbial liquid concentration
Use the basal medium to dilute to obtain a cell suspension concentration of
about 6 × 105 CFU/mL.
7.3 Preparation of agarose solution
Use the analytical balance to weigh 0.02 g of ultra-low melting point agarose;
place it in a sterile EP tube; add 1 mL of sterilized basal medium to it; heat to
dissolve; prepare it into a 2% (mass concentration) solution. Use a 0.22 μm
sterile filter to filter while it is hot; prepare it when necessary.
7.4 Single cell droplet generation
7.4.1 Respectively take 500 μL of the microbial liquid and the agarose solution
in equal volumes and mix them.
7.4.2 Take a chip; respectively add 200 μL of fluorocarbon oil to the oil phase
inlet of the chip and 100 μL of low melting point agarose to the water phase
inlet; connect the syringe to the chip outlet.
7.4.3 Place the chip on the hot plate (temperature stability of ±1°C, range at
30 °C ~ 37 °C); fix the plunger of the syringe at the 2 mL mark; let the liquid
enter the chip through the negative pressure in the syringe; start to generate
droplets. It takes about 2 minutes to generate droplets.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 38568-2020 be delivered?Answer: The full copy PDF of English version of GB/T 38568-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 38568-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 38568-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 38568-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 38568-2020?A step-by-step guide to download PDF of GB/T 38568-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 38568-2020".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|