Path: Home > GB/T > Page354 > GB/T 3766-2015 Home > Standard_List > GB/T > Page354 > GB/T 3766-2015 GB/T 3766-2015 PDF English
GB/T 3766: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 3766-2015 | English | 175 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Hydraulic fluid power -- General rules and safety requirements for systems and their components
| Valid |
| GB/T 3766-2001 | English | RFQ |
ASK
|
6 days
|
Hydraulic fluid power -- General rules relating to systems
| Obsolete |
| GB/T 3766-1983 | English | 279 |
Add to Cart
|
3 days
|
Hydraulic fluid power--General rules for the application of equipment to transmission and control systems
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 3766-2015
GB/T 3766-2015: Hydraulic fluid power -- General rules and safety requirements for systems and their components
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT3766-2015
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 23.100.01
J 20
Replacing GB/T 3766-2001
Hydraulic fluid power - General rules and safety
requirements for systems and their components
(ISO 4413.2010, MOD)
Issued on. DECEMBER 31, 2015
Implemented on. JULY 1, 2016
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the PRC;
Standardization Administration of the PRC.
Table of Contents
Foreword... 3
Introduction... 7
1 Scope... 8
2 Normative references... 8
3 Terms and definitions... 10
4 List of significant hazards... 10
5 General rules and safety requirements... 11
5.1 General... 11
5.2 Basic requirements for the design and technical specification of hydraulic systems
... 11
5.3 Additional requirements... 13
5.4 Specific requirements for components and controls... 16
6 Verification of safety requirements and acceptance testing... 41
7 Information for use... 42
7.1 General requirements... 42
7.2 Final information for hydraulic systems on stationary industrial machinery... 42
7.3 Maintenance and operating data... 42
7.4 Marking and identification... 45
8 Identification statement... 47
Appendix A (Informative) List of significant hazards... 48
Appendix B (Informative) Form for collecting hydraulic system and component
data... 51
Bibliography... 60
Foreword
This Standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces GB/T 3766-2001 “Hydraulic Fluid Power - General
Rules Relating to Systems”. As compared with GB/T 3766-2001, the main
technical changes are as follows.
- ADD reference standards GB/T 2878.1, GB/T 2878.2, GB/T 14048.14,
GB/T 15706, GB 16754, GB/T 19671, GB/T 25133, ISO 1219-2, ISO 6149-
3, ISO 16874, ISO 17165-1 (SEE Clause 2);
- DELETE reference standards GB/T 2514, GB/T 2877, GB 4208, GB/T
5226.1, GB/T 8098, GB/T 8010, GB/T 8101, JB/T 5244, JB/T 5963, ISO
4400, ISO 6149-1, ISO 6952, ISO 7790, ISO 8434-1, ISO 8434-2, ISO
8434-3, ISO 8434-4, ISO/TR 11688-1, ISO 12151-1, ISO 12151-2, ISO
12151-3, ISO 12151-4, ISO 12151-5 (SEE Clause 2 of the 2001 version);
- ADD the content which shall be considered for valve selection and the
requirements for “isolation valve” (SEE 5.4.4.1);
- ADJUST some of the requirements for valve mounting (SEE 5.4.4.2);
- ADD requirements for identification of “manifold” (SEE 5.4.4.3.5);
- ADD the requirements for “level of contamination of hydraulic fluid” (SEE
5.4.5.1.3);
- ADD the requirement of providing a “pan” for reservoir design (SEE
5.4.5.2.1);
- ADD the requirement for the “structural integrity” of reservoirs (SEE
5.4.5.2.2.6);
- ADD the “corrosion protection” requirement for reservoirs (SEE 5.4.5.2.2.7);
- ADD “grounding” requirements for reservoirs (SEE 5.4.5.2.2.8);
- ADD the requirement of “electromagnetic interference protection” for
controls (SEE 5.4.7.6.1);
- ADD the “contamination control” requirement for “diagnostics and
monitoring” (SEE 5.4.8.5);
- ADD the connection identification requirement for conductors (SEE 7.4.3.2).
This Standard uses redraft law to modify and adopt ISO 4413.2010 “Hydraulic
fluid power - General rules and safety requirements for systems and their
components” (English version).
The technical differences between this Standard and ISO 4413.2010 and their
reasons are as follows.
- About normative references, this Standard has made adjustments with
technical differences, to adapt to the technical conditions of China. The
adjustments are reflected in Clause 2 “Normative references”, as follows.
REPLACE ISO 1219-1 with GB/T 786.1 identical to the international
standard (SEE 7.4.1.1);
REPLACE ISO 6149-1 with GB/T 2878.1 identical to the international
standard (SEE 5.3.2.5.2);
REPLACE ISO 6149-2 with GB/T 2878.2 which uses the international
standard by modification (SEE 5.3.2.5.2);
REPLACE ISO 4406 with GB/T 14039 which uses the international
standard by modification (SEE 5.4.5.1.3, 7.3.1.1);
REPLACE IEC 60947-5-5 with GB/T 14048.14 identical to the
international standard (SEE 5.4.7.7.2);
REPLACE ISO 12100 with GB/T 15706 identical to the international
standard (SEE Clause 1, Clause 3, 5.1.1, 7.1, Table A.1);
REPLACE ISO 13850 with GB/T 16754 identical to the international
standard (SEE 5.4.7.7.2);
REPLACE ISO 5598 with GB/T 17446 identical to the international
standard (SEE Clause 3);
REPLACE ISO 4021 with GB/T 17489 identical to the international
standard (SEE 5.4.8.3);
REPLACE ISO 13851 with GB/T 19671 which uses the international
standard by modification (SEE 5.4.7.3.6);
REPLACE ISO 23309 with GB/T 25133 identical to the international
standard (SEE 5.4.7.4.4);
- 5.4.1.7, ADD e), to cover more products for application;
- 5.4.2.1, DELETE ISO/TS 13725.This document has been abolished;
- b) of 5.4.5.1.2, CHANGE “fire-resistant hydraulic fluid” to “hydraulic fluid”;
- g) of 5.4.5.2.1, ADD a narrative, to make the requirements more
comprehensive;
- g) of 5.4.5.2.2.4, ADD a narrative, to reflect the actual application
requirements;
- O) of 7.3.1.1, ADD “SEE 5.4.3”.
This Standard also makes the following editorial changes.
- 5.2.7f), after “energy isolation”, ADD “(e.g., disconnection of power,
hydraulic sources)”, for easy understanding;
- REORGANIZE the sub-clauses of 5.3.2, to make them consistent with the
heading narrative order; SIMPLIFY the “Notes” of 5.3.2.3.2;
- MODIFY the “Notes” of 5.4.2.12;
- DELETE the statement “expressed in accordance with ISO 4406” in
5.4.5.3.1;
- ADD 5.4.6.5.3.3, to incorporate and supplement the same statements in
5.4.6.5.3.1 and 5.4.6.5.3.2;
- In Appendix B, some units are changed to the expression forms commonly
used in this profession.
This Standard was proposed by China Machinery Industry Federation.
This Standard shall be under the jurisdiction of National Technical Committee 3
on Hydropneumatic of Standardization Administration of China (SAC/TC 3).
Drafting organizations of this Standard. Beijing Research Institute of
Automation for Machinery Industry Co., Ltd., Haimen Youweili Hydraulic
Industry Co., Ltd., Hefei Changyuan Hydraulic Co., Ltd., Beijing Huade
Hydraulic Industrial Group Co., Ltd., Hydraulic Research Institute of Guangzhou
Mechanical Engineering Research Institute, AVIC Liyuan Hydraulic Co., Ltd.,
Ningbo Widesky SKS Hydraulic Co., Ltd., Yangzhou Jiangdu Yongjian Co., Ltd.,
Jiujiang Division of No.707 Research Institute of China Shipbuilding Industry
Corporation, Sichuan Changjiang Hydraulic Component Co., Ltd., Shenyang
Northeast Electric Power Control Co., Ltd., CCHC Hydraulics Co., Ltd.,
Taizhong Yuci Hydraulic System Branch, Bosch Rexroth (Changzhou) Co., Ltd..
Main drafters of this Standard. Liu Xinde, Lin Guang, Xu Qijun, Zhao Jingbo,
Lin Benhong, Zhang Chen, Liang Yong, Guo Lian, Zhu Aihua, Wang Dehua,
Zheng Xueming, Huan Qingxiang, Cui Yonghong, Zhou Weidong.
The previous versions of the standard replaced by this Standard were released
as follows.
- GB/T 3766-1983, GB/T 3766-2001.
1 Scope
This Standard specifies general rules and safety requirements for hydraulic
systems and their components used on machinery as defined by 3.1 in GB/T
15706-2012.This Standard deals with all significant hazards associated with
hydraulic systems and specifies the principles to avoid those hazards when the
systems are put to their intended use.
2 Normative references
The following documents are indispensable for the application of this document.
For the dated references, only the versions with the dates indicated are
applicable to this document. For the undated references, the latest version
(including all the amendments) are applicable to this document.
3 Terms and definitions
The terms and definitions given in GB/T 17446 and GB/T 15706-2012 and the
following apply to this document.
4 List of significant hazards
Table A.1 lists the significant hazards associated with the use of hydraulic fluid
power in a machine.
5 General rules and safety requirements
If leakage (internal or external) occurs, it shall not cause a hazard.
All components, assemblies or piping having a mass greater than 15 kg shall
have provision(s) for lifting by means of lifting devices.
6 Verification of safety requirements and acceptance testing
The hydraulic system shall be subjected to a combination of inspection and
testing to verify that
7 Information for use
For service or replacement of components in safety-related parts of control
systems, information shall be provided relating to service life and mission time.
If the wrong direction of rotation can cause a hazard, the correct direction of
rotation of the pump and motor shall be clearly and distinctly identified.
8 Identification statement
It is recommended to manufacturers who have chosen to conform to this
Standard that the following statement be used in test reports, catalogues and
sales literature. “Hydraulic systems and their components are in accordance
with GB/T 3766-2015, Hydraulic fluid power - General rules and safety
requirements for systems and their components”.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Price & DeliveryUS$175.00 · In stock · Download in 9 secondsGB/T 3766-2015: Hydraulic fluid power -- General rules and safety requirements for systems and their components Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 3766-2015 be delivered?Answer: The full copy PDF of English version of GB/T 3766-2015 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 3766-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3766-2015_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 3766-2015 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 3766-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3766-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 3766-2015?A step-by-step guide to download PDF of GB/T 3766-2015_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 3766-2015".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|