Powered by Google www.ChineseStandard.net Database: 189760 (20 Apr 2024)

GB/T 33460-2016 (GBT33460-2016)

GB/T 33460-2016_English: PDF (GBT 33460-2016, GBT33460-2016)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 33460-2016English70 Add to Cart 0--9 seconds. Auto-delivery Specifications for compiling dismantling manual of end-of-life vehicles Valid GB/T 33460-2016

BASIC DATA
Standard ID GB/T 33460-2016 (GB/T33460-2016)
Description (Translated English) Specifications for compiling dismantling manual of end-of-life vehicles
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard T40
Classification of International Standard 43.020
Word Count Estimation 6,654
Date of Issue 2016-12-30
Date of Implementation 2017-07-01
Drafting Organization China Automotive Technology Research Center, Shanghai Volkswagen Automobile Co., Ltd., Hunan Bangpu Scrapped Car Circulation Co., Ltd., Green America Co., Ltd.
Administrative Organization People's Republic of China Ministry of Commerce
Regulation (derived from) National Standard Notice No.27 of 2016
Proposing organization People Republic of China Ministry of Commerce
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China, China National Standardization Administration Committee

Standards related to: GB/T 33460-2016

GB/T 33460-2016
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.020
T 40
Specifications for Compiling
Dismantling Manual of End-of-Life Vehicles
ISSUED ON. DECEMBER 30, 2016
IMPLEMENTED ON. JULY 01, 2017
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Terms and Definitions ... 4
4 General Compiling Principle ... 5
5 Compiling Entries and Requirements ... 6
Foreword
This Standard was drafted as per the rules specified in GB/T 1.1-2009.
This Standard was proposed by and under the jurisdiction of Ministry of Commerce of
the PRC.
Drafting organizations of this Standard. China Automotive Technology & Research
Center, Shanghai Volkswagen Co., Ltd., Hunan Brunp End-of-Life Vehicles Recycling
Co., Ltd., GEM Co., Ltd.
Chief drafting staffs of this Standard. Guo Miao, Xu Shujie, Shen Jian, Zhang Tongzhu,
Dong Changqing, Yu Haijun, and Li Zhizhuan.
Specifications for Compiling
Dismantling Manual of End-of-Life Vehicles
1 Scope
This Standard specifies the compiling terms and definitions, general compiling
principles, compiling entries and requirements for the dismantling manual (hereinafter
referred to as manual) of end-of-life vehicles.
This Standard is applicable to the compiling for M1, N1 vehicle enterprises manuals;
while the compiling for other types of vehicles enterprises manuals can refer to.
NOTE. M1, N1 types of vehicles can refer to GB/T 15089.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB 2894 Safety Signs and Guideline for the Use
GB 3100 The International System of Units and Its Application
GB 4094 Motor Vehicles - Symbols for Controls, Indicators and Tell-Tales
GB 22128-2008 Technical Specifications for End-of-Life Vehicles Recycling and
Dismantling Enterprise
HJ 348 Environmental Protection Technical Specifications for Disassembly of End-
of-Life Vehicles
3 Terms and Definitions
The following terms and definitions are applicable to this document.
3.1 End-of-life vehicles. ELVs
Vehicles that reach the state motor vehicles’ mandatory scrapping standard.
5.5.2 The safety warning instructions shall uniformly and carefully explain the safety
markings quoted in the Manual, which shall conform to the provisions of GB 2894.
5.6 Vehicle dismantling process and instructions
5.6.1 General requirements
5.6.1.1 The vehicle dismantling process and instructions shall contain two stages
contents of pretreatment and removal. The enterprise shall, according to the vehicle
model actual structure and configuration situation, combining the actual situation of the
dismantling enterprise, supplement or delete against this Standard involved part scope.
5.6.1.2 The Manual shall carefully instruct the relevant part information involved in
each section, the specifically involved contents and requirements are as follows.
a) Graphic information. The graphic information shall demonstrate the position and
shape of parts in the vehicle; if necessary, accompanied by the text instructions.
b) Component name, position, quantity, quality and main materials information. It
includes the part name, installation position, quantity, quality (reference value),
main materials and the like information; accompanied by necessary text
instructions; guide the dismantling personnel to efficiently classify and recover
the parts and materials.
c) Fastening methods, dismantling tools, dismantling methods, recycling
instructions, etc. It includes the parts used fastening method, dismantling tools
and dismantling methods, and the like information.
d) Storage requirements. The dismantling parts and materials that have special
requirements for storage shall include the storage instructions.
e) Precautions. It shall include the flammable, explosive, corrosive and other
dangerous tips; confirm the prohibited behavior, correct self-protection behavior
during the dismantling process; so that efficiently ensure the personal safety of
the dismantling personnel and reduce the environmental damage.
5.6.2 Pretreatment
5.6.2.1 The description and instruction of parts involved in the pretreatment process
shall conform to the provisions of GB 4094 for the benefit of dismantling personnel.
During the dismantling operation, special attention shall be paid to the safety,
environmental protection, and operation requirements; it shall be accompanied with
necessary text instructions, so that ensure the Manual precautions brief and eye-
catching.
5.6.2.2 The pretreatment shall instruction the following contents according to the
requirements of 5.6.1.
...