GB/T 33166-2016 PDF English
US$90.00 · In stock · Download in 9 secondsGB/T 33166-2016: Hot-rolled steel plate, sheet and strip for automobile axle housings Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 33166-2016 | English | 90 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Hot-rolled steel plate, sheet and strip for automobile axle housings
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 33166-2016
GB/T 33166-2016: Hot-rolled steel plate, sheet and strip for automobile axle housings---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT33166-2016
GB
NATIONAL STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 77.140.50
H 46
Hot-rolled steel plate, sheet and
strip for automobile axle housings
Issued on: OCTOBER 13, 2016
Implemented on: SEPTEMBER 1, 2017
Issued by. General Administration of Quality Supervision, Inspection
and Quarantine;
Standardization Administration Committee.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Expression method of designation ... 6
4 Order content ... 6
5 Size, shape, weight and tolerance ... 7
6 Technical requirements ... 7
7 Special requirements ... 10
8 Test methods ... 10
9 Inspection rules ... 10
10 Packaging, marks and quality certificate ... 10
Foreword
This Standard was drafted in accordance with the rules given in GB/T
1.1-2009.
This Standard was proposed by China Steel Industry Association.
This Standard shall be under the jurisdiction of National Technical Committee
on Steel of Standardization Administration of China (SAC/TC 183).
The drafting organizations of this Standard. Jiangyin XingCheng Special
Steel Works Co., Ltd., Shougang Group, Metallurgical Engineering and
Accreditation Research Institute, Fujian Sangang Group Co., LTD, Wuhan
Steel Technology Co., Ltd.
Main drafters of this Standard. Wu Jianpeng, Wang Baolin, Wu Zhaohui,
Zhang Weixu, Liu Jianfeng, Liu Meihong, Qian Gang, Zhang Zhengquan,
Zhou Junyi.
Hot-rolled steel plate, sheet and
strip for automobile axle housings
1 Scope
This Standard specifies the expression method of designation, order, size,
shape, weight and tolerance, technical requirements, special requirements,
test methods, inspection rules, packaging, marks and quality certificate of
hot-rolled steel plate, sheet and strip for automobile axle housings.
This Standard is applicable to hot-rolled steel plate, sheet and strip of which
the thickness is 2.0 mm ~ 18.0 mm, for production of automobile axle
housings (hereinafter referred to as steel plate, sheet and strip).
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including
any amendments) applies.
GB/T 222, Spring steels
GB/T 223.5, Methods for chemical analysis of iron, steel and alloy - The
reduced molybdosilicate spectrophotometric method for the determination
of acid-soluble silicon content
GB/T 223.12, Methods for chemical analysis of iron, steel and alloy--The
sodium carbonate separation-diphenyl carbazide photometric method for
the determination of chromium content
GB/T 223.19, Methods for chemical analysis of iron, steel and alloy - The
neocuproine-chloroform extraction photometric method for the
determination of copper content
GB/T 223.23, Iron, Steel and Alloy - Determination of Nickel Content - The
Dimethylglyoxime Spectrophotometric Method
GB/T 223.40, Iron, Steel and Alloy - Determination of Niobium Content by
the Sulphochlorophenol S Spectrophotometric Method
GB/T 223.59, Iron, Steel and Alloy - Determination of Phosphorus Content
- Bismuth Phosphomolybdate Blue Spectrophotometric Method and
Antimony Phosphomolybdate Blue Spectrophotometric Method
GB/T 223.64, Iron, Steel and Alloy - Determination of Manganese Content
- Flame Atomic Absorption Spectrometric Method
GB/T 223.76, Methods for chemical analysis of iron, steel and alloy - The
flame atomic absorption spectrometric method for the determination of
vanadium content
GB/T 223.85, Steel and iron - Determination of sulfur content - Infrared
absorption method after combustion in an induction furnace
GB/T 223.86, Steel and iron - Determination of total carbon content -
Infrared absorption method after combustion in an induction furnace
GB/T 226, Etch test for macrostructure and defect of steels
GB/T 228.1, Metallic materials - Tensile testing - Part 1. Method of test at
room temperature
GB/T 229, Metallic Materials - Charpy Pendulum Impact Test Method
GB/T 232, Metallic materials--Bend test
GB/T 247, General rule of acceptance, package, mark and certification for
steel plates(sheets) and strips
GB/T 709, Dimension, shape, weight and tolerances for hot-rolled steel
plates and sheets
GB/T 2975, Steel and Steel Products - Location and Preparation of Test
Pieces for Mechanical Testing
GB/T 4336, Carbon and low-alloy steel - Determination of multi-element
contents - Spark discharge atomic emission spectrometric method (routine
method)
GB/T 6394, Metal - Methods for estimating the average grain size
GB/T 8170, Rules of rounding off for numerical values & expression and
judgement of limiting values
GB/T 10561-2005, Steel - Determination of Content of Nonmetallic
Inclusions - Micrographic Method Using Standards Diagrams
GB/T 13299, Steel - Determination of microstructure
GB/T 17505, Steel and steel products General technical delivery
the defective part shall not exceed 6% of the total length of each coil.
7 Special requirements
As required by the purchaser, agreed by the supplier and the purchaser, steel
plate, sheet and strip of other special requirements such as low temperature
impact performance shall be supplied.
8 Test methods
8.1 The chemical composition analysis method of steel shall be carried out
according to the provisions of GB/T 223.5, GB/T 223.12, GB/T 223.19, GB/T
223.23, GB/T 223.40, GB/T 223.59, GB/T 223.64, GB/T 223.76, GB/T
223.85,GB/T 223.86,GB/T 4336,GB/T 20123 or general method. But the
arbitration shall be in accordance with the provisions of GB/T 223.5, GB/T
223.12, GB/T 223.19, GB/T 223.23, GB/T 223.40, GB/T 223.59, GB/T 223.64,
GB/T 223.76, GB/T 223.85, GB/T 223.86.
8.2 The inspection items and test methods of each batch of steel plate,
sheet and strip shall comply with the provisions of Table 5.
9 Inspection rules
9.1 The steel plate, sheet and strip shall be inspected and accepted by the
quality and technical supervision department of the supplier.
9.2 The steel plate, sheet and strip shall be inspected in batches. Each
batch shall consist of same furnace number, same thickness, same
designation, same delivery status or same heat treatment system.
9.3 The sampling quantity and sampling method of steel plate, sheet and
strip shall comply with the provisions of Table 5.
9.4 The re-inspection and determination of steel plate, sheet and strip shall
comply with the provisions of GB/T 17505.
9.5 The mechanical properties and chemical composition test results shall
use rounding value comparison method for rounding. The rounding rules shall
be in accordance with the provisions of GB/T 8170.
10 Packaging, marks and quality certificate
The packaging, marks and quality certificate of steel plate, sheet and strip
shall comply with the provisions of GB/T 247.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 33166-2016 be delivered?Answer: The full copy PDF of English version of GB/T 33166-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 33166-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33166-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 33166-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 33166-2016?A step-by-step guide to download PDF of GB/T 33166-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 33166-2016".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|