GB/T 33014.10-2020 PDF English
US$155.00 · In stock · Download in 9 secondsGB/T 33014.10-2020: Road vehicles. Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy - Part 10: Immunity to conducted disturbances in the extended audio frequency range Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 33014.10-2020 | English | 155 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Road vehicles. Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy - Part 10: Immunity to conducted disturbances in the extended audio frequency range
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 33014.10-2020
GB/T 33014.10-2020: Road vehicles. Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy - Part 10: Immunity to conducted disturbances in the extended audio frequency range
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT33014.10-2020
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.040.10
T 36
Road vehicles - Component test methods for
electrical/electronic disturbances from narrowband radiated
electromagnetic energy - Part 10.Immunity to conducted
disturbances in the extended audio frequency range
(ISO 11452-10.2009, Road vehicles - Component test methods for electrical
disturbances from narrowband radiated electromagnetic energy - Part 10.Immunity
to conducted disturbances in the extended audio frequency range, MOD)
Issued on. DECEMBER 14, 2020
Implemented on. JULY 01, 2021
Issued by. State Administration for Market Regulation;
Standardization Administration of the PRC.
Table of Contents
Foreword... 3
1 Scope... 5
2 Normative references... 5
3 Terms and definitions... 5
4 Test conditions... 6
5 Test location... 6
6 Test apparatus... 6
7 Test set-up... 8
8 Test method... 8
Annex A (Informative) Function performance status classification (FPSC)... 11
Annex B (Informative) Verification for source impedance... 12
Foreword
GB/T 33014 "Road vehicles - Component test methods for electrical/electronic
disturbances from narrowband radiated electromagnetic energy" is intended to
include the following parts.
- Part 1.General;
- Part 2.Absorber-lined shielded enclosure;
- Part 3.Transverse electromagnetic (TEM) cell;
- Part 4.Bulk current injection (BCI);
- Part 5.Strip line;
- Part 7.Direct injection of radio frequency power;
- Part 8.Magnetic field immunity method;
- Part 9.Portable transmitter method;
- Part 10.Immunity to conducted disturbances in the extended audio
frequency range;
- Part 11.Reverberation chamber method.
This Part is Part 10 of GB/T 33014.
This Part is drafted in accordance with the rules given in GB/T 1.1-2009.
This Part uses the redraft law to modify and adopt ISO 11452-10.2009 "Road
vehicles - Component test methods for electrical disturbances from narrowband
radiated electromagnetic energy - Part 10.Immunity to conducted disturbances
in the extended audio frequency range".
The technical differences between this Part and ISO 11452-10.2009 and their
reasons are as follows.
- As for the normative references, this Part has made adjustments with
technical differences, to adapt to the technical conditions of China. The
adjustments are mainly reflected in Clause 2 “Normative references”. The
specific adjustments are as follows.
Replace ISO 11452-1 with GB/T 33014.1, which modifies and adopts
the international standard.
- Modify the notes in Table A.1.
- ADD annotations for category 1, category 2, and category 3 in Annex A.
This Part has made the following editorial changes.
- In order to be consistent with China's technical standard system, change
the standard name to "Road vehicles - Component test methods for
electrical/electronic disturbances from narrowband radiated
electromagnetic energy - Part 10.Immunity to conducted disturbances in
the extended audio frequency range";
- In accordance with the requirements of GB/T 1.1-2009, standardize the
writing of Clause 1;
- Simplify the title of Figure 1.
This Part was proposed by Ministry of Industry and Information Technology of
the PRC.
This Part shall be under the jurisdiction of National Technical Committee of Auto
Standardization (SAC/TC 114).
Drafting organizations of this Part. China Automotive Technology and Research
Center Co., Ltd.; China Electronics Standardization Institute; Beijing Audeco
Auto Electronic Product Testing Co., Ltd.; Changchun Automotive Test Center
Co., Ltd.; SAIC Volkswagen Automotive Co., Ltd.; Technical Center of SAIC
Motor Corporation Limited; Xiangyang Da An Automobile Test Center Co., Ltd.;
Shanghai Electrical Apparatus Research Institute; Zhengzhou Yutong Bus Co.,
Ltd.; SAIC GM Wuling Automobile Co., Ltd.; Brilliance Auto Group Holdings Co.,
Ltd.; Chery Automobile Co., Ltd.; Great Wall Motor Co., Ltd.; Commercial
Vehicle Technical Center of SAIC Motor Corporation Limited; The Fifth
Electronics Research Institute of the Ministry of Industry and Information
Technology; Geely Automobile Research Institute (Ningbo) Co., Ltd.; Centre
Testing International (Ningbo) Co., Ltd.; Anhui Jianghuai Automobile Group
Corp., Ltd.; China FAW Group Co., Ltd.; Shanghai NIO Automobile Co., Ltd.;
Hangzhou Branch of Zhejiang Zotye Automobile Manufacturing Co., Ltd.;
South East (Fujian) Motor Corp., Ltd.; Daimler Greater China Ltd.; Nissan
(China) Investment Co., Ltd.; Chery Jaguar Land Rover Automotive Co., Ltd.;
Qoros Automotive Co., Ltd.
Main drafters of this Part. Xu Xiuxiang, Cui Qiang, Bai Yunfei, Lv Gang, Liu
Xinliang, Wang Hongwu, Yang Xiaosong, Liu Haiming, Lu Changjun, Deng Fuqi,
Pan Qingmei, Mi Jincai, Liu Lijuan, Wang Fei, Zhang Gaojie, Shen Xiaobin, Ma
Qian, Xu Zhanchuan, Li Xingyu, Chen Weijian, Wang Wei, Shen Changhai,
Zheng Yanting, Li Yinan, Dong Eryi, Shen Biao, Geng Dan.
Road vehicles - Component test methods for
electrical/electronic disturbances from narrowband
radiated electromagnetic energy - Part 10.Immunity to
conducted disturbances in the extended audio
frequency range
1 Scope
This Part of GB/T 33014 specifies component test methods for
electrical/electronic (ESA) disturbances from continuous narrowband radiated
electromagnetic energy - immunity to conducted disturbances in the extended
audio frequency range.
2 Normative references
The following documents are indispensable for the application of this document.
For the dated references, only the editions with the dates indicated are
applicable to this document. For the undated references, the latest edition
(including all the amendments) are applicable to this document.
GB/T 33014.1 Road vehicles - Component test methods for
electrical/electronic disturbances from narrowband radiated electromagnetic
energy - Part 1.General (GB/T 33014.1-2016, ISO 11452-1.2005, MOD)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T
33014.1 apply.
4 Test conditions
The applicable frequency range of immunity to conducted disturbances in the
extended audio frequency range is 15 Hz~250 kHz. The user shall specify the
test severity level or levels over the frequency bands (see Annex A).
5 Test location
This test does not require special grounding or shielding in the laboratory.
6 Test apparatus
A 100 μF capacitor may be used (for lines other than power lines) to shunt
the source end of the isolation transformer to ground if difficulty is encountered
in obtaining sufficient test voltage. Verification shall be made that desired
signals are not excessively disturbed by the 100 μF capacitor.
7 Test set-up
The test set-up is shown in Figure 1.A d.c. power amplifier that satisfies the
source impedance requirement of this Part and can supply the power required
by the DUT may be substituted for the power amplifier and isolation transformer
for power supply lead testing.
8 Test method
During the test, filters incorporated into DUTs may experience excessive and
potentially damaging current flow. To prevent this type of over stress in the DUT,
a current probe is included in the test set-up.
The system power supply voltage shall be set as specified in the test plan and
shall be measured at the DUT to account for voltage drop in the isolation
transformer secondary winding.
Annex A
(Informative)
Function performance status classification (FPSC)
This annex gives examples of test severity levels. For details of FPSC, see
GB/T 33014.1.
Annex B
(Informative)
Verification for source impedance
The following procedure can be used to verify the signal source impedance at
the isolation transformer secondary terminals.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 33014.10-2020 be delivered?Answer: The full copy PDF of English version of GB/T 33014.10-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 33014.10-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33014.10-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 33014.10-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 33014.10-2020?A step-by-step guide to download PDF of GB/T 33014.10-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 33014.10-2020".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|